thewulf56

thewulf56

thewulf56

subscribers

In this Video I attempt to cast a Roman Maintz Gladius in solid Aluminum. The Pattern was printed on my 3D Printer(Ender 3 Pro).

Check out my Esty shop to see some Items I have made and up for sale. https://www.etsy.com/shop/Thewulf56

100 Subscriber Give-A-Way, Remember that I will be do a giveaway once I reach the desired Goal of 100 Subs. Winners will be picked from comments on the video or Videos that is declared after reaching the Goal. So please, Like, Comment and Subscribe, if you want to be eligible. Thanks.

Roman Mainz Gladius by justrust17
https://www.thingiverse.com/thing:3068953/files

Always remember safety, when dealing with Molten Metal.

Check out my other Videos: https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w

Be sure to like and subscribe if you liked the Videos.

Also, take a look at a couple of my fellow casters.
Learned a lot from these guys:

ArtbyAdrock
https://www.youtube.com/channel/UCbgMwToNGjwwgn9BRnzAmEQ

bigstackD Casting
https://www.youtube.com/user/bigstackD

Check out their Channels, they have some really great Videos

In this Video, I will sand Cast Drax the Destroyer's Daggers out of Aluminum.The Pattern was printed on my 3D Printer(Ender 3 Pro).

Check out my Esty shop to see some Items I have made and up for sale. https://www.etsy.com/shop/Thewulf56

100 Subscriber Give-A-Way, Remember that I will be do a giveaway once I reach the desired Goal of 100 Subs. Winners will be picked from comments on the video or Videos that is declared after reaching the Goal. So please, Like, Comment and Subscribe, if you want to be eligible. Thanks.

The pattern was designed by A SKEWED VIEW 3D.

Check out their Designs, that are cut and split,
https://gumroad.com/a_skewed_view3d?s...

A SKEWED VIEW 3D YouTube page:
https://www.youtube.com/channel/UCryqg_iv2N5XOh4teB45eSw

Always remember safety, when dealing with Molten Metal.

Check out my other Videos: https://www.youtube.com/channel/UCJd3...
Be sure to like and subscribe if you liked the Videos.

Also, take a look at a couple of my fellow casters.
Learned a lot from these guys:

ArtbyAdrock
https://www.youtube.com/channel/UCbgM...

bigstackD Casting
https://www.youtube.com/user/bigstackD

Check out their Channels, they have some really great Videos

In this Video, I will be melting down an old radiator, to make some good Ingots to use in a future project. I will also melt down some old Zinc fittings into some marvelous Thewulf56 Maker Coins. These coins are available in my Etsy Store.

Check out my Esty shop to see some Items I have made and up for sale. https://www.etsy.com/shop/Thewulf56

100 Subscriber Give-A-Way, Remember that I will be do a giveaway once I reach the desired Goal of 100 Subs. Winners will be picked from comments on the video or Videos that is declared after reaching the Goal. So please, Like, Comment and Subscribe, if you want to be eligible. Thanks.

The pattern was designed by A SKEWED VIEW 3D.
Thingiverse File https://www.thingiverse.com/thing:296...

Check out their Designs, that are cut and split, https://gumroad.com/a_skewed_view3d?s...

A SKEWED VIEW 3D YouTube page:
https://www.youtube.com/channel/UCryq...

Always remember safety, when dealing with Molten Metal.

Check out my other Videos: https://www.youtube.com/channel/UCJd3...
Be sure to like and subscribe if you liked the Videos.

Also, take a look at a couple of my fellow casters.
Learned a lot from these guys:

ArtbyAdrock
https://www.youtube.com/channel/UCbgM...

bigstackD Casting
https://www.youtube.com/user/bigstackD

Check out their Channels, they have some really great Videos

In this Video, I will sand Cast Medevil Mjolinar in Aluminum. In this video, I wil cast the Handle and attach the 2 parts. The Pattern was printed on my 3D Printer(Ender 3 Pro).

100 Subscriber Give-A-Way, Remember that I will be do a giveaway once I reach the desired Goal of 100 Subs. Winners will be picked from comments on the video or Videos that is declared after reaching the Goal. So please, Like, Comment and Subscribe, if you want to be eligible. Thanks.

The pattern was designed by A SKEWED VIEW 3D.
Thingiverse File https://www.thingiverse.com/thing:296...

Check out their Designs, that are cut and split, https://gumroad.com/a_skewed_view3d?s...

A SKEWED VIEW 3D YouTube page:
https://www.youtube.com/channel/UCryq...

