LindyDesignLab

Building a mini table saw powered by a Dremel flex shaft for cutting thin sheets of carbon fiber, plastic, fiberglass, foam etc. 3D printable housing with adjustable legs was designed to stabilize the rotary tool while providing flexibility to work with different size cutting wheels. Hinged top on the plywood base allows access to a compartment for storing the rotary tool and accessories when not in use.

| Supplies |
3D printable model for flex shaft housing: https://lindydesignlab.com/product/dremel-flex-shaft-table-saw-3d-model/
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
UK: https://amzn.to/2KnxrLD
CA: https://amzn.to/2Z4yHaE
Matte Fiber HTPLA Filament
USA: https://amzn.to/2lh5o66
UK: https://amzn.to/2lm2Nbd
CA: https://amzn.to/2jUSBGi
Diamond Cutting Wheel Set
USA: https://amzn.to/2LXFlvX
CA: https://amzn.to/35gw3mj
UK: https://amzn.to/2LSHEjC
Dremel Rotary Tool
USA: https://amzn.to/2IxD4CZ
UK: https://amzn.to/2EQfr94
CA: https://amzn.to/2KngMYD
Tungsten Carbide Cutting/Shaping Wheel
USA: https://amzn.to/30LfufW
UK: https://amzn.to/3174GsP
CA: https://amzn.to/2Z3sWdo
Rotary Tool Accessory Kit
USA: https://amzn.to/2EyW6cr
UK: https://amzn.to/312TXiW
CA: https://amzn.to/2QGYIdb
Perma-Grit Sanding Block
USA: https://amzn.to/2LUl634
UK: https://amzn.to/2YjrOGv
CA: https://amzn.to/2GTt0WH
Needle File Set
USA: https://amzn.to/2KaxD0m
UK: https://amzn.to/2OHZ3iG
CA: https://amzn.to/2T2B1x9
Scroll Saw
USA: https://amzn.to/2QaZ53c
UK: https://amzn.to/2ZYjpJG
CA: https://amzn.to/2ZYjpJG
Weathered Oak Stain
USA: https://amzn.to/31VooaV
CA: https://amzn.to/2AR3g9R

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

Content also available at https://youtu.be/Wptmw0NRof8

Basic process for creating digital patterns for all sorts of props with Fusion 360. Using a shield style dragon head display an example, I'll show you how to import your reference sketch, export the design, get the right page size and cut the template out of plywood with a scroll saw.

Get the 3D model: https://lindydesignlab.com/product/dragon-secret-compartment-box/

Part 1 - Designing the Dragon: https://youtu.be/EtlIKFO5qpU
Part 2 - Joining and Smoothing the Dragon: https://youtu.be/Fh8VO_fv3Hk

| Supplies |
Scroll Saw
USA: https://amzn.to/2QaZ53c
UK: https://amzn.to/2ZYjpJG
CA: https://amzn.to/2ZYjpJG
Blades for Scroll Saw
USA: https://amzn.to/2QkPHKy
UK: https://amzn.to/31prJyu
CA: https://amzn.to/301E7Z5
Perma-Grit Sanding Block
USA: https://amzn.to/2LUl634
UK: https://amzn.to/2YjrOGv
CA: https://amzn.to/2GTt0WH
Tungsten Carbide Cutting/Shaping Wheel
USA: https://amzn.to/30LfufW
UK: https://amzn.to/3174GsP
CA: https://amzn.to/2Z3sWdo
Perma-Grit Shaping Tools
USA: https://amzn.to/2ON8dqg
UK: https://amzn.to/31hSxkS
Face Shield
USA: https://amzn.to/2Xz8v7v
UK: https://amzn.to/2JYiQHk
CA: https://amzn.to/2WiIOHm
Diamond Burr Bits
USA: https://amzn.to/2K8KUGE
UK: https://amzn.to/2SXZS5p
CA: https://amzn.to/317k4EC
Needle File Set
USA: https://amzn.to/2KaxD0m
UK: https://amzn.to/2OHZ3iG
CA: https://amzn.to/2T2B1x9
Rotary Tool Accessory Kit
USA: https://amzn.to/2EyW6cr
UK: https://amzn.to/312TXiW
CA: https://amzn.to/2QGYIdb
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
UK: https://amzn.to/2KnxrLD
Dremel Rotary Tool
USA: https://amzn.to/2IxD4CZ
UK: https://amzn.to/2EQfr94
CA: https://amzn.to/2KngMYD
3M Respirator Half Mask
USA: https://amzn.to/2IjbzhZ
UK: https://amzn.to/2JUXn1V
CA: https://amzn.to/2InRUO6

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

Content also available on YouTube: https://youtu.be/uaP8B5OqYE0

This is a dependable method for bonding parts of a large model and removing print lines. Using a dragon as an example, I'll show you how to plastic weld the parts together with a wood burning tool, coat the parts in tinted epoxy resin then sand to remove remaining imperfections.

