Carl Bright

Carl Bright

Carl Bright

subscribers

Red Flag Setup

What a wonderful fun time we all had during the 2020 Rocky Mountain Race Week 2.0!

632 Big Block Chevy Tall Deck Differences

None

At the August 15th 2020 dratstrip in Tulsa Oklahoma, I had some great fun with many friends!

I took my driveshaft out and checked the length of engagement inside the transmission to make sure that it was not bottoming out! If the yoke bottoms out then the transmission can easily be damaged with 800 HP hitting it at the wrong angle. After that some fun hitting the track with my 1972 El Camino!

What a great time in the El Camino at my new best track! This is some work on a 1972 El Camino race truck. It is a street car first, a drag car second. It has a 632 Blue print engines crate motor, a 4L85E transmission, Compushift II controller, 4:11 rear gears with a strange rear end setup, normal 4 link in back with heim joints, and a S-locker for the rear end. It normally does 10's in the quarter.

In 2020 we had a blast on the third day of RMRW. Hope you enjoy! This is some work on a 1972 El Camino race truck. It is a street car first, a drag car second. It has a 632 Blue print engines crate motor, a 4L85E transmission, Compushift II controller, 4:11 rear gears with a strange rear end setup, normal 4 link in back with heim joints, and a S-locker for the rear end. It normally does 10's in the quarter.

What fun it was running around the states and hitting some tracks with my friends! This is some work on a 1972 El Camino race truck. It is a street car first, a drag car second. It has a 632 Blue print engines crate motor, a 4L85E transmission, Compushift II controller, 4:11 rear gears with a strange rear end setup, normal 4 link in back with heim joints, and a S-locker for the rear end. It normally does 10's in the quarter.

This is some work on a 1972 El Camino race truck. It is a street car first, a drag car second. It has a 632 Blue print engines crate motor, a 4L85E transmission, Compushift II controller, 4:11 rear gears with a strange rear end setup, normal 4 link in back with heim joints, and a S-locker for the rear end. It normally does 10's in the quarter.

This is some work on a 1972 El Camino race truck. It is a street car first, a drag car second. It has a 632 Blue print engines crate motor, a 4L85E transmission, Compushift II controler, 4:11 rear gears with a strange rear end setup, normal 4 link in back with heim joints, and a S-locker for the rear end. It normally does 10's in the quarter.

This is some work on a 1972 El Camino race truck. It is a street car first, a drag car second. It has a 632 Blue print engines crate motor, a 4L85E transmission, Compushift II controler, 4:11 rear gears with a strange rear end setup, normal 4 link in back with heim joints, and a S-locker for the rear end. It normally does 10's in the quarter.

I had a great time at the zip tie drags in AZ! What fun!

I take a little time to bolt on the front end to the 1972 El Camino.

We are looking to mix up a lot of potting soil. What better way than to engineer and OVER BUILD something NEW!

I made a quick video on putting a roll cage into my El Camino. This should be good for 10 second passes.

For searches!
Roll Bar
Rollbar
Roll Cage
Rollcage

I take a minute and do some rust control on the 1972 El Camino.

In the middle of 2016, I started putting together my 1972 El Camino. A life long dream.

SHOW MORE

Created 4 months, 3 weeks ago.

18 videos

Category Auto & Vehicles

This is some work on a 1972 El Camino race truck. It is a street car first, a drag car second. It has a 632 Blue print engines crate motor, a 4L85E transmission, Compushift II controler, 4:11 rear gears with a strange rear end setup, normal 4 link in back with heim joints, and a S-locker for the rear end. It normally does 10's in the quarter.