#3dprinting

This is more than just 3D printing, this is the entire process of making metal items using a combination of 3D printing and investment casting. This is a process I became aware of while in the process of getting my engineering degree, but never did until now. I am entirely self-taught with casting, and I've documented my successes and failures on Hive: https://hive.blog/hive-103035/@steampunkkaja/bronze-rings-cast-from-3d-printed-patterns

In order to drown out the noise upstairs of my shop while I worked, I put on some Russian classical music. Expect to hear Tchaikovsky, Rimsky-Korsakov, Borodin, Prokofiev, and Glinka.

2 months ago

Several of my electronic devices started acting up recently, as I documented here:
https://hive.blog/tech/@steampunkkaja/electronics-vex-me-i-fix-them
The fixes are rather simple, and in this short video, I show you exactly how to remove the LCD panel from the Form 3 for repair purposes while listening to Russian synthwave (mainly to drown out the noise upstairs, which I didn't feel like listening to myself, hence not adding the music during editing, as I have previously done).

3 months, 1 week ago

3D Printed Wheels Created By William Durham, JR Of Durham 3D
https://www.facebook.com/Mr.Bu11

Video Recorded & Edited By Lois Riley Durham
http://www.loisrileydurham.com
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
► Show Your Support By Donating Via
Ko-fi: https://ko-fi.com/loisrileydurham
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
► Check Out My Official
Website: https://loisrileydurham.com
Podcast: https://loisrileydurham.com/thelrdshow
Merch: https://loisrileydurham.com/merch
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
► Follow Me On
Facebook: https://www.facebook.com/loisrileydurham
Instagram: https://www.instagram.com/loisrileydurham
LinkedIn: https://www.linkedin.com/in/loisrileydurham
Pinterest: https://www.pinterest.com/loisrileydurham
TikTok: https://www.tiktok.com/@loisrileydurham
Tumblr: http://loisrileydurham.tumblr.com
Twitch: https://www.twitch.tv/loisrileydurham
Twitter: https://twitter.com/LoisRileyDurham
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
► Business Inquiries:
Contact Me: [email protected]
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
DISCLAIMER: Please be advised that some of the links in my videos may be affiliate links and I do receive a small commission if you make a purchase using those links. I appreciate your support if you do and if you don’t... no worries. ❤
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
Thanks for watching!

3 months, 2 weeks ago

Me blundering through my current version of my printed frame.

Quick start guide from CTRL+Pew https://ctrlpew.com/the-complete-getting-started-guide/

Gunny's website https://www.gunnymcgunsmith.com

I used Filacube PLA2 olive green and black to print this frame, None printed parts will be listed in a parts list when completed.

3 months, 2 weeks ago

My review after having printed with the AnyCubic Mega X for 2 months. Is this the right printer for you? My #3dPrintersMicroswiss Direct drive, Ender 3 pro, TH3d board and ABLANY CUBIC Mega XMy social media platform

Minds https://www.minds.com/DarkMavrik/
Bitchute https://www.bitchute.com/channel/FOEG6gbciuh0/
LBRY.tv and Odysee.com https://odysee.com/@GreenHornMotorSports:8
Rumble https://rumble.com/c/c-540753

3 months, 3 weeks ago

and tested a small stream sluice box. It only cost me $19 AUD (about $14.50 USD) in materials (ABS plastic) and few days printing time (both cost and time could be minimised if I can manage to stop the warping problem). Its lightweight, tough enough, and despite the less than ideal conditions and truncated test it proved it can can catch very fine gold. All things considered Im willing to tentatively call it a success at this point...pending further tests when the weather improves. So far I'd say that this sluice would be a great cost effective addition to any budding prospectors arsenal.

Originally Published: 27th September 2016

3 months, 4 weeks ago

virtual gun p0rn

4 months ago

Just a small update on how things are going. Remember to like and subscribe for more.

5 months, 1 week ago

First of all, thank you to Elegoo for sending this Mars 2 Pro to unbox. I can't wait to get it going. I did the unboxing on the stream and had a visitor that was adamant about getting some attention near the end of the stream.

I also showed off the SL1 that Sovol 3D sent me. Along with the extra vat they sent that fits the Mars Pro 2 as well as the Mars and Photons.

I'll have more details on both, on my website: https://makerfun3d.com/

Sovol 3D sent me an SL1 (http://3dmkf.com/Sovol-SL1) to test out. This was sent to me free of charge, but I have not been paid to talk about it. The prints come off the Elegoo Mars Pro 2 using their water washable beige resin.

The Links - These are Affiliate links:
My site: http://makerfun3d.com/
The Sovol 3D SL2: http://3dmkf.com/Sovol-SL2
The Sovol 3D SL1: Amazon: http://3dmkf.com/SVAMZ-SL1 | Sovol: http://3dmkf.com/Sovol-SL1
The Sovol 3D Flex Plate: Amazon: http://3dmkf.com/SVAMZ-SM-FlexPlate-Resin | Sovol: http://3dmkf.com/Sovol-Sm-FlexPlate-Resin
The Sovol 3D Resin Vat (For Mars Variants and Photon Variants): Amazon: http://3dmkf.com/SVAMZ-SL1Vat | Sovol:http://3dmkf.com/Sovol-MarsPhoton-Vat
Elegoo Mars Pro 2 Resin Printer: https://amzn.to/2HxkgsC
Elegoo Water Washable Resin: https://amzn.to/2HDKVnO

5 months, 1 week ago

There were some audio issues at the beginning, so they were trimmed out. Thankfully, I had just pulled the Longer 3D Box out of the shipping box, so nothing was really lost.

The Longer3D Orange 10 is a smaller format 3D resin printer than others I am used to. But it built strong. In this video, I put it together, slice a file using their slicer and start a print.

Longer 3D Orange 10 on Amazon: https://amzn.to/2XFtGIw

The Longer 3D Orange 10 is also known as the Alfawise W10 on Gearbest.

5 months, 1 week ago

Support The Channel Via The Rabbits Hole Merch!

Now Available Here: https://teespring.com/stores/the-rabbits-hole-swag-shop

Use Code RBT2 for FREE SHIPPING

Veteran Owned Businesses That Sponsor This Channel:

Panda Madness Candles- https://pandamadnesscandles.com/?fbclid=IwAR3k8_tXAhgDo1XKt0ShKxW1lVT1x1m64uJAA64GNHciUYEqeP54oFN9xpA

Subscribe Star: https://www.subscribestar.com/the-rabbits-hole

Facebook Page: https://www.facebook.com/TheRabbitsHolePoliticalCommentary

Facebook Group: https://www.facebook.com/groups/IntoTheRabbitsHole

Twitter: https://twitter.com/ThisDeadRabbit

Welcome to The Rabbits Hole. Today, as every day, we're gonna discuss a wide variety of topics, in a format that really allows us to stretch out legs and dig into them. Thanks for tuning in everyone. Stay breathtaking!

The views we express, in reference to or as part of, our experiences as US Army Veterans, are and always have been, our own. We do not speak for all veterans, or service members, past, present or future. However, as veterans, we do feel we are in a unique place to discuss things with that voice. As always ladies and gentlemen, we want to thank you for joining us on today's adventure. If you are a vet in crisis, please call the veterans crisis line, (Call 1-800-273-8255 and Press 1, or Text 838255, or chat live at https://www.veteranscrisisline.net/?gclid=Cj0KCQjwjMfoBRDDARIsAMUjNZpL0V6T7yJYnQt_J7f6CfzBrUMsLTiN1wjDO4vfBiPHzstO91Uo25UaAjNgEALw_wcB ), the life you save could be your own. We are also always available for vets to talk to and consult with about VA claims, and the VA in total. We can't promise to be able to fix your issues, but we can at least listen. Thank you for your service.