Get the 3D model: https://lindydesignlab.com/product/dragon-secret-compartment-box/

Part 1 - Designing the Dragon: https://youtu.be/EtlIKFO5qpU

| Supplies |
Wood Burner
http://amzn.to/2mjbaCy
Brush-On Super Glue
https://amzn.to/324d9fX
Best Sandpaper (3M Pro Grade Precision)
https://amzn.to/2WqRHON
Needle File Set
https://amzn.to/2KaxD0m
Diamond Burr Bits
USA: https://amzn.to/2K8KUGE
UK: https://amzn.to/2SXZS5p
CA: https://amzn.to/317k4EC
Perma-Grit Sanding Block
https://amzn.to/2LUl634
Small Clamps
https://amzn.to/2ZvgD9K
Black Epoxy Dye
USA: https://amzn.to/2HpArF3
Table Top Epoxy 2 Quart Kit
USA: https://amzn.to/2K30N2C
CA: https://amzn.to/2WoiFXs
Table Top Epoxy Gallon Kit
https://amzn.to/2EYoYeF
XTC-3D Coating 24 oz. Kit
https://amzn.to/2WuzsNn
Extension Spring (0.028"x0.437"x1.5")
https://amzn.to/2ZhPJGO
#4 Washers
https://amzn.to/2Hr2ILD
Bearings 5x11x4mm
https://amzn.to/2U48APY
#4-40 Machine Screws
https://amzn.to/2zn1zjy
Gel Pens with Compression Springs
https://amzn.to/2ZouIWf
Rotary Tool Accessory Kit
https://amzn.to/2EyW6cr
Dremel Flex Shaft
https://amzn.to/2ElU5O5
Dremel Rotary Tool
https://amzn.to/2IxD4CZ
Matte Fiber HTPLA Filament
https://amzn.to/2lh5o66
AmazonBasics PETG Filament
https://amzn.to/2jSM3Id
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
Ultimaker 2+ Extended 3D Printer
http://amzn.to/2l4Y0Xb

| Equipment Used |
Canon Powershot G7X
http://amzn.to/2oqPTEu
Zoom H1 Recorder
http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic
http://amzn.to/2oTtbZy
Lighting Kit
https://amzn.to/2DfaMiG

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

Content also available at https://youtu.be/Fh8VO_fv3Hk

Building a lightweight corrugated plastic box with XPS foam insert to protect a large sword blade prop. Also using 3d modeled and printed end caps for the handle tube to match the design of the prop. The finished containers help to protect the parts during shipping and provide the customer with a safe way to store and transport the spear-sword while traveling to events.

Making the Ashandarei Spear-Sword Prop
https://www.youtube.com/watch?v=Kj9Ic0WBNjQ&list=PL1-N4Av1H6xNnq4NCym8-Z4vUXpUDuWFI

| Supplies |
Corrugated Plastic Sheet
USA: https://amzn.to/2z51Oje
UK: https://amzn.to/2KUD0zU
CA: https://amzn.to/2YWH0K0
EPS (Expanded) Foam
USA: https://amzn.to/31SbyK9
UK: https://amzn.to/2Nanvqt
CA: https://amzn.to/2Z9DHup
XPS (Extruded) Foam
USA: https://amzn.to/2YZHwqL
UK: https://amzn.to/2MqG3mG
Blade Sharpener
USA: https://amzn.to/31Lb7kD
CA: https://amzn.to/33InT5i
Ultimaker 2+ Extended 3D Printer
USA: http://amzn.to/2l4Y0Xb
UK: https://amzn.to/2MqBz0b
CA: https://amzn.to/2Ig1PVG
Polypropylene Webbing
USA: https://amzn.to/2ZbtSfp
UK: https://amzn.to/31TbtWB
CA: https://amzn.to/31NdUtx
Velcro Wrap
USA: https://amzn.to/2Zf6vS4
UK: https://amzn.to/2YY88Z6
CA: https://amzn.to/2KRWB3T
Sewing Machine
USA: https://amzn.to/2HdP9yY
UK: https://amzn.to/31I7FXY
CA: https://amzn.to/2Hswj7x

| Equipment Used |
Canon Powershot G7X
USA: http://amzn.to/2oqPTEu
UK: https://amzn.to/2WCfuQf
CA: https://amzn.to/2WlHc4d
Zoom H1 Recorder
USA: http://amzn.to/2oLSvyQ
UK: https://amzn.to/317y2as
CA: https://amzn.to/2KlfSMt
Giant Squid Audio Lab Mic
USA: http://amzn.to/2oTtbZy
CA: https://amzn.to/2JRTPNO
Lighting Kit
USA: https://amzn.to/2DfaMiG
UK: https://amzn.to/2QPiyDi
CA: https://amzn.to/2IiFcjy

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available on YouTube https://youtu.be/YiJz_iBWotc.

