SBS Extensions

SYSTEM BUILD:
HSK: Noctua NH-C14S
CSE: Corsair Carbide 500R
PSU: Corsair TX-M Series TX650M
MOB: Gigabyte B450 Aorus Elite (Rev. 1.0)
CPU: AMD Ryzen 7 2700X
RAM: Ballistix Sport LT 16GB (8GBx2) DDR4 2666
M.2: Crucial MX500 M.2 2280 500GB SATA III
GPU: PNY Quadro K4000

SECTION 1: CPU COOLER RE-PURPOSE 0:00
Removal of Noctua NH-C14S from an old Intel Sandy Bridge-E Core i7-3820 system.

SECTION 2: OEM CPU COOLER REMOVAL 0:25
Removal of an AMD Wraith Prism Box Cooler.

SECTION 3: CPU CLEAN-UP 1:00
CPU heatspreader clean-up.

SECTION 4: HEATSINK AND FAN INSTALLATION 1:14
Installation of a Noctua NH-C14S heatsink and fan on an AM4 socket.

THANK YOU FOR WATCHING
UPVOTE, COMMENT AND FOLLOW

SOUNDTRACK
'Tenebrous Brothers Carnival' [Action]
by Kevin McLeod
(incompetech.com)

'A Surprising Encounter' [Credits]
by Kevin McLeod
(incompetech.com)

SOUNDTRACK LICENSED UNDER
Creative Commons:
By Attribution 3.0
https://www.youtube.com/redirect?event=video_description&v=AoQu3TA9yW0&q=http%3A%2F%2Fcreativecommons.org%2Flicenses%2Fby%2F3.0%2F&redir_token=MBvhbBZJ4pEk5B7tOeahhbPYwD58MTU2NzczMzY5MkAxNTY3NjQ3Mjky

SYSTEM BUILD:
CSE: Corsair Carbide 500R
PSU: Corsair TX-M Series TX650M
MOB: Gigabyte B450 Aorus Elite (Rev. 1.0)
CPU: AMD Ryzen 7 2700X
RAM: Ballistix Sport LT 16GB (8GBx2) DDR4 2666
M.2: Crucial MX500 M.2 2280 500GB SATA III
GPU: PNY Quadro K4000

SECTION 1: SYSTEM TEAR DOWN 0:00
Old Intel Sandy Bridge-E Core i7-3820 based system being removed.

SECTION 2: POWER SUPPLY INSTALLATION 0:39
Corsair TX-M Series TX650M semi-modular 80+ Gold power supply unboxing and installation.

SECTION 3: MOTHERBOARD PREP 1:15
Setting up Gigabyte B450 Aorus (Rev. 1.0) motherboard, with CPU, M.2 drive, RAM and CPU Heat Sink.

SECTION 4: MOTHERBOARD INSTALLATION 3:40
Installing Gigabyte mobo into Corsair Carbide 500R case.

SECTION 5: POWER SUPPLY CABLE INSTALLATION 4:48
Connecting power cables between PSU and motherboard.

SECTION 6: CASE FRONT PANEL CABLE INSTALLATION 5:17
Connecting front case umbilical (Power Switch, Reset Switch, HDD LED Light, HD Audio and USB 3.0)

SECTION 7: GRAPHICS CARD INSTALLATION 6:02
Installing single slop workstation GPU (PNY QUADRO K400), to motherboard and case.

THANK YOU FOR WATCHING
UPVOTE, COMMENT AND FOLLOW

SOUNDTRACK
'Tenebrous Brothers Carnival' [Action]
by Kevin McLeod
(incompetech.com)

'A Surprising Encounter' [Credits]
by Kevin McLeod
(incompetech.com)

SOUNDTRACK LICENSED UNDER
Creative Commons:
By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/

Noctua NH-C14S CPU (air) cooler is used to upgrade/replace a 6+ year old and noisy Corsair Hydro Series H80 liquid CPU cooler, on a ASUS P9X79 PRO motherboard - Intel socket LGA2011 (Core i7-3820).