Of course I want to be discussing these topics with as many people as humanly possible. Bringing all of you news and politics has been rewarding and fun so far! So feel free to like/share/subscribe/comment!

6 months ago

Let's talk about some topics tonight

Grab our book, Re-Constutute US: To Form a More Perfect Union. Available at: https://books2read.com/Constitute

Merch and Support:
Tips & Subscriptions: http://RhetoricalEntertainment.com
StreamLabs: https://streamlabs.com/rhetoricalentertainment1
Redbubble: https://www.redbubble.com/people/RhetoricalEnt

#Ridgedale #ArthurTheHat #MitchTheRipper

6 months ago

Tie Fighter Pilot Helmet 3d Print
short time lapse of a tie fighter piolot helmet 3d print
➤SUBSCRIBE FOR MORE LIKE THIS : https://bit.ly/2WItPIY :)

This Video :
➤Link:https://youtu.be/PeC50psk2Hw
Wanna Chat?
**************
Join the discussion on Discord https://discord.gg/HRCmDB4

WAYS TO SUPPORT THE CHANNEL
************************************
✔️LIKE THE VIDEO
✔️SUBSCRIBE TO THE CHANNEL
✔️WATCHING THE STREAM

☕Buy me a Kofi☕
☕☕☕☕☕☕☕☕☕☕☕☕☕☕
https://www.Ko-fi.com/ricardosgaming

Affiliate Links:
***************

Music: http://www.purple-planet.com
**Miguel Johnson Ambient and Immersive Music**
*****************************************************
https://soundcloud.com/migueljohnsonmjmusic/gaia-beyond-theme/s-JZ1U8
Miguel's new Album The Explorers - Available Now!
****************************************************
https://www.youtube.com/watch?v=dDEFiRZegs4&feature=youtu.be

#starwars #tiefighterhelmet #cosplay

6 months, 1 week ago

A quick update to let you know where I currently am in my printed gun adventure.

6 months, 3 weeks ago

Removing 3d print lines with epoxy resin & glass microspheres, embedding the mask in clay on flange material and covering it with fiberglass to create a mold which will later be used to form a forged carbon fiber Death Stranding Higgs half-mask.
·······················································
▶▶▶ Supplies◀◀◀
Pro Marine Table Top Epoxy Resin
USA: https://amzn.to/3hK1M4Y
CA: https://amzn.to/2TJCgDf
Glass Microspheres
USA: https://amzn.to/2EQPbP2
CA: https://amzn.to/2YM6Caz
Chavant Clay: https://amzn.to/3aOkrsw
Mold Release Wax: https://amzn.to/2YOSai8
PVA Mold Release: https://amzn.to/2QKicyg
Perma-Grit Sanding Block
USA: https://amzn.to/37ZZkms
UK: https://amzn.to/33MdWTg
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
CA: https://amzn.to/2Z4yHaE

Recorded on Canon Powershot G7X: http://amzn.to/2oqPTEu
Lighting Kit: https://amzn.to/2DfaMiG
·······················································
The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

7 months, 1 week ago

Shooting my PDW lower and the SVTR lower. And some thoughts about how it is going.

7 months, 1 week ago

Israel and 2 other countries are planning to make an Alternative-meat through 3D printing!!?

8 months, 1 week ago

why are we paying 500K+ for median sized homes that is built with wood that last max 60 years, when we have technology like this
5K for a house, that could last 1000's of years

8 months, 2 weeks ago

🌌 The first 500 people who click the link will get 2 free months of Skillshare Premium: https://skl.sh/jaketran2

🎥 Business is complicated. Subscribe to simplicity // http://bit.ly/jt-sub
📸 Follow me on IG // @jaketran.io // http://bit.ly/jt-ig

💸 Want to support this channel monetarily? The best way to do so is by picking up some of the great products from myself and my amazing partners below.

100% optional, 100% appreciated

📃 (Free) 6 simple resume secrets I used to land my $40/hr remote dream job // http://bit.ly/free-resume-secrets

💹 (Free) Get two free stocks valued up to $1400 when you open a Webull account and deposit any amount // http://bit.ly/webull-jt

📚 Get 3 free audiobooks for life // https://amzn.to/2v58PSu

📜 The exact resume I used to get my $40/hr remote web dev job + a lot of bonuses // http://bit.ly/resume-secrets-now

💻 𝗧𝗵𝗲 𝗟𝗮𝗽𝘁𝗼𝗽 𝗟𝗶𝗳𝗲𝘀𝘁𝘆𝗹𝗲 𝗔𝗰𝗮𝗱𝗲𝗺𝘆:
Learn exactly how I landed my $40/hr work from home dream job ($83k/yr) at 19 years old and how you can go remote without experience or degree
Enroll now // http://bit.ly/LLA-yt

💾 My Editing Software // http://bit.ly/jt-CC

🎥 My video gear, setup, tech, books that changed my life, & more // https://amzn.to/2XZSXhx

📰 Sources & visuals // http://bit.ly/32lwfzp

-----------------------

This is the Czinger 21C. The unique part is that the 21C’s frame is made up of a lattice of 3D printed aluminum nodes connected together with carbon fiber poles. It represents the slow shift from traditional manufacturing to digitizing manufacturing into software

It represents the start of the 3D Printing Industrial Revolution

Meet Relativity Space, a startup cofounded by previous SpaceX and Blue Origin employees, they’re working on bringing 3D printing to disrupt aerospace engineering

Backed by big investors like Mark Cuban and Y Combinator, and partnered with giants like the US Air Force and NASA, they’ve created the world’s largest 3D printer to build rockets

Relativity retrofitted a giant robot arm to feed in aluminum wire and melt it on the spot with a powerful laser

SpaceX have already integrated 3D printing in their Dragon spacecraft via their SuperDraco Engines, in which the combustion chambers are fully 3D printed

Another startup called Launcher has a focus in helping the small satellite market launch more affordably with their 3D printed copper rocket engines

Back in Tabasco, Mexico, 3D printing is also hitting closer to home

Tabasco is home to some of the lowest income families in Mexico. This is the site that the startup, Icon, chose to create the world’s first 3D printed housing community. Thanks to their new Vulcan II concrete home 3d printer. The printer itself can build up to 2,000 sq ft in virtually any floorplan faster, with less waste, and at around half of the cost of traditional homebuilding. Icon’s 3D printed homes aren’t just for people living in absolute poverty

Desktop Metal have created a software that uses algorithms to generate the most efficient, strongest design, using the least amount of material

3D printing has been around for decades now, but it only really started making its way to the mainstream back in 2009. The biggest thing holding 3D printing back is still costs. Traditional mass production as you produce more goods the cost continues to drop - economies of scale. But with 3D printing the price doesn’t go down enough.

As 3D printing gets more affordable, as the printed parts get stronger, it’s gonna start making sense to use for more products

-----------------------

🌅 Join my Facebook Group for going remote // http://bit.ly/remote-job

-----------------------

All materials in these videos are used for educational purposes and fall within the guidelines of fair use. No copyright infringement intended. If you are or represent the copyright owner of materials used in this video and have a problem with the use of said material, please send me an email, [email protected], and we can sort it out.

Copyright © 2020 Jake Tran. All rights reserved.

Sound:

Leavv - Valley https://chillhop.com/artists/leavv/
j’san - Prom Night ft. nymano
https://chillhop.com/artists/jsan/
https://chillhop.com/artists/nymano/
Leavv - Home
Joey Pecoraro - Your Favorite Place https://chillhop.lnk.to/winter2017ID
Axian x J'san - Autumn Leaves
https://chillhop.lnk.to/FallEss2017ID
https://soundcloud.com/axiannn
https://soundcloud.com/iamjsan

Music by Chillhop: http://chillhop.com/listen
Listen on Spotify: http://bit.ly/ChillhopSpotify

DISCLAIMER: These videos are for entertainment purposes only. This is not meant to be financial advice. Please always do your due diligence and never stop learning. Best of luck!