Creating all the parts of a Japanese Tanto using modern materials. First the blade is ground from a thick sheet of silver wave carbon fiber. Grip and scabbard are 3D printed from gray matte filament and polished smooth. Each piece is precisely hand fitted and held in place with a carbon fiber peg.

| Supplies |
Tungsten Carbide Cutting/Shaping Wheel
https://amzn.to/30LfufW

Diamond Burr Bits
https://amzn.to/2K8KUGE

Matte Fiber HTPLA Filament
https://amzn.to/2lh5o66

Rotary Tool Accessory Kit
https://amzn.to/2EyW6cr

Dremel Flex Shaft
https://amzn.to/2ElU5O5

Dremel Rotary Tool
https://amzn.to/2IxD4CZ

Needle File Set
https://amzn.to/2KaxD0m

Perma-Grit Sanding Block
https://amzn.to/2LUl634

Perma-Grit Shaping Tools
https://amzn.to/2ON8dqg

DeWALT Palm Sander
USA: https://amzn.to/2IoW87R

Best Sandpaper (3M Pro Grade Precision)
https://amzn.to/2WqRHON

Work Gloves
https://amzn.to/2Ov0Ozt

Plastic Polish (Meguiars PlastX)
https://amzn.to/2MCKAl4

Polishing Pads w/Drill Adapter
https://amzn.to/2LTPcE0

DeWALT Drill
https://amzn.to/2ysvl63

3D Printer (Ultimaker 2+ Extended)
http://amzn.to/2l4Y0Xb

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

This dragon will keep small items secret and safe. Find and pull the correct scale to dramatically reveal the contents as the lower jaw gapes wide. As part 1 in the series, this video covers the design process, the three basic methods used in Fusion 360 to sculpt the face and construct the mechanism and post-print revisions using the history feature.

| Supplies |
Matte Fiber HTPLA Filament
USA: https://amzn.to/2lh5o66
UK: https://amzn.to/2lm2Nbd
CA: https://amzn.to/2jUSBGi
AmazonBasics PETG Filament
USA: https://amzn.to/2jSM3Id
UK: https://amzn.to/2jQWwEc
CA: https://amzn.to/2lm0yEJ
Ultimaker 2+ Extended 3D Printer
USA: http://amzn.to/2l4Y0Xb
UK: https://amzn.to/2MqBz0b
CA: https://amzn.to/2Ig1PVG
Rotary Tool Accessory Kit
USA: https://amzn.to/2EyW6cr
UK: https://amzn.to/312TXiW
CA: https://amzn.to/2QGYIdb
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
UK: https://amzn.to/2KnxrLD
CA: https://amzn.to/2Z4yHaE
Dremel Rotary Tool
USA: https://amzn.to/2IxD4CZ
UK: https://amzn.to/2EQfr94
CA: https://amzn.to/2KngMYD
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/

| Equipment Used |
Canon Powershot G7X
USA: http://amzn.to/2oqPTEu
UK: https://amzn.to/2WCfuQf
CA: https://amzn.to/2WlHc4d
Zoom H1 Recorder
USA: http://amzn.to/2oLSvyQ
UK: https://amzn.to/317y2as
CA: https://amzn.to/2KlfSMt
Giant Squid Audio Lab Mic
USA: http://amzn.to/2oTtbZy
CA: https://amzn.to/2JRTPNO
Lighting Kit
USA: https://amzn.to/2DfaMiG
UK: https://amzn.to/2QPiyDi
CA: https://amzn.to/2IiFcjy

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://youtu.be/EtlIKFO5qpU

Will table top resin work for filling in print lines and strengthening joints on a 3d printed prop? Instead of pouring a table finish with this clear epoxy resin, I brushed two layers over a complex 3d printed trident to see what kind of results I could get with minimal effort.

