Toyota Motor Corporation is a Japanese multinational automotive manufacturer headquartered in Toyota, Aichi, Japan. In 2017, Toyota's corporate structure consisted of 364,445 employees worldwide and, as of December 2019, was the tenth-largest company in the world by revenue. Toyota is the largest automobile manufacturer in Japan, and the second-largest in the world behind Volkswagen, based on 2018 unit sales. Toyota was the world's first automobile manufacturer to produce more than 10 million vehicles per year, which it has done since 2012, when it also reported the production of its 200 millionth vehicle. As of July 2014, Toyota was the largest listed company in Japan by market capitalization and by revenue.
كان ولا يزال سعر #سيارات الشركات الكبرى العالمية في السوق يزيد مع ازدياد #اسعار الخدمة وحتى مع قلت #جودة المركبات، وعلى مر السنين لم يقل تسعيرت منتجات وسائل النقل بأنواعها المختلفة من عربات او دراجات او حتى شاحنات؛ ومع كون وكلاء السيارات في العالم ضمن هذا المشروع الا ان العديد منها ترفع اسعارها بشكل اكبر.
حسابات في بعض منصات التواصل الاجتماعي:
يوتيوب : https://youtube.com/kalsaid
ستيميت : https://steemit.com/@kalsaid
ديتيوب : https://d.tube/c/kalsaid
تويتر : https://twitter.com/KhalidAssaeed
مايندز : https://minds.com/kalsaid
سبسكرايب ستار : https://subscribestar.com/kalsaid
فلوت : https://flote.app/KhalidAssaeed
غاب : https://gab.com/kalsaid
Rubbish automobile manufacturers.
Contact me : [email protected]…com
My bitchute channel : https://www.bitchute.com/channel/prophet_of_nature
🌌 The first 500 people who click the link will get 2 free months of Skillshare Premium: https://skl.sh/jaketran2
💸 Want to support this channel monetarily? The best way to do so is by picking up some of the great products from myself and my amazing partners below.
100% optional, 100% appreciated
📃 (Free) 6 simple resume secrets I used to land my $40/hr remote dream job // http://bit.ly/free-resume-secrets
💹 (Free) Get two free stocks valued up to $1400 when you open a Webull account and deposit any amount // http://bit.ly/webull-jt
📚 Get 3 free audiobooks for life // https://amzn.to/2v58PSu
📜 The exact resume I used to get my $40/hr remote web dev job + a lot of bonuses // http://bit.ly/resume-secrets-now
💻 𝗧𝗵𝗲 𝗟𝗮𝗽𝘁𝗼𝗽 𝗟𝗶𝗳𝗲𝘀𝘁𝘆𝗹𝗲 𝗔𝗰𝗮𝗱𝗲𝗺𝘆:
Learn exactly how I landed my $40/hr work from home dream job ($83k/yr) at 19 years old and how you can go remote without experience or degree
Enroll now // http://bit.ly/LLA-yt
💾 My Editing Software // http://bit.ly/jt-CC
🎥 My video gear, setup, tech, books that changed my life, & more // https://amzn.to/2XZSXhx
📰 Sources & visuals // http://bit.ly/32lwfzp
This is the Czinger 21C. The unique part is that the 21C’s frame is made up of a lattice of 3D printed aluminum nodes connected together with carbon fiber poles. It represents the slow shift from traditional manufacturing to digitizing manufacturing into software
It represents the start of the 3D Printing Industrial Revolution
Meet Relativity Space, a startup cofounded by previous SpaceX and Blue Origin employees, they’re working on bringing 3D printing to disrupt aerospace engineering
Backed by big investors like Mark Cuban and Y Combinator, and partnered with giants like the US Air Force and NASA, they’ve created the world’s largest 3D printer to build rockets
Relativity retrofitted a giant robot arm to feed in aluminum wire and melt it on the spot with a powerful laser
SpaceX have already integrated 3D printing in their Dragon spacecraft via their SuperDraco Engines, in which the combustion chambers are fully 3D printed
Another startup called Launcher has a focus in helping the small satellite market launch more affordably with their 3D printed copper rocket engines
Back in Tabasco, Mexico, 3D printing is also hitting closer to home
Tabasco is home to some of the lowest income families in Mexico. This is the site that the startup, Icon, chose to create the world’s first 3D printed housing community. Thanks to their new Vulcan II concrete home 3d printer. The printer itself can build up to 2,000 sq ft in virtually any floorplan faster, with less waste, and at around half of the cost of traditional homebuilding. Icon’s 3D printed homes aren’t just for people living in absolute poverty
Desktop Metal have created a software that uses algorithms to generate the most efficient, strongest design, using the least amount of material
3D printing has been around for decades now, but it only really started making its way to the mainstream back in 2009. The biggest thing holding 3D printing back is still costs. Traditional mass production as you produce more goods the cost continues to drop - economies of scale. But with 3D printing the price doesn’t go down enough.
