Went to our buddies to grab our Walnut order that got delivered to his shop , he grabbed it with his Kubota SSV 75 skid steer , man Lumber is getting expensive. this load cost just over $1800 . it's just over 100 board feet.

thanks for watching

Hello Everyone, in this video, we are doing a Celtic style shield engrave , we are using 3/4 inch ply painted black. this is going to be a shop wall hanger , we recently did maintenance to our cnc and flattened the waste board , so this was to see if the V-Carve was nice and even , and it was , finally 😀

Machine - Shapeoko 3 XXL
Thanks for watching

Ways to support the channel

Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store

Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E

#woodworking #cnc #test
Hello everyone , Matt Here from the Alexander Bros Woodworking , In todays video I am Doing what is hopefully the last test engrave for this sign we are doing for a local motorcycle club . The other tests we did were way too deep and looked like garbage .

We are using 3/4 maple plywood painted black so we can see the contrast from the carve . We are using a 1/8th bit to pocket out the majority of the material and follow up with a 1/4 60 degree Vee bit for the rest .

Machine - Shapeoko 3 XXL
Thanks for watching

Ways to support the channel

Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store

Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E

We are trying to dial in the depth for this local motorcycle clubs sign .
we are having an issue where the depth we set in the programming is different from the outcome , and we think the CNC is not running flat , as we know the bed waste board is flat , going to have to do more adjustment's I think , thanks for watching

Check out our Online store https://www.thealexanderbroswoodworking.com/our-store

Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E

added some copper colored epoxy to this slab to fill in holes and cracks , and man there was lots of micro cracks.

Sanding off copper colored epoxy off a walnut slab ,that we are making into a breakfast nook shelf for a client

We have a lot of scrap wood we had glued up into cutting board blanks that were too thin or too small , so we decided to cut them up and make end grain cutting boards.

Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store

Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E

This is part 2 of the shop sign . here we clear it , to seal it before painting it black , then sand it off #woodworking #wood #sandingmachine

Ways to support the channel

Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store

Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E

#woodworking #wood #cnc
Hello everyone, in this video we are carving a new sign for our shop , we are using our Shapeoko 3 XXL .
The wood we chose was Cherry as we find it carves very nice . the carve in total was 3.5 hours.
this is a edited version of the livestream

Ways to support the channel

Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store

Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E

We are carving our new logo for a shop sign on our shapeoko 3 XXL cnc
we are using cherry lumber , sign is 12x12 ( pocketed area )
#woodworking #cnc #logo

#woodworking
We visited our buddy Nathan today ,we sanded up some slabs using his Felder FW 950 Wide Belt Sander. The 2 slabs are a table top that we are refinishing and flattening for a client

Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store

Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E

While visiting our buddies woodshop he showed us his new toy. The OMEC 650A Dovetail Machine, and boy oh boy it is fast and so much easier.

Check out our Online store https://www.thealexanderbroswoodworking.com/our-store

Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E

#woodworking
We visited our buddy Nathan today ,we sanded up some slabs using his Felder FW 950 Wide Belt Sander. the cookie slab is the one we flattened on our CNC and sanded the epoxy off , this was just to make sure it was flat for the customer ( he is doing all the finish sanding himself )

Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store

Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E

#woodworking

We visited our buddy Nathan today ,we sanded up some slabs using his Felder Wide Belt Sander. The 2 first slabs are a table top that we are refinishing and flattening for a client the cookie slab is the one we flattened on our CNC and sanded the epoxy off , this was just to make sure it was flat for the customer ( he is doing all the finish sanding himself )

Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store

Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E

In this stream we are staining the 2x4's and 4x4's Black with INDIA INK

ways to support our channel more directly links
OUR STORE
https://www.thealexanderbroswoodworking.com/our-store

PayPal
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E