Trident by CP3D Printing - Custom 3D Printed Cosplay Weapons and Props
https://www.etsy.com/shop/CP3DPrinting

| Supplies |
Table Top Epoxy 2 Quart Kit
USA: https://amzn.to/2K30N2C
CA: https://amzn.to/2WoiFXs
Table Top Epoxy Gallon Kit
USA: https://amzn.to/2EYoYeF
CA: https://amzn.to/2WuT9Vt
XTC-3D Coating 24 oz. Kit
USA: https://amzn.to/2WuzsNn
UK: https://amzn.to/2K4WUtY
CA: https://amzn.to/2WjQYyV
Embossing Heat Gun
USA: https://amzn.to/2EQ7C3e
DeWALT Palm Sander
USA: https://amzn.to/2IoW87R
UK: https://amzn.to/2KEqshP
CA: https://amzn.to/2Mve4mx
Best Sandpaper
USA: https://amzn.to/2WqRHON
UK: https://amzn.to/2WvNQoL
CA: https://amzn.to/2yvz7f3
Tack Cloth
USA: https://amzn.to/2It9y2F
UK: https://amzn.to/2KApao2
CA: https://amzn.to/2EXcgg2
Cheap but Useful Rotary Tool Accessory Kit
USA: https://amzn.to/2EyW6cr
UK: https://amzn.to/312TXiW
CA: https://amzn.to/2QGYIdb
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
UK: https://amzn.to/2KnxrLD
CA: https://amzn.to/2Z4yHaE
Dremel Rotary Tool
USA: https://amzn.to/2IxD4CZ
UK: https://amzn.to/2EQfr94
CA: https://amzn.to/2KngMYD
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
Ultimaker 2+ Extended 3D Printer
USA: http://amzn.to/2l4Y0Xb
UK: https://amzn.to/2MqBz0b
CA: https://amzn.to/2Ig1PVG

| Equipment Used |
Canon Powershot G7X
USA: http://amzn.to/2oqPTEu
Zoom H1 Recorder
USA: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic
USA: http://amzn.to/2oTtbZy
Lighting Kit
USA: https://amzn.to/2DfaMiG

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

Content also available at https://youtu.be/TyhGxJr_A0Y

Here's how to cast carbon fiber rocks using silicone molds taken from natural rocks. The process uses small sections of a variety of carbon fiber fabric types to create an interesting pattern that captures the small details in the molds.

Part 1- Making the Rock Molds: https://www.youtube.com/watch?v=U2-GXDpqEPo

| Supplies |
Precise Resin Scale\https://amzn.to/2YLNF5h
UK: https://amzn.to/2KtFd73
Tungsten Carbide Cutting/Shaping Wheel
USA: https://amzn.to/30LfufW
UK: https://amzn.to/3174GsP
CA: https://amzn.to/2Z3sWdo
Cheap but Useful Rotary Tool Accessory Kit
USA: https://amzn.to/2EyW6cr
UK: https://amzn.to/312TXiW
CA: https://amzn.to/2QGYIdb
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
UK: https://amzn.to/2KnxrLD
CA: https://amzn.to/2Z4yHaE
Dremel Rotary Tool
USA: https://amzn.to/2IxD4CZ
UK: https://amzn.to/2EQfr94
CA: https://amzn.to/2KngMYD
Resin and vac bagging systems: http://acpcomposites.com/
PVA Mold Release
USA: https://amzn.to/2W3E38f
UK: https://amzn.to/2Z4tXBS
CA: https://amzn.to/2KpIbcK
Vacuum Chamber
USA: https://amzn.to/2VzcsfT
UK: https://amzn.to/2Ko3Jq8
CA: https://amzn.to/2KnfZa7
Vacuum Pump
USA: https://amzn.to/2LKESPm
UK: https://amzn.to/2KoR1ak
CA: https://amzn.to/2QDGyZK
Brushable Silicone: https://www.smooth-on.com/product-line/ez-brush/

| Equipment Used |
Canon Powershot G7X
USA: http://amzn.to/2oqPTEu
UK: https://amzn.to/2WCfuQf
CA: https://amzn.to/2WlHc4d
Zoom H1 Recorder
USA: http://amzn.to/2oLSvyQ
UK: https://amzn.to/317y2as
CA: https://amzn.to/2KlfSMt
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG

The above links may include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://youtu.be/Y5jz1sJzX-E

Testing out a vacuum chamber to remove air bubbles from silicone and resin while making a jacket mold using silicone to capture the surface detail and a rigid fiberglass shell in two parts to release the molded object which has undercuts.

| Supplies |
Vacuum Chamber: https://amzn.to/2VzcsfT
Vacuum Pump: https://amzn.to/2LKESPm
PVA Release: https://amzn.to/2W3E38f
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
Brushable Silicone: https://www.smooth-on.com/product-line/ez-brush/
EZ Lam Resin: https://store.acpsales.com/products/11597/ez-lam-60-minute-epoxy-resin

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

The above links are Amazon affiliate links. Lindy Design Lab receives a small commission when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://www.youtube.com/watch?v=U2-GXDpqEPo&t=2s

The goal was to create a mold from a car mirror cover and cast a thin part to be used as a removable skin. The part created had some small flaws that turned into a big mess.

| Supplies |
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
Face Shield: https://amzn.to/2Xz8v7v
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

Carbon Fiber and Resin Suppliers I use: ACP Composites, Composite Envisions, Easy Composites

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

The above links are Amazon affiliate links. Lindy Design Lab receives a small commission when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://www.youtube.com/lindydesignlab

Music Credits
5:54 AM (Dawn) by Ross Bugden - Music. This track is licensed under a ‘Creative Commons Attribution 4.0 International License’. Source: https://youtu.be/ZKYP5HOjng0

The final step for the carbon fiber sword is to even out the finish with epoxy, sanding and lacquer. To display the finished piece I designed and 3d printed a mounting bracket.