AFFILIATE DISCLOSURE: Some of the links in this video description are affiliate links, meaning, at no additional cost to you, I may earn a commission if you click through and make a purchase and/or subscribe. I only promote products th

10 months ago

there are more TMC magazine winders out there. but this one is made to work for a dual mag setup.

Link to Tippmann TMC Dual Mag Winder or T15 mag
https://www.thingiverse.com/thing:3788031

11 months, 2 weeks ago

Here is a 3D printable MCS Box Drive Dmag Tower. I found the price to expensive for a piece of plastic so I made my own.

I have not field tested jet. but it seems to feed well. and it looks in place well on a MCS Bolt and Hurricane. note that it's a bit of a tight fit

Link to the MCS Box Drive DMAG/HELIX Magazine Tower
https://www.thingiverse.com/thing:3931853

11 months, 3 weeks ago

I have not field tested them jet. but there seems to be no problems

link to Tippmann TIPX TRIGGER
https://www.thingiverse.com/thing:3933933

11 months, 3 weeks ago

if you place the belt loop of your jeans in between the to loops of the pouch. that will prevent it form sliding all over the place

If you found this useful, please donate what you think it is worth to my paypal.me/dannyhoogesteger Help cover the time of design.
Thanks, Enjoy!

Nerf 1x or 2x Mag pouch belt edition
https://www.thingiverse.com/thing:4324257

Nerf 1x or 2x Mag pouch molle edition
https://www.thingiverse.com/thing:4324239

1 year ago

Wednesday, May 6th, 2020 - Top Headline
3D Printing, 3D Metal Printing, Metal 3D Printing, Metal 3D Printer, 3D Printer, Metal 3D Printer LED Light, LED Light 3D Printing, Selective Laser Beam Melting, Selective Electron Beam Melting, Graz University of Technology, Graz University of Technology 3D Metal Printer, 3D Metal Printer Patent, Patents,

Excerpt from www.slashgear.com
New 3D metal printer uses LED light source
Researchers at Graz University of Technology have created a new type of 3D printer that uses LED instead of laser sources for additive manufacturing of metal parts. The new 3D printer can optimize 3D metal printing for construction time, metal powder consumption, device costs, and post-processing work. The team behind the 3D printer has applied for a patent on the technology.
The 3D printer uses technology said to be similar to Selective Laser or Electron Beam Melting. The process uses a metal powder that is melted and then built up to form a component. The new technique is called Selective LED-based Melting (SLEDM) and eliminates two central problems with powder bed-based manufacturing processes.
Those central problems include the time-consuming production of large-volume metal components and the time-consuming manual reworking. SLEDM uses a high-performance LED beam that features LEDs specially adapted by lighting specialists Preworks and equips the complex lens system that allows the diameter of the LED beam to be focused.
The lens system allows the beam to be changed between 0.05 and 20 mm during the melting process. The changeable LED focus allows larger volumes to be melted per unit of time without having to do filigree internal structures. The lack of internal filigree structures reduces the production time of components and fuel-cell or medical technology production by a factor of 20.
The process also means that in contrast to other metal melting systems, the component is assembled from top to bottom, leaving the component exposed and reducing powder required to a minimum. Necessary post-processing can be carried out during the printing process. Currently, the printer is being used to produce bioresorbable metal implants, such as screws made of magnesium alloys used two treat broken bones. Those implants dissolve into the body after the fracture grows together, eliminating the need for a second surgery to remove the screws.
Source News Link
News Curated by Newsalite.com
https://www.slashgear.com/new-3d-metal-printer-uses-led-light-source-04619122/

1 year ago

the turn knob is easier to find and turn this way than the original.
the other 2 parts are mainly made to keep dust or rain out of the system.
the top door can be slide open en closed after reloading.

the other ring is so the opening in the tube and be turned down wards so sand can fall out. and rain haves a harder time to get in.

keep in mind when you try the turn out the original pin in of the slide. that this pin will most likely brake this happened with 2 out the 2 with me. so you need to trill it out and make some treats in there your self. so be warned!

Empire BT Spring Feed Magazine Upgrade
https://www.thingiverse.com/thing:3918515

1 year ago

here will I be showing what parts you need with this upgrade parts. to make a complete flashlight mount.

This mount will work for flashlight with a 28mm diameter. And will assemble with the original FMA flashlight mounting parts.

the Long mount is made for filming with IR lights with a IR sensitive camera. this way it will cover more wider field of vision for it.

FMA 28mm flashlight mount
https://www.thingiverse.com/thing:3792661

1 year ago

with this part you can place different brand of loaders on your mag loader with the adjustable feedneck.

the other original parts can be found at
https://www.thingiverse.com/thing:2918336

Tippmann TMC/TiPX and First Strike T15 mag loader feedneck MOD
https://www.thingiverse.com/thing:3918463

1 year ago

The name "Grozniy Klinok" is my best effort to translate "Baneblade" into Russian. I designed an oversized tank hull to fit a variety of Soviet weaponry on it, most notably three BMP-1 turrets and the main turret from a T-10. I did all of this just for fun, but the model was too good to not share. It was a bit of a pain to process, but I may improve upon it in the future. If you are interested in other variants, such as the Tëmniy Metch (Shadowsword), I'd be happy to draw something up for you. Then again, unless there is a Red Alert-themed tabletop game that I don't know about, I don't know what use such a thing would be.

How I designed this monstrosity: https://steemit.com/tanks/@steampunkkaja/soviet-baneblade-why-just-why

1 year, 1 month ago

In this video I show the the whole process in building a 3D printed robotic arm.

Music in this video
Learn more
Listen ad-free with YouTube Premium
Song
Epic Presentation-27169-RFR
Artist
Aleksandr Shamaluev
Album
Epic Music
Licensed to YouTube by
AdRev for Rights Holder (on behalf of AShamaluevMusic); AdRev Publishing, BMI - Broadcast Music Inc., and 2 Music Rights Societies

1 year, 1 month ago

Want to remove the straps and protect the antennas? I made a 3d file for that. https://www.thingiverse.com/thing:4225756
Or you can buy it from me here: https://gumroad.com/l/ImUtH
You'll have to excuse some blurry shots. My osmo is dumb about close focusing sometimes and it really doesn't matter in the long run so don't complain.
https://bestjuleah.net

Brief music is from here: https://freemusicarchive.org/music/Soft_and_Furious

1 year, 1 month ago

3D printing a Red Sea Max skimmer

1 year, 2 months ago

Get more information about the market: https://www.imarcgroup.com/3d-printing-market

The global 3D printing market size reached US$ 11 Billion in 2019. According to IMARC Group, the 3D printing market value is projected to reach US$ 29 Billion by 2025, expanding at a CAGR of 17.8% during the forecast period (2020-2025).

Want more information about this market? Request a free report sample: https://www.imarcgroup.com/3d-printing-market/requestsample

For India market research reports, visit: http://www.marketresearchindia.co.in

Browse Related Report

Robotics Market Report: https://www.imarcgroup.com/robotics-market

Wireless Sensors Market Report: https://www.imarcgroup.com/wireless-sensors-market

Contact Us

IMARC Group
30 N Gould St, Ste R
Sheridan, WY 82801, USA
Website: https://www.imarcgroup.com/
Email: [email protected]
USA: +1-631-791-1145
Follow us on twitter: @imarcglobal
Linkedin: https://www.linkedin.com/company/imarc-group

1 year, 2 months ago

Get Bitcoin for shopping, no extra Charge.
https://lolli.com/ref/RFNmh3KzXE

I tested my 3D printed DIY robot arm. And it has outstanding capabilities, comparable with some industrial robotic arms!
1. The precision of the robot is around 0.1mm.
2. The maximum speed is around 5.9cm/sec.
3. The maximum payload is around 150-200g.

