You are about to action:
Object being modified by the action
Do you want to proceed?
If you wish to action:
Object being modified by the action
Then please send an email request to [email protected].
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
These are modern reproductions. They are not real artifacts.
(Updated March 2024)
This is not a live auction.
Auctions will begin at 3pm (Eastern Time) on Mondays and end Monday night (6 hours later) at 9pm (Eastern Time) the same day.
Try not to bid at the last minute. I may not see your bids, or your bids may not post in time.
I will be using YouTube's time tracker to be fair to everyone, but it's not always accurate.
Bid in the comment section.
I will pre-populate the comment section with comments that include the item numbers and a time stamp where the item appears in the video. Please bid under the appropriate comment.
I will monitor the comments periodically.
If you have a question, email me at [email protected]
I will announce the winner by commenting:
SOLD - Thank You! Please email me your name, address, and preferred method of payment to jackcrafty2@ gmail.com
Please be aware that there is no way for me to send you a PM unless I already have your email.
In your email to me, please include your YouTube name, real name, address, and preferred method of payment.
Shipping is free within the US.
INTERNATIONAL SHIPPING IS NOT FREE.
I will add $10 for light weight package (up to 1lb) and $20 for a heavy package (2lb or more). This is a simplification and a change from previous auctions.
I accept PayPal, Venmo, Cash App, Checks, or Money Orders. I can also send you an electronic invoice from "Jack Crafty Studios" to your email address that you can pay with a card.
I will issue refunds if needed. You don't need to ship the item(s) back.
If, for some reason, you can not pay, I will offer the item in the next auction.
I will sign all items (that are in a finished state) unless you don't want me to. Please let me know. My signature looks like this:
Jack
Crafty
PAB
(Year)
Shipping will be on Wednesday after the auction. All shipping will be done through the US Post office using First Class, USPS Ground, or Priority Flat Rate Boxes.
I will pro..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
These are modern reproductions. They are not real artifacts.
(Updated March 2024)
This is not a live auction.
Auctions will begin at 3pm (Eastern Time) on Mondays and end Monday night (6 hours later) at 9pm (Eastern Time) the same day.
Try not to bid at the last minute. I may not see your bids, or your bids may not post in time.
I will be using YouTube's time tracker to be fair to everyone, but it's not always accurate.
Bid in the comment section.
I will pre-populate the comment section with comments that include the item numbers and a time stamp where the item appears in the video. Please bid under the appropriate comment.
I will monitor the comments periodically.
If you have a question, email me at [email protected]
I will announce the winner by commenting:
SOLD - Thank You! Please email me your name, address, and preferred method of payment to jackcrafty2@ gmail.com
Please be aware that there is no way for me to send you a PM unless I already have your email.
In your email to me, please include your YouTube name, real name, address, and preferred method of payment.
Shipping is free within the US.
INTERNATIONAL SHIPPING IS NOT FREE.
I will add $10 for light weight package (up to 1lb) and $20 for a heavy package (2lb or more). This is a simplification and a change from previous auctions.
I accept PayPal, Venmo, Cash App, Checks, or Money Orders. I can also send you an electronic invoice from "Jack Crafty Studios" to your email address that you can pay with a card.
I will issue refunds if needed. You don't need to ship the item(s) back.
If, for some reason, you can not pay, I will offer the item in the next auction.
I will sign all items (that are in a finished state) unless you don't want me to. Please let me know. My signature looks like this:
Jack
Crafty
PAB
(Year)
Shipping will be on Wednesday after the auction. All shipping will be done through the US Post office using First Class, USPS Ground, or Priority Flat Rate Boxes.
I will pro..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
These are modern reproductions. They are not real artifacts.
(Updated March 2024)
This is not a live auction.
Auctions will begin at 3pm (Eastern Time) on Mondays and end Monday night (6 hours later) at 9pm (Eastern Time) the same day.
Try not to bid at the last minute. I may not see your bids, or your bids may not post in time.
I will be using YouTube's time tracker to be fair to everyone, but it's not always accurate.
Bid in the comment section.
I will pre-populate the comment section with comments that include the item numbers and a time stamp where the item appears in the video. Please bid under the appropriate comment.
I will monitor the comments periodically.
If you have a question, email me at [email protected]
I will announce the winner by commenting:
SOLD - Thank You! Please email me your name, address, and preferred method of payment to jackcrafty2@ gmail.com
Please be aware that there is no way for me to send you a PM unless I already have your email.
In your email to me, please include your YouTube name, real name, address, and preferred method of payment.
Shipping is free within the US.
INTERNATIONAL SHIPPING IS NOT FREE.
I will add $10 for light weight package (up to 1lb) and $20 for a heavy package (2lb or more). This is a simplification and a change from previous auctions.
I accept PayPal, Venmo, Cash App, Checks, or Money Orders. I can also send you an electronic invoice from "Jack Crafty Studios" to your email address that you can pay with a card.
I will issue refunds if needed. You don't need to ship the item(s) back.
If, for some reason, you can not pay, I will offer the item in the next auction.
I will sign all items (that are in a finished state) unless you don't want me to. Please let me know. My signature looks like this:
Jack
Crafty
PAB
(Year)
Shipping will be on Wednesday after the auction. All shipping will be done through the US Post office using First Class, USPS Ground, or Priority Flat Rate Boxes.
I will pro..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
These are modern reproductions. They are not real artifacts.
(Updated March 2024)
This is not a live auction.
Auctions will begin at 3pm (Eastern Time) on Mondays and end Monday night (6 hours later) at 9pm (Eastern Time) the same day.
Try not to bid at the last minute. I may not see your bids, or your bids may not post in time.
I will be using YouTube's time tracker to be fair to everyone, but it's not always accurate.
Bid in the comment section.