THANK YOU FOR WATCHING

RATE, COMMENT AND FOLLOW

SOUNDTRACK
'Twisting' [Action]
by Kevin McLeod
(incompetech.com)

'A Surprising Encounter' [Credits]
by Kevin McLeod
(incompetech.com)

SOUNDTRACK LICENSED UNDER
Creative Commons:
By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/

REFERENCE INFORMATION
Noctua NH-C14S Installation Manual
Noctua NH-C14S Image Gallery
www.noctua.at

Workstation system build for CADD.

SECTION 1: SYSTEM TEAR DOWN - 0:00
SECTION 2: CASE PREP - 2:28
SECTION 3: MOTHERBOARD PREP - 4:26
SECTION 4: MOTHERBOARD INSTALLATION - 9:41
SECTION 5: POWER SUPPLY CABLE INSTALLATION - 10:31
SECTION 6: CASE FRONT PANEL CABLE INSTALLATION - 11:20
SECTION 7: GRAPHICS CARD INSTALLATION - 12:22

SYSTEM BUILD:
CASE: ANTEC P280
PSU: ANTEC HCP PLATINUM HCP-1000
CPU: AMD Ryzen Threadripper 1900X
GPU: AMD Radeon Pro WX 7100
MOBO: Gigabyte X399 Designare EX (Rev. 1.0)
RAM: Kingston Value RAM 32GB ECC (4x8GB)
NVMe: Samsung 960 Pro 1TB
HSink: Noctua NH-U14S TR4-SP3

(CF3-AP280) FOOT, COMPUTER CASE, ANTEC P280 [CARPET FRIENDLY]:
https://www.thingiverse.com/thing:1206631

(FBP-120) PLATE, BLANKING, FAN, 120 mm:
https://www.thingiverse.com/thing:2449654

THANK YOU FOR WATCHING
VOTE, COMMENT AND FOLLOW

SOUNDTRACK
'Ossuary 7 - Resolve' [SECTION 1]
by Kevin McLeod
(incompetech.com)

'I Can Feel It Coming' [SECTION 2]
by Kevin McLeod
(incompetech.com)

'Twisting' [SECTION 3]
by Kevin McLeod
(incompetech.com)

'Werq' [SECTION 4 & SECTION 5]
by Kevin McLeod
(incompetech.com)

'Furious Freak' [SECTION 6 & SECTION 7]
by Kevin McLeod
(incompetech.com)

SOUNDTRACK LICENSED UNDER
Creative Commons:
By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/

This video shows a simple 3D printed 'Relief Elbow' for a standard USB printer cable, to prevent damage to the cable from kinking, if cable has no support.

The part shown in the video is an SBS Extensions design part, USB1-40-21. The STL files for the Relief Elbow can downloaded from Thingiverse at: https://www.thingiverse.com/thing:2225620.

SOUNDTRACK
'Ossuary 7 - Resolve' [Title]
'Special Spotlight' [Action] '
A Surprising Encounter' [Credits]
by Kevin McLeod (incompetech.com)

SOUNDTRACK LICENSED UNDER
Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/

This video shows how to replace a (damaged) Y-Idler with a new one. The new Y-Idler shown in the video is an SBS Extensions design part, PRMK2-Y-IDLER, which does not use the OEM washers under the screw and nut.

The STL files for this Y-Idler can downloaded from Thingiverse at: https://www.thingiverse.com/thing:2209043.

SOUNDTRACK
'Ossuary 7 - Resolve' [Title]
by Kevin McLeod
(incompetech.com)

'Funky Suspense' [Action]
by Bensound.com

'A Surprising Encounter' [Credits]
by Kevin McLeod
(incompetech.com)

SOUNDTRACK LICENSED UNDER
Creative Commons:
By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/

REFERENCE INFORMATION
by PRUSA RESEARCH
(http://www.prusa3d.com/)

PRUSAI3_MK2_STL.ZIP

This is an improved filament spool hanger/holder for the Original Prusa i3 MK2/2S/3. There are two (2) basic modular designs: a cantilever and a double supported one.

The STL files for the spool hanger/holder can downloaded from Thingiverse at: https://www.thingiverse.com/thing:2152197.

This design will fit a standard Original Prusa (Research) i3 MK steel frame, same as the OEM "spoolholdah".