All the files necessary for the build of this robot is on GitHub. Here is the link https://github.com/SkyentificGit/Smal...

Please support me on patreon. This will help me to develop robots like this to bring the bright future sooner!

One time donation:
https://www.paypal.me/Skyentific

If you want to help this channel, please support me on Patreon:
https://www.patreon.com/Skyentific

Instagram: https://www.instagram.com/skyentifici...
Facebook: https://www.facebook.com/SkyentificFace
Twitter: https://twitter.com/SkyentificTweet

1 year, 2 months ago

My first attempt a printing a functional gun of my own design, Nothing world shattering but you have to start somewhere and it is another option on the table.

1 year, 3 months ago

So, you want to print a simple galleon, suitable for game tokens? Well, here's what you're in for. I put Brahms’s Hungarian dances № 1 and № 4 as the background music, mainly to drown out all the background noise, since there was a lot more than just the monotonous basement drone this time.

Model file: https://www.wargaming3d.com/product/galleon-game-piece-1/

SLS-printed model in 1/900 scale: https://www.shapeways.com/product/96DXTN9EJ/1-900-galleon-game-piece-1?optionId=62914074&li=shops

Links:

Website:
https://kajminiatures.com

Shapeways:
https://www.shapeways.com/designer/steampunkkaja

WordPress Blog:
https://kjworldsong.wordpress.com/

Wargaming 3D:
https://www.wargaming3d.com/vendor/kajminiatures/

Modelling Vehicle History:
https://www.klueser.de/categorylist.php?cat=Modellhersteller&type=Kaja&language=en

Steemit:
https://steemit.com/@steampunkkaja

SubscribeStar:
https://www.subscribestar.com/kaja-blackwing

1 year, 3 months ago

So, you want to print your own Portuguese fleet caravel? Well, here's what you're in for. I put Dvořak’s Serenade in D minor, op. 44 as the background music, mainly to drown out all the background noise, since there was a lot more than just the monotonous basement drone this time.

Model file: https://www.wargaming3d.com/product/caravela-de-armada-game-piece/

SLS-printed model in 1/700 scale: https://www.shapeways.com/product/7UBK76E2X/1-700-caravela-de-armada-version-1?optionId=59168231&li=shops

SLS-printed model in 1/900 scale: https://www.shapeways.com/product/2QKLTNYJN/1-900-round-caravel-game-piece?optionId=62811819&li=shops

Links:

Website:
https://kajminiatures.com

Shapeways:
https://www.shapeways.com/designer/steampunkkaja

WordPress Blog:
https://kjworldsong.wordpress.com/

Wargaming 3D:
https://www.wargaming3d.com/vendor/kajminiatures/

Modelling Vehicle History:
https://www.klueser.de/categorylist.php?cat=Modellhersteller&type=Kaja&language=en

Steemit:
https://steemit.com/@steampunkkaja

SubscribeStar:
https://www.subscribestar.com/kaja-blackwing

1 year, 3 months ago

So, you want to print your own heavy bomb ketch? Well, here's what you're in for. I put the second and third movements of Tchaikovsky's Symphony № 6 as the background music, mainly to drown out all the background noise, since there was a lot more than just the monotonous basement drone this time.

Model file: https://www.wargaming3d.com/product/heavy-bomb-ketch/

SLS-printed model in 1/700 scale: https://www.shapeways.com/product/Q359T4644/1-700-heavy-bomb-ketch?optionId=64349402&li=shops

Links:

Website:
https://kajminiatures.com

Shapeways:
https://www.shapeways.com/designer/steampunkkaja

WordPress Blog:
https://kjworldsong.wordpress.com/

Wargaming 3D:
https://www.wargaming3d.com/vendor/kajminiatures/

Modelling Vehicle History:
https://www.klueser.de/categorylist.php?cat=Modellhersteller&type=Kaja&language=en

Steemit:
https://steemit.com/@steampunkkaja

SubscribeStar:
https://www.subscribestar.com/kaja-blackwing

1 year, 3 months ago

So, you want to print your own man-of-war? Well, here's what you're in for. I put the first movement of Tchaikovsky's Symphony in Four Tableaux, op. 58 (except for the last minute and-a-half, obviously) as the background music, mainly to drown out all the background noise, since there was a lot more than just the monotonous basement drone this time.

Model file: https://www.wargaming3d.com/product/man-of-war/

SLS-printed model in two different scales: https://www.shapeways.com/product/8QU5HVFE4/man-of-war?optionId=98067704&li=shops

Links:

Website:
https://kajminiatures.com

Shapeways:
https://www.shapeways.com/designer/steampunkkaja

WordPress Blog:
https://kjworldsong.wordpress.com/

Wargaming 3D:
https://www.wargaming3d.com/vendor/kajminiatures/

Modelling Vehicle History:
https://www.klueser.de/categorylist.php?cat=Modellhersteller&type=Kaja&language=en

Steemit:
https://steemit.com/@steampunkkaja

SubscribeStar:
https://www.subscribestar.com/kaja-blackwing

1 year, 3 months ago

Building a mounted dragon head with a jaw-dropping mechanism so items can be hidden inside.

| Supplies |
3D Model: https://lindydesignlab.com/product/dragon-secret-compartment-box/
Brush-On Super Glue
USA: https://amzn.to/324d9fX
UK: https://amzn.to/2MC27uB
CA: https://amzn.to/322ut4Q
Wood Burner
USA: http://amzn.to/2mjbaCy
UK: https://amzn.to/2ERPhmy
CA: https://amzn.to/2JVcW9N
Needle File Set
USA: https://amzn.to/2KaxD0m
UK: https://amzn.to/2OHZ3iG
CA: https://amzn.to/2T2B1x9
DeWALT Palm Sander
USA: https://amzn.to/2IoW87R
UK: https://amzn.to/2KEqshP
CA: https://amzn.to/2Mve4mx
Scroll Saw
USA: https://amzn.to/2QaZ53c
UK: https://amzn.to/2ZYjpJG
CA: https://amzn.to/2ZYjpJG
Small Clamps
USA: https://amzn.to/2ZvgD9K
UK: https://amzn.to/2Zpwb2M
CA: https://amzn.to/2ZnE18Z
Black Epoxy Dye
USA: https://amzn.to/2HpArF3
CA: https://amzn.to/2Lbu5ub
Table Top Epoxy 2 Quart Kit
USA: https://amzn.to/2K30N2C
CA: https://amzn.to/2WoiFXs
Table Top Epoxy Gallon Kit
USA: https://amzn.to/2EYoYeF
CA: https://amzn.to/2WuT9Vt
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
UK: https://amzn.to/2KnxrLD
CA: https://amzn.to/2Z4yHaE
Dual-Action Airbrush
USA: https://amzn.to/35Uuafm
UK: https://amzn.to/31zTh3J
CA: https://amzn.to/2W1JJ0b
Vacuum Chamber
USA: https://amzn.to/2VzcsfT
UK: https://amzn.to/2Ko3Jq8
CA: https://amzn.to/2KnfZa7
Vacuum Pump
USA: https://amzn.to/2LKESPm
UK: https://amzn.to/2KoR1ak
CA: https://amzn.to/2QDGyZK
Table Top Epoxy 2 Quart Kit
USA: https://amzn.to/2K30N2C
CA: https://amzn.to/2WoiFXs
Polishing Pads w/Drill Adapter
USA: https://amzn.to/2LTPcE0
UK: https://amzn.to/2MAD6PF
CA: https://amzn.to/2LTD0Dj
Plastic Polish (Meguiars PlastX)
USA: https://amzn.to/2MCKAl4
UK: https://amzn.to/2OzkkuO
CA: https://amzn.to/2MylsfE
Matte Fiber HTPLA Filament
USA: https://amzn.to/2lh5o66
UK: https://amzn.to/2lm2Nbd
CA: https://amzn.to/2jUSBGi
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
Ultimaker 2+ Extended 3D Printer
USA: http://amzn.to/2l4Y0Xb
UK: https://amzn.to/2MqBz0b
CA: https://amzn.to/2Ig1PVG

| Equipment Used |
Canon Powershot G7X
USA: http://amzn.to/2oqPTEu
UK: https://amzn.to/2WCfuQf
CA: https://amzn.to/2WlHc4d
Zoom H1 Recorder
USA: http://amzn.to/2oLSvyQ
UK: https://amzn.to/317y2as
CA: https://amzn.to/2KlfSMt
Lighting Kit
USA: https://amzn.to/2DfaMiG
UK: https://amzn.to/2QPiyDi
CA: https://amzn.to/2IiFcjy

