Endless Money Pits

Replace the air filter on your C5 Corvette yourself and save some money!

NOTE:
Corvettes are sweet.

LINKS:
Air Filter: https://www.amazon.com/dp/B000C9TCA8/ref=cm_sw_em_r_mt_dp_PYA09Y2V6Q7VVAQKWG9X
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the headlight switch on your Toyota Yaris yourself and save a bunch of money!

NOTE:
Always disconnect the battery and use extra caution when working with airbags.

LINKS:
Headlight Switch (fits 2007-2010 Yaris): https://www.autozone.com/electrical-and-lighting/turn-signal-switch/p/duralast-turn-signal-switch-sw8100/82218_0_0
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• Breaker bar
• Torque wrench
• A couple socket wrenches
• A couple socket extensions
• 19mm socket
• 10mm socket
• ¼ inch socket
• T30 torx bit
• Electric screwdriver
• Phillips screwdriver bit
• Needle nose pliers
• Flat head screwdriver
• And a tiny flat head screwdriver
For this job I also needed:
• Some tape
• Safety glasses
• A paint marker
• Some medium strength thread locker
• And a new headlight switch

MUSIC NOT PROVIDED BY YOUTUBE:
“Piece Pipe” by Seth Schneider - [email protected]

A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the thermostat and coolant temp sensor on your Ford Taurus or Mercury Sable yourself and save some money!

NOTE:
Coolant is toxic stuff – please keep it away from animals.

LINKS:
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• Breaker bar
• Socket wrench
• Socket extension
• 19mm deep socket
• 10mm socket
• 5/16 socket
• Universal socket joint
• Channel locks
For this job I also needed:
• Some coolant to top off the system
• Thermostat
• Coolant temperature sensor
• Gasket maker made specifically for cooling systems
• A razor blade
• Steel wool
• And a funnel

A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the drive belt on your Toyota Yaris yourself and save some money!

NOTE:
Let the engine cool down before working on it so you don’t get burned.

LINKS:
New belt: https://www.amazon.com/dp/B000C2UJLQ/ref=cm_sw_em_r_mt_dp_8K4KM84H57PETS1BGERT
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• Pry bar
• Socket wrench
• And a 12mm socket
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace your engine’s IAC yourself and save some money!

NOTE:
Sorry for talking so much in this video. There was too much info that I didn’t want to cut out.

LINKS:
IAC Valve (Chinese): https://www.autozone.com/engine-management/idle-air-control-valve/p/valucraft-idle-air-control-valve-ac305vc/966179_0_0
Want to support my channel?
Become a patron!
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• 19mm wrench
• Electric screwdriver
• And a T25 torx bit
For this job I also needed:
• A mirror
• Q-tips
• Carburetor cleaner
• And a new Idle Air Control Valve. Link in description

A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the belt tensioner on your Jeep, Dodge, or Chrysler yourself and save some money!

LINKS:
Belt Tensioner for the 5.2 V8: https://www.autozone.com/external-eng...
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?lo...

TOOLS USED:
• Breaker bar
• Socket wrench
• 15mm socket
• 15mm wrench
• 10mm wrench
• Phillips head socket, or make one with:
• ¼” socket
• Phillips #3 bit
• And some tape

A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the spark plugs on your Honda CBR500R yourself and save a butt load of money!

NOTE:
• Only replace spark plugs after the engine has cooled. The aluminum threads in the engine head are very soft when hot, making them easier to strip.
• Do not use anti-seize on modern spark plugs.

LINKS:
Spark Plugs: https://www.partzilla.com/product/honda/31916-KRM-841
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• Socket wrench
• Socket extension
• 10mm socket
• 5/8 spark plug socket
• Two 10mm wrenches
• Electric screwdriver
• 5mm hex bit
• Needle nose pliers
• Two pairs of bent nose pliers
• Flat head screwdriver
• Tiny flat head screwdriver
• Angled pick
• Spark plug gap gauge

MUSIC NOT PROVIDED BY YOUTUBE:
“Piece Pipe” by Seth Schneider - [email protected]

A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Change the oil and filters on your KTM 690 or Husqvarna 701 yourself and save some money!

NOTE:
Please recycle your used automotive fluids!