Sword of Perseus and Other Custom 3d Printed Props by CP 3D Printing: https://www.etsy.com/shop/CP3DPrinting?ref=l2-shopheader-name

Making the mold: https://youtu.be/aoSyRCgXHSg
Casting the parts: https://youtu.be/--5WYf9l9lk

| Supplies |
Krylon Lacquer: https://amzn.to/2IcTSSE
Permagrit Shaping Tools: https://amzn.to/2ON8dqg
Polishing Compound: https://amzn.to/2R314lz
Mold Release Wax: https://amzn.to/2CXnlya
PVA Release: https://amzn.to/2CVOykS
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

The above links are Amazon affiliate links. Lindy Design Lab receives a small commission when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://www.youtube.com/lindydesignlab

Making real carbon fiber parts for the Sword of Perseus using the fiberglass molds created previously. Layers of carbon fiber cloth are layered into the molds and coated with epoxy resin then cured in a vacuum bag. The three separate parts must be trimmed and joined to form the completed sword ready for finishing.

Sword of Perseus and Other Custom 3d Printed Props by CP 3D Printing: https://www.etsy.com/shop/CP3DPrinting?ref=l2-shopheader-name

Making the Mold: https://youtu.be/aoSyRCgXHSg

| Supplies |
Rotary Cutting Set: https://amzn.to/2uau81m
JB Weld for Joining Parts: https://amzn.to/2ClHIDx
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

The above links are Amazon affiliate links. Lindy Design Lab receives a small commission when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://www.youtube.com/lindydesignlab

Music Credits
Olympus by Ross Bugden - Music. This track is licensed under a ‘Creative Commons Attribution 4.0 International License’. Source: https://youtu.be/BnmglWHoVrk

What's the best way to prevent carbon fiber fabric from unraveling and becoming deformed? Add a stabilizer to hold the weave in place during cutting and lamination. In this video we're testing Pro Finish and Web-Lock from Composite Envisions and comparing this to carbon fiber fabric treated with spray adhesive.

| Supplies |
Pro Finish Carbon Fiber: https://compositeenvisions.com/pro-finish-carbon-fiber-fabric-2x2-twill-3k-47-25-120cm-7-2oz-245gsm-high-density/
Web-Lock Carbon Fiber: https://compositeenvisions.com/carbon-fiber-fabric-2x2-twill-3k-50-127cm-6oz-203-43gsm-toray-t-300-with-web-lock-stabilization/
Vacuum Degassing Chamber: https://amzn.to/2U6nkNw

| Video Production Equipment |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

The above links are Amazon affiliate links. Lindy Design Lab receives a small commission when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://www.bitchute.com/channel/NsbktnKxtLpq/

Creating a mold from a 3d printed sword prop so it can later be cast in carbon fiber. Parts must be assembled and prepped before layering fiberglass and epoxy resin to create the mold. Once cured, the original parts are removed from the molds.

Sword of Perseus and Other Custom 3d Printed Props by CP 3D Printing: https://www.etsy.com/shop/CP3DPrinting?ref=l2-shopheader-name

| Supplies |
Gorilla Glue: https://amzn.to/2CXaqMT
Filler Primer Red: https://amzn.to/2I2Ekm1
Gray Primer: https://amzn.to/2Bp4uJV
Mold Release Wax: https://amzn.to/2CXnlya
PVA Release Film: https://amzn.to/2CVOykS
Resin Scale: https://amzn.to/2CXD7Jt
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

The above links are Amazon affiliate links. Lindy Design Lab receives a small commission when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://youtu.be/aoSyRCgXHSg

Music Credits
Olympus by Ross Bugden - Music. This track is licensed under a ‘Creative Commons Attribution 4.0 International License’. Source: https://youtu.be/BnmglWHoVrk

Transforming a broken surfboard into an Elven shield inspired by the Lord of the Rings film prop. The form has been shaped and reinforced with carbon fiber and fiberglass. I've added a pvc handle with 3d printed brackets and several layers of earth tone and translucent metallic paints to complete the design.