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available on Youtube https://youtu.be/gbGMM-e537s

1 year, 3 months ago

Layer adhesion? WTF is that?! Seriously, I've had problems with it before, but it was never this severe. Half this job ended up falling apart, literally, and the resin won't fully cure, for some reason. I guess I'll have to stick to smaller runs with this stuff. The few models that survived are as follows:

ST-1: https://kajminiatures.com/product/object-701-1/

AMX AC mle 46-100: https://kajminiatures.com/product/amx-ac-mle-46-100/

T-10M: https://kajminiatures.com/product/object-734-272/

The SAU-152M is fictional, which is why I didn't bother to include it. I'm not selling fictional tanks on my website yet.

Links:

Website:
https://kajminiatures.com

Shapeways:
https://www.shapeways.com/designer/steampunkkaja

WordPress Blog:
https://kjworldsong.wordpress.com/

Wargaming 3D:
https://www.wargaming3d.com/vendor/kajminiatures/

Modelling Vehicle History:
https://www.klueser.de/categorylist.php?cat=Modellhersteller&type=Kaja&language=en

Steemit:
https://steemit.com/@steampunkkaja

SubscribeStar:
https://www.subscribestar.com/kaja-blackwing

1 year, 4 months ago

An update with firing of a project I have been working on. Took awhile for the upload to take but just in time for new years.

1 year, 4 months ago

finally settled on the Wades Gearing for my extruder...

1 year, 6 months ago

This dragon hidden storage box design posed some interesting challenges. After struggling for a while I tried first establishing lights and darks with just black and white paint before adding color, and I also switched to airbrushing. The lever which opens the secret compartment was blended into the rest of the scales, and the eyes got a coat of epoxy resin to make them super glossy.

Get the 3D model: https://lindydesignlab.com/product/dragon-secret-compartment-box/

| Supplies |
Wet Palette-Awesome for Acrylics!
USA: https://amzn.to/2oOB3hD
UK: https://amzn.to/2BwNLEe
CA: https://amzn.to/2Mw0u0e
Sap Green Acrylic Paint
USA: https://amzn.to/2MBdMc6
UK: https://amzn.to/31EXHGE
CA: https://amzn.to/33TkgZl
Deep Turquoise Acrylic Paint
USA: https://amzn.to/31xwcP7
UK: https://amzn.to/2VYYBfT
CA: https://amzn.to/2Mzxgxv
Dual-Action Airbrush
USA: https://amzn.to/35Uuafm
UK: https://amzn.to/31zTh3J
CA: https://amzn.to/2W1JJ0b
Matte Fiber HTPLA Filament
USA: https://amzn.to/2lh5o66
UK: https://amzn.to/2lm2Nbd
CA: https://amzn.to/2jUSBGi
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
Ultimaker 2+ Extended 3D Printer
USA: http://amzn.to/2l4Y0Xb
UK: https://amzn.to/2MqBz0b
CA: https://amzn.to/2Ig1PVG

| Equipment Used |
Canon Powershot G7X
USA: http://amzn.to/2oqPTEu
UK: https://amzn.to/2WCfuQf
CA: https://amzn.to/2WlHc4d
Zoom H1 Recorder
USA: http://amzn.to/2oLSvyQ
UK: https://amzn.to/317y2as
CA: https://amzn.to/2KlfSMt
Giant Squid Audio Lab Mic
USA: http://amzn.to/2oTtbZy
CA: https://amzn.to/2JRTPNO
Lighting Kit
USA: https://amzn.to/2DfaMiG
UK: https://amzn.to/2QPiyDi
CA: https://amzn.to/2IiFcjy

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://youtu.be/hzwzikOF068

1 year, 6 months ago

- PayPal Tipjar: https://www.paypal.me/sylranch
- SubscribeStar: https://www.subscribestar.com/sylranch
- Tales From SYL Ranch Merch: https://teespring.com/syl-bitchute
- I'm a Domestic Terrorist Merch: https://teespring.com/syl-dt
- Contribute To Tales From SYL Ranch: http://www.wrstone.com/sylranch/contribute

- 3D Printing a GYROJET, Part 1: https://www.bitchute.com/video/YuiFVt7fXnes/
- 3D Printing a GYROJET, Part 2: https://www.bitchute.com/video/8xfbZ0ECYbIE/

- Tales From SYL Ranch Gyrojet Page: http://www.wrstone.com/sylranch/gyrojet
- The Pirate Bay: https://thepiratebay.org/
- GNU Public License: https://en.wikipedia.org/wiki/GNU_General_Public_License
- LIQUID METAL BULLETS in Slow Motion: https://www.youtube.com/watch?v=dhbWfhBDNzk
- Shooting Watermelons with "Exploding" Sodium Bullets: https://www.youtube.com/watch?v=T85d7ST2yxU

1 year, 8 months ago

Designed a template and cut it out of three sheets of plywood which will be layered together as a base for the dragon secret compartment wall art sculpture. This was my first scroll saw project, so the cutting process didn't go as smoothly as planned.

Get the 3D model: https://lindydesignlab.com/product/dragon-secret-compartment-box/

Part 1 - Designing the Dragon: https://youtu.be/EtlIKFO5qpU
Part 2 - Joining and Smoothing the Dragon: https://youtu.be/Fh8VO_fv3Hk

| Supplies |
Scroll Saw
USA: https://amzn.to/2QaZ53c
UK: https://amzn.to/2ZYjpJG
CA: https://amzn.to/2ZYjpJG
Blades for Scroll Saw
USA: https://amzn.to/2QkPHKy
UK: https://amzn.to/31prJyu
CA: https://amzn.to/301E7Z5
Perma-Grit Sanding Block
USA: https://amzn.to/2LUl634
UK: https://amzn.to/2YjrOGv
CA: https://amzn.to/2GTt0WH
Tungsten Carbide Cutting/Shaping Wheel
USA: https://amzn.to/30LfufW
UK: https://amzn.to/3174GsP
CA: https://amzn.to/2Z3sWdo
Perma-Grit Shaping Tools
USA: https://amzn.to/2ON8dqg
UK: https://amzn.to/31hSxkS
Face Shield
USA: https://amzn.to/2Xz8v7v
UK: https://amzn.to/2JYiQHk
CA: https://amzn.to/2WiIOHm
Diamond Burr Bits
USA: https://amzn.to/2K8KUGE
UK: https://amzn.to/2SXZS5p
CA: https://amzn.to/317k4EC
Needle File Set
USA: https://amzn.to/2KaxD0m
UK: https://amzn.to/2OHZ3iG
CA: https://amzn.to/2T2B1x9
Rotary Tool Accessory Kit
USA: https://amzn.to/2EyW6cr
UK: https://amzn.to/312TXiW
CA: https://amzn.to/2QGYIdb
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
UK: https://amzn.to/2KnxrLD
Dremel Rotary Tool
USA: https://amzn.to/2IxD4CZ
UK: https://amzn.to/2EQfr94
CA: https://amzn.to/2KngMYD
3M Respirator Half Mask
USA: https://amzn.to/2IjbzhZ
UK: https://amzn.to/2JUXn1V
CA: https://amzn.to/2InRUO6

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

Content also available on YouTube: https://youtu.be/uaP8B5OqYE0

1 year, 8 months ago

- PayPal Tipjar: https://www.paypal.me/sylranch
- SubscribeStar: https://www.subscribestar.com/sylranch
- Tales From SYL Ranch Merch: https://teespring.com/syl-bitchute
- I'm a Domestic Terrorist Merch: https://teespring.com/syl-dt
- Contribute To Tales From SYL Ranch: http://www.wrstone.com/sylranch/contribute

- 3D Printing a GYROJET, Part 1: https://www.bitchute.com/video/YuiFVt7fXnes/
- 3D Printing a GYROJET, Part 2: https://www.bitchute.com/video/8xfbZ0ECYbIE/

#SYLRanch #Gyrojet #3DPrinting #2A #2ndAmendment #GunControl #VictimDisarmament

1 year, 8 months ago

This is a dependable method for bonding parts of a large model and removing print lines. Using a dragon as an example, I'll show you how to plastic weld the parts together with a wood burning tool, coat the parts in tinted epoxy resin then sand to remove remaining imperfections.