LINKS:
KTM Oil Change Kit: https://www.amazon.com/dp/B01FI7QMDS/ref=cm_sw_em_r_mt_dp_7B4NMSQQJVABY6C846V7
Castrol 10w-50 Motorcycle Oil: https://www.amazon.com/dp/B008MISF54/ref=cm_sw_em_r_mt_dp_79HP12BSDKNCCJKGMBA9?_encoding=UTF8&psc=1
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• Breaker bar
• Torque wrench
• Socket wrench
• Socket extension
• Electric screwdriver
• 13mm socket
• 8mm socket
• T30 torx bit
• Angled pick
For this job I also needed:
• Kit with oil filters, screens, and o-rings
• 1.8 quarts ~ 1.7 liters of full synthetic 10W/50
• Funnel
• Gloves
• Fluid catch pan

MUSIC NOT PROVIDED BY YOUTUBE:
“Piece Pipe” by Seth Schneider - [email protected]

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Learn to remove the fairings gain access to things under the fuel tank on your cbr500r yourself and save some money!

LINKS:
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• Electric screwdriver
• 5mm hex bit
• Needle nose pliers
• Tiny flat head screwdriver
For getting under the fuel tank I also needed:
• Socket wrench
• Socket extension
• 10mm socket
• Flat head screwdriver
• Bent nose pliers
• Two wood blocks about this size: 2.5” ~ 6.5 cm, and 12.5” ~ 32 cm

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Adjust the clock on your Honda cbr500r, cb500f, or cb500x.

LINKS:
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Adjust the slack on your motorcycle chain yourself and save some money!

NOTE:
Never work around the drive chain with the engine running.
Be careful not to pinch any body parts between the chain and the sprockets.
Special thanks to Mark-ton Navarro Mabuti for providing a photo of the 2019+ style chain adjuster.

LINKS:
Chain Lube: https://www.amazon.com/gp/product/B001B0VDC2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Paint Marker: https://www.amazon.com/dp/B00KGCOZ9Y/ref=cm_sw_em_r_mt_dp_6YH8BT7FRB52325KFG7R?_encoding=UTF8&psc=1
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• Torque wrench
• Socket wrench
• 24mm socket
• 19mm wrench
• 14mm wrench
• 12mm wrench
• 10mm wrench
• 8mm hex wrench
• 5mm hex wrench
• Bent nose pliers
• And a measuring tape

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Flush the coolant in your Honda motorcycle yourself and save a lot of money!

NOTE:
Please recycle your used automotive fluids!
This video took me 35 hours to edit.

LINKS:
Coolant: https://www.amazon.com/gp/product/B0039OTLRW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Copper Washers: https://www.partzilla.com/product/honda/90463-ML7-000
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• Electric screwdriver
• 5mm hex bit
• Bent nose pliers
• Tiny flat head screwdriver
• Torque wrench
• Socket wrench
• 10mm socket
• 10mm wrench
• 5mm hex socket
• 5mm hex wrench
For this job I also needed:
• Running water
• Paint marker
• Funnel
• Two copper washers
• And two quarts of Pro Honda HP Coolant

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Clean and lube your motorcycle chain yourself regularly and save some money!

NOTE:
Never work around the drive chain with the engine running.
Be careful not to pinch any body parts between the chain and the sprockets.
I have the wrong type of master link. The chain on this bike should be a rivet style. We’ll fix that in another video.

LINKS:
Chain Brush: https://www.amazon.com/dp/B07RJ3YJ1N/ref=cm_sw_em_r_mt_dp_38C3BZKK22PFWTAYPBNY?_encoding=UTF8&psc=1
Paint Marker: https://www.amazon.com/dp/B00KGCOZ9Y/ref=cm_sw_em_r_mt_dp_6YH8BT7FRB52325KFG7R?_encoding=UTF8&psc=1
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• Chain brush
• Bent nose pliers
• 8mm hex wrench
• 5mm hex wrench
• 10mm wrench
• Flat head screwdriver
• And a paint marker
For this job I also needed:
• Kerosene
• Gloves
• A spray bottle
• And some rags

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the brake pads on your car yourself and save some money!

NOTE:
Thank you for watching 

LINKS:
Bosch Brake Pads: https://www.amazon.com/dp/B008HZOZ2E/ref=cm_sw_em_r_mt_dp_5DEY8QHBJDQNNW73DESG
Brake Caliper Tool: https://www.amazon.com/gp/product/B0122Q83T4/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&psc=1
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• Torque wrench
• Socket wrench
• 21mm socket
• 14mm socket
• Really old plastic mallet
• 14mm box wrench
• Impact driver
• Floor jack
• Jack stands
• And a brake caliper tool
For this job I also needed:
• A stool
• A light
• Gloves
• Turkey baster
• Plastic container
• And some brake pads

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the cooling fan in your BMW yourself and save some money!