| Supplies |
Green Spray Paint: https://amzn.to/2AWsc03
Antique Copper Acrylic: https://amzn.to/2AVnoYI
Pure Gold Acrylic: https://amzn.to/2T8ermc
Acrylic Sealer: https://amzn.to/2JqU4N0
Oil Paints: https://amzn.to/2Sx8waq
Gorilla Glue: https://amzn.to/2JpsNu4
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

The above links are Amazon affiliate links. Lindy Design Lab receives a small commission when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://youtu.be/WJU9X2GMPMA

Music Credits
Olympus by Ross Bugden - Music. This track is licensed under a ‘Creative Commons Attribution 4.0 International License’. Source: https://youtu.be/BnmglWHoVrk
Flight Hymn by Ross Bugden - Music. This track is licensed under a ‘Creative Commons Attribution 4.0 International License’. Source: https://youtu.be/XCr0bsng60Y

Using a simple mold to shape carbon fiber into holiday ornaments. The layers are pressed into the mold by a vacuum bag during cure, flashing trimmed and the halves joined to create a finished design that catches the light from every side.

| Supplies |
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK
Auto-Vac Pump: https://store.acpsales.com/products/2303/auto-vac-system

| Equipment Used |
Small Scale for Resin: https://amzn.to/2EkgaRn
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

The above links are Amazon affiliate links. Lindy Design Lab receives a small commission when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://youtu.be/rvjI5dHnS3c

As part of an ongoing quest for the perfect ergonomic computer setup, I'm testing a slim profile vertical mouse gripped using only your finger tips. The design is unique and comfortable, but what are the drawbacks, and is there a better option?

Kinesis DXT Ergonomic Vertical Mouse:
Wireless - https://amzn.to/2SStu2P
Wired - https://amzn.to/2ElC5H6

My favorite mouse of all time:
Kensington Slimblade Trackball - https://amzn.to/2QQMlxO

3D Connexion SpaceMouse (Excellent finger strain relieving accessory for 3D navigation)
Compact (wired): https://amzn.to/2Qiswz5
Compact (wireless): https://amzn.to/2TBZVU9
Pro (wireless): https://amzn.to/2P04wfw
Enterprise: https://amzn.to/2r1IMWU

| Supplies |
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

Thanks for using my Amazon affiliate links! This helps to support the channel at no additional cost to you.

I post new videos every other Saturday, so don't forget to subscribe and click the bell for notifications! https://www.youtube.com/lindydesignlab?sub_confirmation=1

More at http://lindydesignlab.com/

Content also available at https://www.youtube.com/lindydesignlab

Music Credits
Music Provided by MU - Music Unleashed: https://goo.gl/jj2d3u Track: Retro Weekend - [MU release] Track link: https://youtu.be/WZXXNWjhXNE

The High Elven Shield recycled surfboard makeover continues with layers of reinforcing fabric and resin to make it rigid and strong. To preserve the detail and shape, the entire shield and surfboard are left to cure in a vacuum bag after each layer. There's a problem though... looks like I'll be doing more sanding than expected.

Watch part 1 and the mini shield test videos: https://www.youtube.com/playlist?list=PL1-N4Av1H6xO_oqMpAntXAPBeXNb9d-zl

| Supplies |
EZ-Lam Epoxy Resin: https://store.acpsales.com/products/11597/ez-lam-60-minute-epoxy-resin
Auto-Vac Pump: https://store.acpsales.com/products/2303/auto-vac-system
Spray Adhesive: https://amzn.to/2Us7i0R
Small Scale for Resin: https://amzn.to/2EkgaRn
Foam Brush: https://amzn.to/2QjW4x3
Red Primer: https://amzn.to/2LcG8qR
Filler Primer: https://amzn.to/2yGRbTT
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

Thanks for using my Amazon affiliate links! This helps to support the channel at no additional cost to you.

I post new videos every other Saturday, so don't forget to subscribe and click the bell for notifications! https://www.youtube.com/lindydesignlab?sub_confirmation=1

More at http://lindydesignlab.com/

Content also available at https://www.bitchute.com/channel/NsbktnKxtLpq/

Music Credits
Echoes of Time by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300029
Artist: http://incompetech.com/

#LordOfTheRingsProps

Using scraps of surfboard and craft foam, I made a miniature shield mock-up to test the concept of laminating the High Elven Shield with fiberglass to reinforce and set the shape. I'll be testing EZ-Lam 60 min. epoxy by ACP Composites to see how it performs and testing a painted gold "metal" finish technique.

| Supplies |
EZ-Lam Epoxy Resin: https://store.acpsales.com/products/11597/ez-lam-60-minute-epoxy-resin
Auto-Vac Pump: https://store.acpsales.com/products/2303/auto-vac-system
Filler Primer: https://amzn.to/2yGRbTT
Light Silver Acrylic: http://amzn.to/2Cessqg
Oil Paints: https://amzn.to/2Sx8waq
Cutting Mat: https://amzn.to/2qhMSdh
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

Thanks for using my Amazon affiliate links! This helps to support the channel at no additional cost to you.