Get the 3D model: https://lindydesignlab.com/product/dragon-secret-compartment-box/

Part 1 - Designing the Dragon: https://youtu.be/EtlIKFO5qpU

| Supplies |
Wood Burner
http://amzn.to/2mjbaCy
Brush-On Super Glue
https://amzn.to/324d9fX
Best Sandpaper (3M Pro Grade Precision)
https://amzn.to/2WqRHON
Needle File Set
https://amzn.to/2KaxD0m
Diamond Burr Bits
USA: https://amzn.to/2K8KUGE
UK: https://amzn.to/2SXZS5p
CA: https://amzn.to/317k4EC
Perma-Grit Sanding Block
https://amzn.to/2LUl634
Small Clamps
https://amzn.to/2ZvgD9K
Black Epoxy Dye
USA: https://amzn.to/2HpArF3
Table Top Epoxy 2 Quart Kit
USA: https://amzn.to/2K30N2C
CA: https://amzn.to/2WoiFXs
Table Top Epoxy Gallon Kit
https://amzn.to/2EYoYeF
XTC-3D Coating 24 oz. Kit
https://amzn.to/2WuzsNn
Extension Spring (0.028"x0.437"x1.5")
https://amzn.to/2ZhPJGO
#4 Washers
https://amzn.to/2Hr2ILD
Bearings 5x11x4mm
https://amzn.to/2U48APY
#4-40 Machine Screws
https://amzn.to/2zn1zjy
Gel Pens with Compression Springs
https://amzn.to/2ZouIWf
Rotary Tool Accessory Kit
https://amzn.to/2EyW6cr
Dremel Flex Shaft
https://amzn.to/2ElU5O5
Dremel Rotary Tool
https://amzn.to/2IxD4CZ
Matte Fiber HTPLA Filament
https://amzn.to/2lh5o66
AmazonBasics PETG Filament
https://amzn.to/2jSM3Id
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
Ultimaker 2+ Extended 3D Printer
http://amzn.to/2l4Y0Xb

| Equipment Used |
Canon Powershot G7X
http://amzn.to/2oqPTEu
Zoom H1 Recorder
http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic
http://amzn.to/2oTtbZy
Lighting Kit
https://amzn.to/2DfaMiG

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

Content also available at https://youtu.be/Fh8VO_fv3Hk

1 year, 8 months ago

Part 2 of my change to make make printed/craft ammo anyone can make themselves in the comfort of their own home.

1 year, 8 months ago

In this video, I see how you can change the overhangs that are possible without needing support material with some slicer settings changes.

Polymaker Website: http://bit.ly/2YJU0xA
3D Printing in Midair Video: https://www.youtube.com/watch?v=kWE8AzJY8qc
Makefast Workshop Blog: http://bit.ly/2ZzvUHj
Overhang Test STL: http://bit.ly/2Kkqued
My video on PLA support settings: https://www.youtube.com/watch?v=DZavbiV7IwQ

Parts used (affiliate links)
Overture PLA: https://amzn.to/2YKJdnS
CR-10: http://bit.ly/2s09KOU

Background music by Joakim Karud https://soundcloud.com/joakimkarud

Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ

Grab the 2019 Edition of my 3D Printing Failures book: https://amzn.to/2qUhgKY
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY

1 year, 8 months ago

In this video, I check out how fast you can 3D print, and what limitations may be involved in printing fast.

Feel free to comment down below if you have been able to print fast and what tips you may have for everyone else. I will be sure to pin and heart any relevant comments so others can see.

Parts Used (affiliate links)
Bondtech BMG Dual Drive Extruder: http://bit.ly/2sBHYZV
Amazon Basics PLA (which is out of stock, but Overture is very similar): https://amzn.to/2BHPwiW
Overture PLA: https://amzn.to/2YKJdnS
CR-10: http://bit.ly/2s09KOU

3D Files Used:
Benchy: https://www.thingiverse.com/thing:763622
XYZ Cube: https://www.thingiverse.com/thing:1278865
Mysterio: https://www.patreon.com/3DPrintGeneral

Background music by Joakim Karud https://soundcloud.com/joakimkarud

Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ

Grab the 2019 Edition of my 3D Printing Failures book: https://amzn.to/2qUhgKY
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY

1 year, 8 months ago

In this video, I take another look at my most popular video (and most critiqued) from two years ago on how to print with extremely fine nozzles. You can watch that old video here: https://www.youtube.com/watch?v=LHg9phNSCEY

Parts Used (affiliate links):
0.15mm Nozzle: http://bit.ly/2HPuLBy
0.25mm Nozzle: http://bit.ly/2ycFXsr
0.4mm Nozzle: http://bit.ly/2sVY2pw
All other E3D Parts: http://bit.ly/2JFaUen
Bondtech BMG Dual Drive Extruder: http://bit.ly/2sBHYZV
Amazon Basics PLA (which is out of stock, but Overture is very similar): https://amzn.to/2BHPwiW
Overture PLA:https://amzn.to/2YKJdnS
CR-10: http://bit.ly/2s09KOU

Video on my paid CR-10 Upgrades (before switching to a direct extruder) https://www.youtube.com/watch?v=sJdMfjJWZ7g

Blog on the 0.15mm nozzle by E3D: https://goo.gl/QPSH22

3D Files Used:
Benchy: https://www.thingiverse.com/thing:763622
Tank: https://www.thingiverse.com/thing:3115549
Baby Groot: https://www.thingiverse.com/thing:2014307
Mysterio: https://www.patreon.com/3DPrintGeneral
White House: https://www.thingiverse.com/thing:461235
LOTR Ring: https://www.thingiverse.com/thing:3225373

Background music by Joakim Karud https://soundcloud.com/joakimkarud

Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve.
You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ

Grab the 2019 Edition of my 3D Printing Failures book: https://amzn.to/2qUhgKY
Purchase at a discount at my Patreon: http://bit.ly/2xBSDbY

1 year, 8 months ago

I am experimenting with printing ammo for popular calibers and the challenges that brings.

1 year, 8 months ago

This video is a brief introduction to iro3d printer and Selective Powder Deposition (SPD) 3D Printing process.