Always remember safety, when dealing with Molten Metal.

Check out my other Videos: https://www.youtube.com/channel/UCJd3...
Be sure to like and subscribe if you liked the Videos.

Also, take a look at a couple of my fellow casters.
Learned a lot from these guys:

ArtbyAdrock
https://www.youtube.com/channel/UCbgM...

bigstackD Casting
https://www.youtube.com/user/bigstackD

Check out their Channels, they have some really great Videos

In this Video, I will sand Cast Medevil Mjolinar in Aluminum. Due to time Constraints, I will do a followup video when I complete the Finish work on the Hammer. This is only the casting and the cleanup process. The Pattern was printed on my 3D Printer(Ender 3 Pro).

100 Subscriber Give-A-Way, Remember that I will be do a giveaway once I reach the desired Goal of 100 Subs. Winners will be picked from comments on the video or Videos that is declared after reaching the Goal. So please, Like, Comment and Subscribe, if you want to be eligible. Thanks.

The pattern was designed by A SKEWED VIEW 3D.
Thingiverse File https://www.thingiverse.com/thing:2964782

Check out their Designs, that are cut and split, https://gumroad.com/a_skewed_view3d?sort=page_layout

A SKEWED VIEW 3D YouTube page:
https://www.youtube.com/channel/UCryqg_iv2N5XOh4teB45eSwK

Always remember safety, when dealing with Molten Metal.

Check out my other Videos: https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber
Be sure to like and subscribe if you liked the Videos.

In this Video, I will be casting Loki's Dagger form Thor Ragnarok. Watch till the end to see how it turned out. Hope you enjoy it. I've only been at this a short while, but, it is very fun, and rewarding. Sometimes the pour turns out great, and sometimes they totally flop. You live and learn and then try again. I always welcome any tips. Always remember safety, when dealing with Molten Metal.

Check out my other Videos: https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

Don't forget, I'll be doing a GIVEAWAY once I reach a 100 Subscribers, About half way there, so hit that subscribe button. Tell your friends.

In this video I will be making some copper coins, they were directly poured in a bunch of Graphite molds that I have. I had another project planned, but, it was/is having some technical difficulties.
Always remember safety, when dealing with Molten Metal.


Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

In this Video, I casted The Lone Wolf Dagger and my Wolf Emblem. The dagger was 3D printed, and the file came from Thingiverse. Hope you enjoy it. I've only been at this a short while, but, it is very fun, and rewarding. Sometimes the pour turns out great, and sometimes they totally flop. You live and learn and then try again. I always welcome any tips. I'm still small scale, but, hope to be running with the big dogs soon. Always remember safety, when dealing with Molten Metal. Check out my other Videos: https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber
Be sure to like and subscribe if you liked the Videos.

In this video, I sand casted the Shadow Dagger from the video game Counter Strike: Global Offensive. The pattern was downloaded from Thingiverse. I had plenty of room in the casting box, so I added another Lone Wolf Dagger. These were both casted in Aluminum Bronze. If anyone has any suggestions on what I should try to cast next, please let me know. Always remember safety, when dealing with Molten Metal.

Check out my other Videos: https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

In this video, I 3D printed the Karambit Dagger from the video game CSGO. I got the file from Thingiverse. Had a couple Blemishes, but it turned out pretty good. Hope you enjoy the video, Please remember to Like and Subscribe to see new videos. Always remember safety, when dealing with Molten Metal.
Check out my other Videos: https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber
Be sure to like and subscribe if you liked the Videos.

In this video, I will sand cast some brass maker coins that I designed. They didn't turn out perfect, but I did get a few decent ones. I'm gonna redesign them and try again at a later time. I printed the patterns for theses on my 3D printer. Always remember safety, when dealing with Molten Metal.

Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber
Be sure to like and subscribe if you liked the Videos.

In this video, I'll the sand Cast Mehrunes Razor from Skyrim video game series. I'll be casting this in Aluminum Bronze. The Pattern used was 3D Printed on my 3D printer, the file was Downloaded from Thingiverse. Please remember To like and Subscribe, and ring the bell to get notified of future videos. If you have any suggestions of what I should cast next, please leave a comment on the video. Thanks

Always remember safety, when dealing with Molten Metal.

Check out my other Videos: https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber
Be sure to like and subscribe if you liked the Videos.