SOUNDTRACK
Ossuary 7 - Resolve (Title)
Nowhere Land (Action)
A Suprising Encounter (Credits)

COMPOSED & PERFORMED
by Kevin McLeod (incompetech.com)

SOUNDTRACK LICENSED UNDER
Creative Commons:
By Attribution 3.0
https://creativecommons.org/licenses/by/3.0/

REFERENCE INFORMATION
by PRUSA RESEARCH
(http://www.prusa3d.com/)

PRUSAI3_MK2_STL.ZIP
SPOOL HOLDAHMK3.STL

This video details the steps and materials required to perform a full PEI sheet (foil) replacement on the (Prusa Research) Original Prusa i3 MK2 Heatbed.

SOUNDTRACKS
Ossuary 7 - Resolve (Title)
Fearless (Action)
A Surprising Encounter (Credits)

COMPOSED & PERFORMED
by Kevin McLeod (incompetech.com)

SOUNDTRACK LICENSED UNDER
Creative Commons:
By Attribution 3.0 https://creativecommons.org/licenses/by/3.0/

REFERENCE INFORMATION PRUSA RESEARCH (http://www.prusa3d.com/)
English Manuals:
- Replacing the PEI Sheet (https://manual.prusa3d.com/Guide/Replacing+the+PEI+sheet/133)
- Electronics Assembly (https://manual.prusa3d.com/Guide/8.+Electronics+assembly/110)
(Original Prusa i3 MK2 kit assembly v1.05)

This video shows a prototype of an Inclined Front Grip for a Just Right Carbine 7" (inch) OEM handguard, with a MIL-STD-1913 (Picatinny) Accessory Rail (Quad Rail). The intent of the this prototype was two-fold; to improve the ergonomics and proprioception, along with the handling of the firearm.

The STL file for the prototype can be downloaded from Thingiverse: https://www.thingiverse.com/thing:2507460. The INCLINED FRONT GRIP (JRC-IFG5) shown in this video was 3D printed and prototyped using a Taulman3d TECH-G 1.75 mm filament on a Prusa MK2.

SOUNDTRACKS:
'Ossuary 7 - Resolve' [Title] by Kevin McLeod (incompetech.com)
'Super Power Cool Dude' [Action] by Kevin McLeod (incompetech.com)
'A Surprising Encounter' [Credits] by Kevin McLeod (incompetech.com)

SOUNDTRACK LICENSED UNDER Creative Commons: By Attribution 3.0
https://creativecommons.org/licenses/by/3.0/

This video shows a prototype of an Inclined Front Grip for a Just Right Carbine 7" (inch) OEM handguard, with a MIL-STD-1913 (Picatinny) Accessory Rail (Quad Rail). The intent of the this prototype was two-fold; to improve the ergonomics and proprioception while handling a JR Carbine with its 7" OEM quad rail handguard.

The STL files for the SBS IFG prototypes can be downloaded from SBS Extensions Thingiverse channel:
- https://www.thingiverse.com/thing:1635523 [(JRC-IFG1C) INCLINED FRONT GRIP, JUST RIGHT CARBINE, 7" OEM HANDGUARD]
- https://www.thingiverse.com/thing:1639209 [(JRC-IFG1D) INCLINED FRONT GRIP, SBR (PDW), HANDGUARD]
- https://www.thingiverse.com/thing:2507460 [(JRC-IFG5) INCLINED FRONT GRIP - "STILETTO"]

Soundtrack:
'Ossuary 7 - Resolve' [Title]
by Kevin McLeod (incompetech.com)

'Floating Cities' [Action]
by Kevin MacLeod (incompetech.com)

'A Surprising Encounter' [Credits]
by Kevin McLeod (incompetech.com)

SOUNDTRACK LICENSED UNDER
Creative Commons:
By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/

This video shows a bolt and magazine well lockout prototype device for a Just Right Carbine, chambered in 9x19mm with a Glock magazine well.

The STL file for the prototype can be downloaded from Thingiverse: https://www.thingiverse.com/thing:1598395

The BOLT MAG LOCKOUT was 3D printed using a 1.75mm N-VENT filament on a modified MakerBot Replicator 2X.