1 year, 8 months ago

This dragon will keep small items secret and safe. Find and pull the correct scale to dramatically reveal the contents as the lower jaw gapes wide. As part 1 in the series, this video covers the design process, the three basic methods used in Fusion 360 to sculpt the face and construct the mechanism and post-print revisions using the history feature.

| Supplies |
Matte Fiber HTPLA Filament
USA: https://amzn.to/2lh5o66
UK: https://amzn.to/2lm2Nbd
CA: https://amzn.to/2jUSBGi
AmazonBasics PETG Filament
USA: https://amzn.to/2jSM3Id
UK: https://amzn.to/2jQWwEc
CA: https://amzn.to/2lm0yEJ
Ultimaker 2+ Extended 3D Printer
USA: http://amzn.to/2l4Y0Xb
UK: https://amzn.to/2MqBz0b
CA: https://amzn.to/2Ig1PVG
Rotary Tool Accessory Kit
USA: https://amzn.to/2EyW6cr
UK: https://amzn.to/312TXiW
CA: https://amzn.to/2QGYIdb
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
UK: https://amzn.to/2KnxrLD
CA: https://amzn.to/2Z4yHaE
Dremel Rotary Tool
USA: https://amzn.to/2IxD4CZ
UK: https://amzn.to/2EQfr94
CA: https://amzn.to/2KngMYD
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/

| Equipment Used |
Canon Powershot G7X
USA: http://amzn.to/2oqPTEu
UK: https://amzn.to/2WCfuQf
CA: https://amzn.to/2WlHc4d
Zoom H1 Recorder
USA: http://amzn.to/2oLSvyQ
UK: https://amzn.to/317y2as
CA: https://amzn.to/2KlfSMt
Giant Squid Audio Lab Mic
USA: http://amzn.to/2oTtbZy
CA: https://amzn.to/2JRTPNO
Lighting Kit
USA: https://amzn.to/2DfaMiG
UK: https://amzn.to/2QPiyDi
CA: https://amzn.to/2IiFcjy

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://youtu.be/EtlIKFO5qpU

1 year, 10 months ago

Elite Dangerous 3d Printing the Mamba
Link: https://youtu.be/197vHji1coU
A sleek ship in the game but how does that translate to real life when I 3d print the Mamba from elite Dangerous

Like my HUD ? Check out how to do it
++++++++++++++++++++++++++++++
Hud: https://youtu.be/Dz7aPADaxys

Link to the file on Thingiverse
https://www.thingiverse.com/thing:3334711

Wanna Chat?
**************
Join the discussion on Discord https://discord.gg/HRCmDB4

WAYS TO SUPPORT THE CHANNEL
************************************
✔️LIKE THE VIDEO
✔️SUBSCRIBE TO THE CHANNEL
✔️WATCHING THE STREAM

☕Buy me a Kofi☕
☕☕☕☕☕☕☕☕☕☕☕☕☕☕
https://www.Ko-fi.com/ricardosgaming

Affiliate Links:
***************

💰 Get Elite dangerous for £19.99
***********************************
https://click.linksynergy.com/fs-bin/click?id=/xxfns2/XC4&offerid=577354.60&type=3&subid=0

Music: http://www.purple-planet.com

**Miguel Johnson Ambient and Immersive Music**
*****************************************************
https://soundcloud.com/migueljohnsonmjmusic/gaia-beyond-theme/s-JZ1U8

Miguel's new Album The Explorers - Available Now!
****************************************************
https://www.youtube.com/watch?v=dDEFiRZegs4&feature=youtu.be

About Elite: Dangerous
***********************
Elite: Dangerous or Elite 4 is a space adventure, trading, and combat simulation video game developed and published by Frontier Developments played on PC, Mac and Xbox one and is the fourth release in the Elite video game series Piloting a spaceship, the player explores a realistic 1:1 scale open world galaxy based on the real Milky Way, with the gameplay being open-ended.

#elitedangerous #3dprinting #TheMamba cmdr ricardo

1 year, 10 months ago

This is a clip from my Zero Aggression Principle Live Stream. In it, I discuss how 3D printers and quantum entanglment can change what it means to be human!

#3DPrinting #QuantumEntanglement #Human #Change

1 year, 11 months ago

Will table top resin work for filling in print lines and strengthening joints on a 3d printed prop? Instead of pouring a table finish with this clear epoxy resin, I brushed two layers over a complex 3d printed trident to see what kind of results I could get with minimal effort.

Trident by CP3D Printing - Custom 3D Printed Cosplay Weapons and Props
https://www.etsy.com/shop/CP3DPrinting

| Supplies |
Table Top Epoxy 2 Quart Kit
USA: https://amzn.to/2K30N2C
CA: https://amzn.to/2WoiFXs
Table Top Epoxy Gallon Kit
USA: https://amzn.to/2EYoYeF
CA: https://amzn.to/2WuT9Vt
XTC-3D Coating 24 oz. Kit
USA: https://amzn.to/2WuzsNn
UK: https://amzn.to/2K4WUtY
CA: https://amzn.to/2WjQYyV
Embossing Heat Gun
USA: https://amzn.to/2EQ7C3e
DeWALT Palm Sander
USA: https://amzn.to/2IoW87R
UK: https://amzn.to/2KEqshP
CA: https://amzn.to/2Mve4mx
Best Sandpaper
USA: https://amzn.to/2WqRHON
UK: https://amzn.to/2WvNQoL
CA: https://amzn.to/2yvz7f3
Tack Cloth
USA: https://amzn.to/2It9y2F
UK: https://amzn.to/2KApao2
CA: https://amzn.to/2EXcgg2
Cheap but Useful Rotary Tool Accessory Kit
USA: https://amzn.to/2EyW6cr
UK: https://amzn.to/312TXiW
CA: https://amzn.to/2QGYIdb
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
UK: https://amzn.to/2KnxrLD
CA: https://amzn.to/2Z4yHaE
Dremel Rotary Tool
USA: https://amzn.to/2IxD4CZ
UK: https://amzn.to/2EQfr94
CA: https://amzn.to/2KngMYD
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
Ultimaker 2+ Extended 3D Printer
USA: http://amzn.to/2l4Y0Xb
UK: https://amzn.to/2MqBz0b
CA: https://amzn.to/2Ig1PVG

| Equipment Used |
Canon Powershot G7X
USA: http://amzn.to/2oqPTEu
Zoom H1 Recorder
USA: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic
USA: http://amzn.to/2oTtbZy
Lighting Kit
USA: https://amzn.to/2DfaMiG

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

Content also available at https://youtu.be/TyhGxJr_A0Y

1 year, 11 months ago

Building Vincent From the Black Hole 3d Printing the Head (Part 2)
Link: https://youtu.be/cR92oyuvwa0
Starting the build with the top part of VINCENT - the head /helmet. Back in the 1970's I entered a competition to win a studio scale VINCENT. I did not win... as a result I have now embarked on a project to build my own 3d printed studio scale replica of VINCent.

V.I.N.CENT (short for Vital Information Necessary CENTralized) is one of the protagonists and a robot from Disney's 1979 live-action film The Black Hole.

WAYS TO SUPPORT THE CHANNEL
************************************
✔️LIKE THE VIDEO
✔️SUBSCRIBE TO THE CHANNEL
✔️WATCHING THE STREAM
Play List:

⛓️Links:
++++++++++++++++++++++++++++++++++++++++++
The printer: https://www.creality3d.shop/collections/3d-printer/products/

Profiles in history :
https://youtu.be/y-eU2LlOGkA

👍Ricardo's Building Vincent Page:
https://www.facebook.com/groups/2656863547688036/

No copyright infringement intended.
I do not own or claim to own the footage shown in this video.

Walt Disney THE BLACK HOLE Illustrated Graphic Novel Golden Book 1979 Vintage The Black Hole is a 1979 American space opera film directed by Gary Nelson and produced by Walt Disney Productions

"Copyright Disclaimer, Under Section 107 of the Copyright Act 1976, allowance is made for 'fair use' for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favour of fair use

**Miguel Johnson Ambient and Immersive Music**
*****************************************************
https://soundcloud.com/migueljohnsonmjmusic/gaia-beyond-theme/s-JZ1U8

Miguel's new Album The Explorers - Available Now!
****************************************************
https://www.youtube.com/watch?v=dDEFiRZegs4&feature=youtu.be

The 1979 film stars Maximilian Schell, Robert Forster, Joseph Bottoms, Y..