In this video, I will attempt to melt Cast Iron. This is my very first try, and hopefully, it will work out. I will be casting, a custom 3D printed Ingot mold I created. The end result wasn't perfect, I will definitely be trying this again, with an improved design. It was a good learning experience, and a very fun project. I had some printing issues with my 3D printer, which is why the print was so crappy that I had to try to repair with some wax. Pattern was a bit rough, so it didn't release from the sand as good as it should have, but turned out good. Watch the Video and see for yourself. Please like and subscribe, and ring the bell to get notified of future videos.

Always remember safety, when dealing with Molten Metal.

Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

In this video, I will be un-boxing and setting up my new Devil Forge FB2M–10KG Gas Furnace, then I will use it to melt an old Aluminium TV Antenna. I hope you live the Video.
Always remember safety, when dealing with Molten Metal.
Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber
Be sure to like and subscribe if you liked the Videos.

This is my video of me creating my submission for the #2019openersopen. I made mine to represent my Wolf Emblem.
Always remember safety, when dealing with Molten Metal. #2019openersopen

Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

In this video, I will be melting down some scrap aluminum to make some Ingots to be used for future casting projects, and will be using some to make some Aluminum Bronze in the near future. Always remember safety, when dealing with Molten Metal.

Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

In this video, I will be melting down some scrap Copper to make some Ingots to be used for future casting projects, and will be using some to make some Aluminum Bronze in the near future. Always remember safety, when dealing with Molten Metal.

Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

In this Video, I will be heating up some Rotors out of Electric Motors in order to get the Aluminum out of them. I don't know if there are other ways, maybe there are, maybe there aren't. It's Just the way I did it, it was fun, and I got some more aluminum that I can use in some of my future castings. As far as scrap value, this is not the most economical method. If you just out to experiment and have fun, then, jump on in and try it. Thumbs up if you liked the Video, and don't forget to hit that SUBSCRIBE Button and click the bell to get notified of future videos. Always remember safety, when dealing with Molten Metal.

Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

In this video, I will be making Aluminum Bronze. I will be using the copper and aluminum from my previous videos.This will be used to make some cool casting at a later date. I will have some good casting videos coming out soon, But, it will be when I am back home from vacation. Always remember safety, when dealing with Molten Metal.

Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

In this Video, I'm going to make some big Brass Bars(Ingots) out of some old scrap Brass. These ingots will be used later on in future casting projects. Always remember safety, when dealing with Molten Metal.

Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

Just a quick Midweek video, In this video, I am melting some old zinc fittings and electrical box covers. Please give a Thumbs up and hit that subscribe button and ring the bell to get notified of future videos.

Always remember safety, when dealing with Molten Metal.

Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

In this Video, I will be Casting the Cat's Paw Dagger. Took A lot of work to get this one ready, took nearly 2 weeks get it to where it needed to be. This was done in 2 pours, the Blade and Handle, Blade was made from Aluminum and the Body was made from Brass. Take a look and see the process of the Dagger's Creation. Don't forget to Hit the Subscribe button if you have not already Done so, and ring the bell, to get notified of future releases. Hit that Like Button on your way out. Thanks for Watching. Cats Paw 3D Pattern printed off Thingiverse by 3DDesignLife. Always remember safety, when dealing with Molten Metal.

Check out my other Videos: https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

In this Video, I'll be sand casting the Hobbit Sword "Sting" from Lord of the Rings and The Hobbit. I''ll be making this in Aluminum Using my Devil Forge Furnace. If you have any questions, please let me know. If you have any ideas on what I should cast next, Leave me a message.The file used is based on the Thingiverse File by by plokr Sting - Bilbo's sword / dagger. https://www.thingiverse.com/thing:3494511 Always remember safety, when dealing with Molten Metal.

Check out my other Videos: https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber
Be sure to like and subscribe if you liked the Videos.

In this video, I will be sand cast a custom Avengers/Captain America Shield Coins. The patterns were Printed with my 3D Printer and were cast in Aluminum Bronze. I used PetroBond Sand to make the molds. Always remember safety, when dealing with Molten Metal. A special thanks to my wife for helping me paint the coin.

Check out my other Videos:

https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber

Be sure to like and subscribe if you liked the Videos.

In this video, I will Cast the Wonder Woman "God Killer" Sword out of aluminum. I printed the pattern for this sword on my 3D printer. The file was downloaded off Thingiverse and was created by prophicy Feb 12, 2018 https://www.thingiverse.com/thing:2791316

The Runes on the sword aren't exactly like the ones on the movie sword, but, its still a really good sword.

Always remember safety, when dealing with Molten Metal. Check out my other Videos: https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber
Be sure to like and subscribe if you liked the Videos.

SHOW MORE

Created 1 month, 1 week ago.

28 videos

CategoryOther