Soundtrack:
'Ossuary 7 - Resolve' [Title]
by Kevin McLeod (incompetech.com)

'New Dawn' [Action]
by Bensound (bensound.com)

'A Surprising Encounter' [Credits]
by Kevin McLeod (incompetech.com)

SOUNDTRACK LICENSED UNDER
Creative Commons:
By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/

Organized way to carry and store ammunition in an M19A1 canister - primarily for 7.62 NATO (7.62x51) / .308 Win ammunition. The video only shows a case being filled partially. This is due to the lack of un-boxed ammunition during the filming, otherwise the case can be filed up to its maximum capacity - there is no restriction, the center slots can also be used.

STL files for 3D Printing the Ammo Tray Case Assembly can be downloaded from Thingiverse:
- (AT1-762NATO) https://www.thingiverse.com/thing:1031943
- (AT1-556NATO) https://www.thingiverse.com/thing:1646912
- (AT1-762x39) https://www.thingiverse.com/thing:1655160

SOUNDTRACK:
'Ossuary 7 - Resolve' [Title]
by Kevin McLeod (incompetech.com)

'Memories' [Action]
by Bensound (bensound.com)

'A Surprising Encounter' [Credits]
by Kevin McLeod (incompetech.com)

SOUNDTRACK LICENSED UNDER
Creative Commons:
By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/

This video shows the application of an M14 (M305, SOCOM) specific (empty) Chamber Safety Flag prototype (CF2), angled for improved functionality. This is a 3D printed proof of concept, using an ABS filament. A free STL file can be downloaded from Thingiverse: https://www.thingiverse.com/thing:1010991.

This video shows the application of an M14 (M305, SOCOM) specific (empty) Chamber Safety Flag; a 3D printed proof of concept, using an ABS filament. You can download a free STL file of this Chamber Safety Flag (S18_CF1) at MakerBot's Thingiverse: https://www.thingiverse.com/thing:978725.

This video shows off a buttstock adapter for a Dominion Arms JW-83 or JW-87 (Backpacker) and a standard AR collapsible buttstock. The adapter was 3D printed using a 1.75mm ABS filament on a MakerBot Replicator 2X.

Soundtrack: Memories
Composed & Performed by: Bensound (www.bensound.com)

This video is showing an aluminum buttstock adapter for a Dominion Arms JW-83 or JW-87 (Backpacker). The adapter was machined from a billet of Aluminum 6061-T6, acid etched and alodined.

A short video showing 3D printing of Prototype Buttstock Adapter (BA6) for DA JW-83/87 Backpacker. Printing was done on a Makerbot Replicator 2x Experimental, using a red ABS filament.

This video shows an initial (AR) Buttstock Adapter Prototype (BA4) Installation on a Short Barrel Shotgun model JW-83 "Backpacker" by Dominion Arms. The intent of the prototype AR buffer tube adapter is to improve the SBS functionality by providing a length-of-pull flexibility from the minimum 26" OAL, and greater. The prototype is 3D printed and was made from a PLA filament, as such, is purely meant for installation and fit check.

Visit SBS Extensions Thingiverse page at https://www.thingiverse.com/SBSExtens... for the latest free designs.

Soundtrack: A New Beginning - Composed and Performed by Bensound (http://www.bensound.com).

This video shows the tools and steps to remove, inspect and reinstall a Shell Extractor and a Retaining Pin from a Short Barrel Shotgun model JW-83 "Backpacker" by Dominion Arms.

Soundtrack: Jazzy Frenchy - Composed and Performed by Bensound (http://www.bensound.com).

This is an instructional video on how to fix (two) stripped wood screw holes in the factory wood buttstock of a Short Barrel Shotgun model JW-83 "Backpacker" by Dominion Arms, sold in Canada.

Soundtrack: Going Higher - Composed and Performed by Bensound (http://www.bensound.com).

This video shows steps and tools required to reassemble a Short Barrel Shotgun model JW-83 "Backpacker" produced by Dominion Arms (Norinco).

This video shows steps and tools required to disassemble a Short Barrel Shotgun model JW-83 "Backpacker" produced by Dominion Arms (Norinco). Specifically, this video shows the steps taken to disassembly the firearm furniture only; it does not show disassembly of firearm receiver or the barrel-mounted extractor.
[Please note that this is not a firearm review video.]
Thank you for watching.

SHOW MORE

Created 1 year, 6 months ago.

22 videos

CategoryOther

Instructional videos, prototyping, testing and 3D printing.