I will pre-populate the comment section with comments that include the item numbers and a time stamp where the item appears in the video. Please bid under the appropriate comment.
I will monitor the comments periodically.
If you have a question, email me at [email protected]
I will announce the winner by commenting:
SOLD - Thank You! Please email me your name, address, and preferred method of payment to jackcrafty2@ gmail.com
Please be aware that there is no way for me to send you a PM unless I already have your email.
In your email to me, please include your YouTube name, real name, address, and preferred method of payment.
Shipping is free within the US.
INTERNATIONAL SHIPPING IS NOT FREE.
I will add $10 for light weight package (up to 1lb) and $20 for a heavy package (2lb or more). This is a simplification and a change from previous auctions.
I accept PayPal, Venmo, Cash App, Checks, or Money Orders. I can also send you an electronic invoice from "Jack Crafty Studios" to your email address that you can pay with a card.
I will issue refunds if needed. You don't need to ship the item(s) back.
If, for some reason, you can not pay, I will offer the item in the next auction.
I will sign all items (that are in a finished state) unless you don't want me to. Please let me know. My signature looks like this:
Jack
Crafty
PAB
(Year)
Shipping will be on Wednesday after the auction. All shipping will be done through the US Post office using First Class, USPS Ground, or Priority Flat Rate Boxes.
I will pro..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
#3 Here's how you're losing too much energy:
You're Not Abrading Properly
You're Not Hitting Hard Enough
You're Using Tools That Absorb Energy
You're Not Maintaining Tool Tips Properly
You're Tool Tip Is Weak
You're Not Using The Correct Angles
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
These are modern reproductions. They are not real artifacts.
(Updated March 2024)
This is not a live auction.
Auctions will begin at 3pm (Eastern Time) on Mondays and end Monday night (6 hours later) at 9pm (Eastern Time) the same day.
Try not to bid at the last minute. I may not see your bids, or your bids may not post in time.
I will be using YouTube's time tracker to be fair to everyone, but it's not always accurate.
Bid in the comment section.
I will pre-populate the comment section with comments that include the item numbers and a time stamp where the item appears in the video. Please bid under the appropriate comment.
I will monitor the comments periodically.
If you have a question, email me at [email protected]
I will announce the winner by commenting:
SOLD - Thank You! Please email me your name, address, and preferred method of payment to jackcrafty2@ gmail.com
Please be aware that there is no way for me to send you a PM unless I already have your email.
In your email to me, please include your YouTube name, real name, address, and preferred method of payment.
Shipping is free within the US.
INTERNATIONAL SHIPPING IS NOT FREE.
I will add $10 for light weight package (up to 1lb) and $20 for a heavy package (2lb or more). This is a simplification and a change from previous auctions.
I accept PayPal, Venmo, Cash App, Checks, or Money Orders. I can also send you an electronic invoice from "Jack Crafty Studios" to your email address that you can pay with a card.
I will issue refunds if needed. You don't need to ship the item(s) back.
If, for some reason, you can not pay, I will offer the item in the next auction.
I will sign all items (that are in a finished state) unless you don't want me to. Please let me know. My signature looks like this:
Jack
Crafty
PAB
(Year)
Shipping will be on Wednesday after the auction. All shipping will be done through the US Post office using First Class, USPS Ground, or Priority Flat Rate Boxes.
I will pro..
Flintknapping. Knapping rocks. Making stone tools. Arrowhead. Lithic reduction.
Explaining Platforms and Angles with Words
Part 1
https://youtu.be/TgLoIOms9KI
Part 2
https://youtu.be/aMfpypUVik0
Part 3
https://youtu.be/D1D-NWXWKuU
Fog Knapping With Hopper
https://youtube.com/@historicflintknappingvideo724?si=WbRm4KVADQ81nQra
Aluminum sizes and source
https://www.ebay.com/itm/333413861610
https://www.ebay.com/itm/333393532365
Large Rectangular Abrader:
https://flintknappingsupplies.com/products/coarse-abrading-stone-6x2x1-20grit-3-pack?pr_prod_strat=use_description&pr_rec_id=db0338179&pr_rec_pid=6686631395522&pr_ref_pid=6234089816258&pr_seq=uniform
I have two other channels and a Patreon Account
Allergic Hobbit: https://www.youtube.com/channel/UC1j7ZZ7ZR8j2NeyxXLWn8kg/videos
PAB Philosophy: https://www.youtube.com/channel/UCXDbuH2wbTFHMjm6jdcTZpA/videos
Patreon:
https://www.patreon.com/jackcrafty?fan_landing=true
Front View of My Knapping Style:
https://www.youtube.com/watch?v=vRTkGWOpoJ8
Abo Technique (Natural Materials Only) My Horizontal Punch Style of Knapping:
https://www.youtube.com/watch?v=VPL8f18Eb5o
Swiping or Scraping with hard Hammer:
https://youtu.be/0CEtnIBf8os
WHAT IS HIGH GRADE STONE?
Anything you can run a 1/2" or more flake with a pressure flaker.
HEAT TREATING:
Heat treat a few FLAKES of everything you got except HIGH GRADE Raw Stone, Obsidian, Dacite, Basalt, Hornstone, Sonora, Fort Payne, or Rhyolite. Start with flakes and spalls less than 1" thick for 200°F for 24 hours to dry it out. Then raise the temp to 275°F and hold for 4 hours. Let cool down for 12 hours. Chip and compare. If no difference, put back I at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 4 hours.
Let cool down for 12 hours. Chip and compare. If no difference, put back in at 200°F for 1/2 hour, then raise to 275 for 1/2 hour, then raise to 325 for 1/2 hour, the raise to 375 for 4 hours.
Repeat with temp going up 50°F unti..
Flintknapping and Primitive Skills.