1 year, 11 months ago

Building a Studio Scale VINCENT Disney's The Black Hole
⛓️ Link: https://youtu.be/RRDy62rmahQ
Back in the 1970's I entered a competition to win a studio scale VINCENT. I did not win... as a result I have now embarked on a project to build my own 3d printed studio scale replica of VINCent.

V.I.N.CENT (short for Vital Information Necessary CENTralized) is one of the protagonists and a robot from Disney's 1979 live-action film The Black Hole.

WAYS TO SUPPORT THE CHANNEL
************************************
✔️LIKE THE VIDEO
✔️SUBSCRIBE TO THE CHANNEL
✔️WATCHING THE STREAM
Play List:

⛓️Links:
++++++++++++++++++++++++++++++++++++++++++
the printer: https://www.creality3d.shop/collections/3d-printer/products/

Profiles in history :
https://youtu.be/y-eU2LlOGkA

👍Ricardo's Building Vincent Page:
https://www.facebook.com/groups/2656863547688036/

No copyright infringement intended.
I do not own or claim to own the footage shown in this video.

"Copyright Disclaimer, Under Section 107 of the Copyright Act 1976, allowance is made for 'fair use' for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favour of fair use

**Miguel Johnson Ambient and Immersive Music**
*****************************************************
https://soundcloud.com/migueljohnsonmjmusic/gaia-beyond-theme/s-JZ1U8

Miguel's new Album The Explorers - Available Now!
****************************************************
https://www.youtube.com/watch?v=dDEFiRZegs4&feature=youtu.be

The 1979 film stars Maximilian Schell, Robert Forster, Joseph Bottoms, Yvette Mimieux, Anthony Perkins, and Ernest Borgnine, while the voices of the main robot characters are provided by Roddy McDowall and Slim Pickens (both unbilled). The music for the movie was composed by John Barry

#VincentTheBlackHole #theblackhole #RicardosGaming 3d ..

1 year, 11 months ago

Testing out a vacuum chamber to remove air bubbles from silicone and resin while making a jacket mold using silicone to capture the surface detail and a rigid fiberglass shell in two parts to release the molded object which has undercuts.

| Supplies |
Vacuum Chamber: https://amzn.to/2VzcsfT
Vacuum Pump: https://amzn.to/2LKESPm
PVA Release: https://amzn.to/2W3E38f
Dremel Flex Shaft: https://amzn.to/2ElU5O5
Dremel Rotary Tool: https://amzn.to/2IxD4CZ
Brushable Silicone: https://www.smooth-on.com/product-line/ez-brush/
EZ Lam Resin: https://store.acpsales.com/products/11597/ez-lam-60-minute-epoxy-resin

| Equipment Used |
Canon Powershot G7X: http://amzn.to/2oqPTEu
Zoom H1 Recorder: http://amzn.to/2oLSvyQ
Giant Squid Audio Lab Mic: http://amzn.to/2oTtbZy
Lighting Kit: https://amzn.to/2DfaMiG
Phantom 4 Pro: https://amzn.to/2OFaKSF

The above links are Amazon affiliate links. Lindy Design Lab receives a small commission when you shop through these links at no additional cost to you. Thank you.

More at http://lindydesignlab.com/

Content also available at https://www.youtube.com/watch?v=U2-GXDpqEPo&t=2s

1 year, 12 months ago

Drogon Hatching 3d Print time lapse
Link: https://youtu.be/Rg7s0RoVerI
TEST PRINT : So Game of Thrones fever is spreading like 'wildfire' and one of the first prints I have done is that of the Dragon, Drogon sat in an egg. Print came out great at 0.3 layer height with very few supports

Thingiverse link: https://www.thingiverse.com/thing:3018202

WAYS TO SUPPORT THE CHANNEL
************************************
✔️LIKE THE VIDEO
✔️SUBSCRIBE TO THE CHANNEL
✔️WATCHING THE STREAM

Affiliate Links:
***************

Ab#3dprinting #GoT #DrogontheDragon creality 3d printer

2 years ago

Hey all, in this video we will be looking at a post 1-year review of the Tevo Little Monster Delta 3D Printer. I have gone through some very common issues and have some great solutions to these problems. So I know the video is a bit long but I wanted to give all the information I could because these are issues I see time and time again on the forums.

Parts:

Now MKS Board
https://amzn.to/2CBNhxK

BLTouch Sensor
https://amzn.to/2CzZUcw

Hot End Nozzle Kit
https://amzn.to/2Yoj4eH

Teflon Tube and Quick Fit Kit
https://amzn.to/2WhnvGq

-----------------------------------------------------------------------------------------------------------

Try Amazon Prime 30-Days
https://www.amazon.com/tryprimefree?ref_=assoc_tag_ph_1427739975520&_encoding=UTF8&camp=1789&creative=9325&linkCode=pf4&tag=misperry-20&linkId=3266ea72a7bf7fef009fd902c4fc81f8

Support the Channel and Become a Patron
http://www.patreon.com/misperry

Check out the Channel Store
https://www.tindie.com/stores/misperry/

Checkout the Forum!!
https://groups.google.com/forum/#!forum/misperry

Support the channel tip with bitcoins
Address: 1MvcZHRbDm9czS8s776iutBBPJ39K4PEHh

Follow me on Instructables
http://www.instructables.com/member/misperry

Follow me on Facebook
https://www.facebook.com/misperryee/

Follow me on Twitter
http://www.twitter.com/misperryee

T-Shirts
http://www.zazzle.com/misperry

2 years, 1 month ago

Archived due to historical importance.
YouTube may remove, but the internet never forgets.

defdist.org
defcad.com
ghostgunner.net

2 years, 6 months ago

Subscribe and like!

------Follow me on Instagram!
https://www.instagram.com/chad.d.hodge/

------Use my Affiliate links if you would like to support me!
Amazon: https://amzn.to/2Na05z1
Aliexpress: http://s.click.aliexpress.com/e/cFHJWt2
Gearbest: https://www.gearbest.com/?lkid=14812271

------Check out my Etsy store!
https://www.etsy.com/shop/ChadDeeHodges

------Send me some Bitcoin!
3FAnwqM9JswVpQg23XFtDfnf2CPncTUKzJ

2 years, 8 months ago

What is a engineering student to do with a 3D printer?

2 years, 8 months ago

Timelapse of Yoda Buddha being printed!

More Content on Instagram! https://www.instagram.com/chad.d.hodge/?hl=en

2 years, 8 months ago

A time lapse of baby Groot being printed on the Tevo Tornado

More Content on Instagram! https://www.instagram.com/chad.d.hodge/?hl=en

2 years, 9 months ago

Disclaimer: All works The Truth Sayer Channel are criticism, comment, news reporting, teaching and research.
-All footage taken falls under ''fair use'' of the Digital Millennium Copyright Act (1998). Therefore, no breach of privacy or copyright has been committed.
-FAIR USE STATEMENT
This video may contain copyrighted material the use of which has not been specifically authorized by the copyright owner. This material is being made available within this transformative or derivative work for the purpose of education, commentary and criticism, is being distributed without profit, and is believed to be "fair use" in accordance with Title 17 U.S.C. Section 107

2 years, 9 months ago

I use my 3doodler to draw a new grimoire mini fig.

the star trek 3 doodler is a kick starter project I backed.

Gab: https://gab.ai/3pendragon
Minds: https://www.minds.com/3PenDragon
RB: https://www.redbubble.com/people/tragon?asc=u
DA: https://www.deviantart.com/tridentdragion

Email me about commissions (no licensed characters).
[email protected]

I'll add my rb and pp links, I just need to fix some stuff.

I do some NEET/Weeb stuff, but i'm mostly an art channel; Blender, 3d printing and digital works.

2 years, 9 months ago