I post new videos about every other weekend. If you enjoy cool prop builds, experiments with composite materials and design related product reviews, then you you will enjoy the channel. Subscribe and click the bell for notifications to keep up to date. https://www.youtube.com/lindydesignlab?sub_confirmation=1

More at http://lindydesignlab.com/

Content also available at https://www.youtube.com/lindydesignlab

Music Credits
Echoes of Time by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300029
Artist: http://incompetech.com/

Hours spent at the computer 3D modeling can be a literal pain. I'm testing out a variety of mice to see if any of them can alleviate that discomfort. I'll try two handheld trackball mice, a vertical mouse and, most novel of all, the SpaceMouse! These are products I purchased, not provided free or sponsored. I have included Amazon affiliate links below if you are interested trying any of these yourself.

Mini Handheld Trackball Mouse (wired): https://amzn.to/2PViULu

Handheld Trackball Mouse with Scroll Wheel (wireless): https://amzn.to/2DEq6US

J-Tech Digital Vertical Mouse (right hand): https://amzn.to/2BtbLJq

3D Connexion SpaceMouse
Compact (wired): https://amzn.to/2Qiswz5
Compact (wireless): https://amzn.to/2TBZVU9
Pro (wireless): https://amzn.to/2P04wfw
Enterprise: https://amzn.to/2r1IMWU

Mouse Pad with Wrist Support: https://amzn.to/2TAKI5Q

| Supplies |
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

Thanks for using my Amazon affiliate links. This helps to support the channel at no additional cost to you.

I post new videos every other Saturday, so don't forget to subscribe and click the bell for notifications! https://www.youtube.com/lindydesignlab?sub_confirmation=1

More at http://lindydesignlab.com/

Content also available at https://youtu.be/97f5QoRihGE

Music Credits
Olympus by Ross Bugden - Music. This track is licensed under a ‘Creative Commons Attribution 4.0 International License’. Source: https://youtu.be/BnmglWHoVrk

I saved a damaged surfboard from becoming landfill. Now I need to turn it into something cool to justify the space it consumes. It's just the right size for a Lord of the Rings High Elven Shield replica, so I'll be cutting the shape, making a template for the ornate details and attaching the pieces together in preparation for a layer of fiberglass.

Thanks to Academy Cosplay for providing the Foam Clay sample! I'll be conducting further tests in a future video. Shop: https://academycosplay.com/shop/

| Supplies |
2mm Foam Roll: https://amzn.to/2DLkEQW
3M Face Shield: https://amzn.to/2qRjpXP
Utility Knife: http://amzn.to/1MyRZqp
Knife Sharpener: http://amzn.to/1YBxBkK
3D Pen: https://amzn.to/2S2yMIj
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

Thanks for using my Amazon affiliate links! This helps to support the channel at no additional cost to you.

I post new videos every other Saturday, so don't forget to subscribe and click the bell for notifications! https://www.youtube.com/lindydesignlab?sub_confirmation=1

More at http://lindydesignlab.com/

Content also available at https://youtu.be/xogUf1AzCGY

Music Credits
Echoes of Time by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300029
Artist: http://incompetech.com/
Fluidscape by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100393
Artist: http://incompetech.com/
CGI Snake by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://chriszabriskie.com/divider/
Artist: http://chriszabriskie.com/
Echoes of Time by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300029
Artist: http://incompetech.com/
Flight Hymn by Ross Bugden - Music. This track is licensed under a ‘Creative Commons Attribution 4.0 International License’. Source: https://youtu.be/XCr0bsng60Y

Putting together and painting some massive 3d printed knives. The design is inspired by Drax the Destroyer's blades in Guardians of the Galaxy but painted to look like the handles are carved from wood. Big thanks to CP 3D Printing for sending this kit to try out!

Custom 3D Printed Weapons and Props by CP 3D Printing: https://www.etsy.com/shop/CP3DPrinting

Drax's Daggers Kit: https://www.etsy.com/listing/602569376/guardians-of-the-galaxy-drax-the?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=drax%20blades&ref=sr_gallery-1-1&organic_search_click=1

| Supplies |
Gorilla Glue: https://amzn.to/2JpsNu4
Filler Primer: https://amzn.to/2yGRbTT
Automobile Primer: https://amzn.to/2Dd48ZK
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
Light Silver Acrylic: http://amzn.to/2Cessqg
Gunmetal Dark Silver Acrylic: http://amzn.to/2C3QH9U
Acrylic Sealer: https://amzn.to/2JqU4N0
Oil Paints: https://amzn.to/2Sx8waq
Cutting Mat: https://amzn.to/2qhMSdh
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

Thanks for using my Amazon affiliate links! This helps to support the channel at no additional cost to you.

