WHL3

channel image
subscribers

In this video I run a command at start on Raspberry Pi OS using crontab -e. This will work on any gnu/linux distro but this example it is on a Raspberry Pi.

In this video I control a HVAC relay using a Raspberry Pi and a NodeJS web server.
Prerequisite:
https://www.bitchute.com/video/67DPQohy131g/

Run your server at start up:
https://www.bitchute.com/video/KMw0p9fGCPm9/

The code can be found at https://odysee.com/@WHL3:1/Controlling-a-HVAC-Relay-WIth-a-NodeJS-Web-Server-and-a-Raspberry-Pi:2

In this video I go over how to control a type b plug using and Raspberry Pi and a HVAC relay. I use the GPIO pins and Python 3 to turn on and off the relay controlling the type b plug.
Follow up video: https://www.bitchute.com/video/xuIFd5D1GTt7/

In this video I install a 4000 watt dc to ac inverter in a pickup. I also take the truck and and test the inverter out to get some side road cooking done.
Warning:
Warning replicating anything seen in this video may result in injury or harm if used incorrectly. This video is made for educational purposes but no one should replicate anything in this video. If you intend to do anything similar it is highly recommended that you seek professional guidance and training prior to attempting anything similar.

In this video I install a 4000 watt dc to ac inverter in a pickup. I tried my best to repair the audio in this video, I will do a second video and narrate it because the audio did not come out good using the built in microphone on the camera.
Warning:
Warning replicating anything seen in this video may result in injury or harm if used incorrectly. This video is made for educational purposes but no one should replicate anything in this video. If you intend to do anything similar it is highly recommended that you seek professional guidance and training prior to attempting anything similar.

In this video I go over how to install and get started with a VNC server and
viewer on Ubuntu Mate 23.10 on a Raspberry Pi.
More information can be found on the Ubuntu Mate version of the video: https://www.bitchute.com/video/e4rxSEXVE9IS/
https://rumble.com/v3kuh7k-remote-desktop-ubuntu-22.04.html
The script I used is listed below:
#!/bin/bash
gsettings set org.gnome.Vino prompt-enabled false
gsettings set org.gnome.Vino authentication-methods "['vnc']"
gsettings set org.gnome.Vino vnc-password $(echo -n 'test' | base64)
/usr/lib/vino/vino-server
exit 0

In this video I go over how to wire a HVAC solid state relay to control a type b plug(United States Standard AC wall outlet) and how to use a parallel port of a computer to turn on and off the relay. The wire colors shown are consistent with the standard wire colors used in construction, that use NM sheathed electrical cable.
This video can be used with three other videos to control outlets via a web server.
1. HOW TO CONTROL THE PARALLEL PORT DATA PINS WITH A WEB SERVER https://www.bitchute.com/video/uaGFOnTcnuGB/
2. How To Find Your Parallel Port Address on Linux https://www.bitchute.com/video/4csxAgjpmt1j/
3. How To Control The Parallel Port Data Pins Linux https://www.bitchute.com/video/Zl8ktsobi5P6/

Warning:
Warning replicating anything seen in this video may result in injury or harm if used incorrectly. This video is made for educational purposes but no one should replicate anything in this video. If you intend to do anything similar it is highly recommended that you seek professional guidance and training prior to attempting anything similar.

In this video I show how to align audio and video tracks with audacity using tempo.

In this video I go over how to install "linux" from the settings menu and get started with it using "Linux Files" and apt-get.

In this video I go over how to install Dosbox v0.74-3 on Ubuntu Mate 23.04 and how to run Doom using it.

In this video I over how to control the data pins on the parallel port using a web server.

Warning:
Warning replicating anything seen in this video may result in injury or harm if used incorrectly. This video is made for educational purposes but no one should replicate anything in this video. If you intend to do anything similar it is highly recommended that you seek professional guidance and training prior to attempting anything similar.

This is a fictional writing project I stated many years ago that I plan to finish, my life has been derailed over the past few years but despite the people who wish me ill I am getting it back and over the next few years I plan on finishing this project. This is a preview and it only is the first four pages.

In this video I go over how to find your parallel port address on Linux

In this video I go over how to use the parallel port to control LEDs and relays using a C application on Linux.
Source Code Link:
https://github.com/williamhlane/ParC.git
Source Code:
#include <stdio.h>
#include <unistd.h>
#include <sys/io.h>
#define PortAddress (0x0378)
int main()
{
int number;
printf("Enter the value for the pins you'd like to activate.");
scanf("%d", &number);
if (ioperm(PortAddress, 1, 1))
{
printf("ioperm(%x) failed. Are you root?", PortAddress);
return 1;
}
outb(number, PortAddress);
return 0;
}

Warning:
Warning replicating anything seen in this video may result in injury or harm if used incorrectly. This video is made for educational purposes but no one should replicate anything in this video. If you intend to do anything similar it is highly recommended that you seek professional guidance and training prior to attempting anything similar.

If this video does not load it can be found on rumble as well:
This is a link to it on Rumble.... https://rumble.com/v2y6bcu-vino-and-vinagre-vnc-remote-desktop-ubuntu-mate-23.04.html
In this video I go over how to install and get started with a VNC server and viewer on Ubuntu Mate 23.04. The server is Vino while the viewer is Vinagre. The script I used is listed below:
#!/bin/bash
gsettings set org.gnome.Vino prompt-enabled false
gsettings set org.gnome.Vino authentication-methods "['vnc']"
gsettings set org.gnome.Vino vnc-password $(echo -n 'test' | base64)
/usr/lib/vino/vino-server
exit 0

In this video I go over how to create and run bash scripts, Python scripts and C applications on LINUX.

In this video I go over how to add using binary.

In this video I go over how to install and get started with a VNC server and
viewer on Ubuntu Mate 23.04. The server is Vino while the viewer is Vinagre.
More information can be found on the Ubuntu Mate version of the video: https://www.bitchute.com/video/e4rxSEXVE9IS/
be fond on the
The script I used is listed below:
#!/bin/bash
gsettings set org.gnome.Vino prompt-enabled false
gsettings set org.gnome.Vino authentication-methods "['vnc']"
gsettings set org.gnome.Vino vnc-password $(echo -n 'test' | base64)
/usr/lib/vino/vino-server
exit 0

SHOW MORE

Created 11 months, 2 weeks ago.

29 videos

Category Science & Technology

In this channel it is mostly howto and mostly with Linux computers, however miss angel likes to travel and sometimes it is just a video of her trip, sometimes it is how to on other things that have to do with cars, tucks or construction.

https://twitter.com/WHL_3

https://www.quora.com/profile/William-Lane-337

https://rumble.com/c/c-3398224

https://odysee.com/@WHL3:1?view=content

https://www.bitchute.com/channel/PRadaieBIDum/

This warning applies to all video made and posted on this channel: Warning replicating anything seen in this video may result in injury or harm if used incorrectly. This video is made for educational purposes but no one should replicate anything in this video. If you intend to do anything similar it is highly recommended that you seek professional guidance and training prior to attempting anything similar.