LINKS:
Cooling System Overhaul Video: https://www.youtube.com/watch?v=U-SKGl7SydM&t
Mechanical Fan Removal: http://www.beisansystems.com/procedures/e46_mechanical_fan_procedure.htm
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US

TOOLS USED:
• Pliers
• Plastic prying tool
• T25 Torx bit
• Electric screwdriver
• And a plastic bowl

I’d like to thank the following Patreon supporters. Their generosity is appreciated more than they know:
• Elizabeth Y.

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the belts on your BMW yourself and save some money!

LINKS:
Cooling System Overhaul Video: https://www.youtube.com/watch?v=U-SKG...
Belt #1: https://www.amazon.com/gp/product/B00...
Belt #2: https://www.autozone.com/cooling-heat...
Mechanical Fan Removal: http://www.beisansystems.com/procedur...
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?lo...

TOOLS USED:
• Pliers
• Plastic prying tool
• T25 Torx bit
• Electric screwdriver
• Breaker bar
• T50 Torx socket
• And a plastic bowl

I’d like to thank the following Patreon supporters. Their generosity is appreciated more than they know:
• Elizabeth Y.

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Honda factory exhaust vs. Yoshimura R-77 exhaust comparison. These motorcycles have the same engine with minor differences. Mufflers are not interchangeable between these bikes.

NOTE:
Sorry for the clipping audio. This footage is leftover from a video I decided to abandon.

LINKS:
Yoshimura R-77 Exhaust: https://www.amazon.com/gp/product/B01H7S3KS6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Follow me on Instagram: https://www.instagram.com/endlessmoneypits/
Want to support my channel? Become a patron!: https://www.patreon.com/EndlessMoneyPits
Or donate to me via PayPal! https://paypal.me/EndlessMoneyPits?locale.x=en_US

I’d like to thank the following Patreon supporter. Their generosity is appreciated more than they know:
Elizabeth Younger

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Install an adjustable external voltage regulator yourself and save some money!

NOTE:
This video assumes you already know what voltage is necessary for your vehicle. Voltage that is too low will not charge your battery, and voltage that is too high can destroy the battery and other components of the vehicle’s electrical system. Perform this modification (and all others) at your own risk.

LINKS:
Quick Start Voltage Regulators and Kits: https://alternatorparts.com/external-voltage-regulator-high-output-alternator-kit.html
Follow me on Instagram: https://www.instagram.com/endlessmoneypits/
Want to support my channel? Donate to me via PayPal! https://paypal.me/EndlessMoneyPits?locale.x=en_US
Become a patron!: https://www.patreon.com/EndlessMoneyPits

TOOLS USED:
• A couple of socket wrenches
• Socket extension
• 10mm socket
• 3/8 socket
• 7mm socket
• 12mm wrench (10mm for factory battery terminals)
• Pliers
• Dikes
• Wire strippers
• Tiny flat head screwdriver
• Center punch
• Magnetic bowl
• Multimeter
• Circuit tester
• Heat gun
• Power drill
• 5/32 drill bit
For this job I also needed:
• Heat shrink tubing
• Dielectric grease
• Bungee cord
• Wire with alligator clip ends
• Paint marker
• Quick splice wire connector
• And sandpaper (400 grit or less)

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the spark plugs in your Toyota Yaris yourself and save some money!

NOTE:
Wait until your engine is cool before removing spark plugs to reduce the likelihood of stripping the aluminum threads. Do not overtighten spark plugs or anything else that bolts onto the engine.

LINKS:
NGK Iridium Spark Plugs: https://www.amazon.com/dp/B003BUCKQ8/ref=cm_sw_em_r_mt_dp_15EDJR6XJFEW4HJ1H7YD
Follow me on Instagram: https://www.instagram.com/endlessmoneypits/
Want to support my channel? Donate to me via PayPal! https://paypal.me/EndlessMoneyPits?locale.x=en_US
Become a patron!: https://www.patreon.com/EndlessMoneyPits

TOOLS REQUIRED:
• Socket wrench
• Socket extension
• 10mm socket
• 5/8 spark plug socket

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the differential fluid in your BMW yourself and save a lot of money!

NOTE:
Red Line fluids have worked best in my car over the years (not a sponsor).