I post new videos every other Saturday, so don't forget to subscribe and click the bell for notifications! https://www.youtube.com/lindydesignlab?sub_confirmation=1

More at http://lindydesignlab.com/

Content also available at https://www.youtube.com/lindydesignlab

Music Credits
Echoes of Time by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300029
Artist: http://incompetech.com/

Riveting together the Doom Wielder Gauntlet template parts, including the steel pieces crafted by David Guyton and the carbon fiber version. Experimenting with using a 3d printed mold, twill weave and spread tow carbon fiber cloth and curing in a vacuum bag to create forearm armor. A big thank you to David at Armor Templates for providing the stunning steel gauntlet that inspired this whole project!

| Supplies |
Scale: https://amzn.to/2CXD7Jt
Gorilla Glue: https://amzn.to/2CXaqMT
Steel Block: https://amzn.to/2O6E3O6
Cutting Mat: https://amzn.to/2SbK6TE
Filler Primer: https://amzn.to/2yqFr87
Polishing Compound: https://amzn.to/2R314lz
Face Shield: https://amzn.to/2ECnVTM
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Mold Release Wax: https://amzn.to/2CXnlya
PVA Release Film: https://amzn.to/2CVOykS
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

Thanks for using my Amazon affiliate links! This helps to support the channel at no additional cost to you.

I post new videos every other weekend so don't forget to subscribe and click the bell for notifications! https://www.youtube.com/lindydesignlab?sub_confirmation=1

More at http://lindydesignlab.com/

Content also available at https://www.youtube.com/lindydesignlab

Wearing individual parts of the Lord of the Rings Nazgul inspired costume works to show them in motion separately, but summer is too hot to wear the whole costume outside. Instead I tried creating a wooden armature to stage the elements for photos and video and then combined footage from the handheld camera and the drone to create a dramatic sequence featuring the Ringwraith.

| Supplies |
Phantom 4 Pro: https://amzn.to/2OFaKSF
Cordless Screw Driver: https://amzn.to/2Rto5PJ
Favorite Sun Hat: https://amzn.to/2C1oZ0K
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG

Thanks for using my Amazon affiliate links. This helps to support the channel at no additional cost to you.

More at http://lindydesignlab.com/

Content also available at https://www.youtube.com/lindydesignlab

Music Credits
Fluidscape by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100393
Artist: http://incompetech.com/
Dark Times by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100747
Artist: http://incompetech.com/

#LordOfTheRingsProps

Designing and constructing a Lord of the Rings Nazgul inspired cloak that that will turn a 6 ft. tall human into an 8 ft. tall Ringwraith. Custom padding and straps secure the empty hood in place above the wearer's concealed head. Stay tuned at the end for a look at the complete Nazgul costume in a setting reminiscent of the Dead Marshes.

| Supplies |
Couch Foam: https://amzn.to/2MIwkE1
Foam Cutter: https://amzn.to/2DoPqzM
SainSmart TPU Clear Filament: https://amzn.to/2MPWq7U
Steel Block: https://amzn.to/2O6E3O6
Rivet Nuts: https://amzn.to/2pntTgT
.028" Kydex: https://amzn.to/2xq0sPA
EVA Foam Floor Mats: https://amzn.to/2xEnUb6
1" Webbing: https://amzn.to/2xEoaXC
Paracord: https://amzn.to/2DgdMLU
Fabric (Wait for Joann to have a 50% off coupon!): https://www.joann.com/sew-classics-cr...
Camouflage Earth Brown Spray Paint: http://amzn.to/2DKXOWC
Camouflage Sand Spray Paint: http://amzn.to/2A0W6yh
Dark Gray Primer: http://amzn.to/2gOc6es
Yellow Ochre Acrylic Paint: https://amzn.to/2DebYmw
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
3D Printer: https://amzn.to/2EnBwsK

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

Thanks for using my Amazon affiliate links! This helps to support the channel at no additional cost to you.

I post new videos every other Saturday, so don't forget to subscribe and click the bell for notifications! https://www.youtube.com/lindydesignla...

More at http://lindydesignlab.com/

Content also available at https://www.youtube.com/lindydesignlab

Music Credits
Echoes of Time by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: http://incompetech.com/music/royalty-...
Artist: http://incompetech.com/
Dark Times by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: http://incompetech.com/music/royalty-...
Artist: http://incompetech.com/

SHOW MORE

Created 1 year, 6 months ago.

44 videos

CategoryDIY & Gardening

Explore modern materials, tools and techniques for making prop weapons and armor.