LINKS:
Differential Fluid: https://www.amazon.com/dp/B000CPCBF0/ref=cm_sw_em_r_mt_dp_26WFXR8JY495TT5ZK2A4?_encoding=UTF8&psc=1
Bottle Pump: https://www.amazon.com/dp/B000BQW5LK/ref=cm_sw_em_r_mt_dp_TRJFJD9NJ7552BKXS50J?_encoding=UTF8&psc=1
Crush Washers: https://www.pelicanparts.com/More_Info/07119963355.htm?pn=07-11-9-963-355-M131
Follow me on Instagram: https://www.instagram.com/endlessmoneypits/
Want to support my channel? Become a patron!: https://www.patreon.com/EndlessMoneyPits

TOOLS & SUPPIES USED:
• Breaker bar
• Torque wrench
• Socket extension
• 14mm Hex socket
• Magnetic bowl
• Floor jack
• Jack stands
• Creeper
• 1.5 quarts of 75w90 synthetic gear oil
• Bottle pump
• Two crush washers size 22 X 27 X 1.5mm
• Nitrile gloves
• Shop light

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the cabin air filter in your BMW yourself and save some money!

LINKS:
Cabin Air Filter for e46: https://www.fcpeuro.com/products/bmw-cabin-air-filter-64319257504-1
Want to support my channel? Donate to me via PayPal! https://paypal.me/EndlessMoneyPits?locale.x=en_US
Become a patron!: https://www.patreon.com/EndlessMoneyPits
Follow me on Instagram: https://www.instagram.com/endlessmoneypits/

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Change the oil on your Ford Taurus yourself and save some money!

NOTE:
I couldn’t find a link to a reputable replacement gasket for the oil drain plug, but I’ve included a link to a magnetic drain plug to replace your old one.
Please recycle your used automotive fluids!

LINKS:
5w-20 Synthetic Oil: https://www.amazon.com/dp/B00TS9ZWAW/ref=cm_sw_em_r_mt_dp_BSSW685YQ7X58F0N8RS7
Oil Filter: https://www.amazon.com/dp/B000O0TAI4/ref=cm_sw_em_r_mt_dp_TYNRJA70D8HVXBVWPPW7
Magnetic Oil Drain Plug: https://www.amazon.com/dp/B07WHFGBJQ/ref=cm_sw_em_r_mt_dp_6VP5HJ396G4NFTP3SRKR

Follow me on Instagram: https://www.instagram.com/endlessmoneypits/
Want to support my channel? Donate to me via PayPal! https://paypal.me/EndlessMoneyPits?locale.x=en_US
Become a patron!: https://www.patreon.com/EndlessMoneyPits

TOOLS USED:
• Breaker bar with 1/2 inch drive
• Socket wrench with 3/4 inch drive
• Socket wrench with 1/2 inch drive
• Oil filter tool
• 5/8 inch socket
• Funnel
• Fluid drain pan
• Creeper
• Jack
• Jack stands

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Driving my Traxxas Rustler 4x4 VXL

This is just a bonus video for ya because I don't upload very regularly yet. More EMP videos coming soon!

Replace the headlight bulbs in your car yourself and save some money!

LINKS:
Sylvania 9003 Headlight Bulbs: https://www.amazon.com/dp/B0012UK3M2/...​
Dielectric Grease: https://www.amazon.com/dp/B000AL8VD2/...​
Toyota Plastic Pins: https://www.amazon.com/dp/B07X871MRS/...​
Follow me on Instagram: https://www.instagram.com/endlessmone...​
Enjoy my videos? Become a patron! https://www.patreon.com/EndlessMoneyPits​

TOOLS USED:
• Socket wrench
• 10 mm socket
• Socket extension
• Phillips screwdriver
• Needle nose pliers
• Flathead screwdriver

**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Change your oil at the best interval and save money!

NOTE:
You should change your oil at least once per year no matter how many miles have been driven.

LINKS:
Oil Change Video: https://www.youtube.com/watch?v=qIRasAJH-e8&t
Get your own automotive fluid analysis: https://www.blackstone-labs.com/
Sources of metals in engine oil: http://wearcheck.com/virtual_directories/Literature/Techdoc/WZA047.pdf
Enjoy my videos? Become a patron!: https://www.patreon.com/EndlessMoneyPits

**Disclaimer**
Due to the litigious world we live in, I have to make this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

SHOW MORE

Created 1 year, 2 months ago.

51 videos

Category Auto & Vehicles

D.I.Y. without the B.S.