As 3D printing gets more affordable, as the printed parts get stronger, it’s gonna start making sense to use for more products
🌅 Join my Facebook Group for going remote // http://bit.ly/remote-job
All materials in these videos are used for educational purposes and fall within the guidelines of fair use. No copyright infringement intended. If you are or represent the copyright owner of materials used in this video and have a problem with the use of said material, please send me an email, [email protected], and we can sort it out.
Copyright © 2020 Jake Tran. All rights reserved.
Leavv - Valley https://chillhop.com/artists/leavv/
j’san - Prom Night ft. nymano
Leavv - Home
Joey Pecoraro - Your Favorite Place https://chillhop.lnk.to/winter2017ID
Axian x J'san - Autumn Leaves
DISCLAIMER: These videos are for entertainment purposes only. This is not meant to be financial advice. Please always do your due diligence and never stop learning. Best of luck!
AFFILIATE DISCLOSURE: Some of the links in this video description are affiliate links, meaning, at no additional cost to you, I may earn a commission if you click through and make a purchase and/or subscribe. I only promote products th
Looking to bring life back to some of your automotive plastic trim without messing around with chemicals? Magic Erasure might be the solution. This tends to work on most non-painted plastic trim, depending on the texture. Roughly textured trims will often destroy the Magic Eraser before it can do its job, but smoother trim seems to work just fine. The secret is simply removing the oxidized surface of the trim so that conditioners and protectants can actually penetrate the plastic. This worked well for the rear trim on my wife's truck.
Elon Musk finally unveiled Tesla’s Model Y SUV on Thursday, March 14th. The vehicle is derived from the Model 3, with about 75% of the components being the same. The car can go from 0-60 in 3.5 seconds, with the standard model having a range of 300 miles. The SUV will start at $39,000, with the long-range model costing $47,000. With the Model Y, Musk completes his plan to have the Tesla models spell “S-E-X-Y.”
MORE TESLA CONTENT:
Tesla Unveiled Its Model Y: Here Are The Best Features Of The $39,000 SUV
How Tesla's Model Y SUV Is Different From The Model X And Model 3
#Tesla #ElonMusk #TechInsider
Tech Insider tells you all you need to know about tech: gadgets, how-to's, gaming, science, digital culture, and more.
Subscribe to our channel and visit us at: http://www.businessinsider.com/sai
TI on Facebook: https://www.facebook.com/techinsider
TI on Instagram: https://www.instagram.com/tech_insider/
TI on Twitter: https://twitter.com/techinsider
TI on Amazon Prime: http://read.bi/PrimeVideo
INSIDER on Snapchat: https://insder.co/2KJLtVo
Watch Elon Musk Unveil The Tesla Model Y SUV
Get Bitcoin for shopping, no extra Charge.
As America’s hydrogen fueling infrastructure begins to blossom, Toyota's first-ever Mirai fuel-cell vehicle (FCV) offers a promising look into the future of transportation.
For the latest Toyota Mirai and information:
Kelley Blue Book is your source for new car reviews, auto show coverage, features, and comparison tests. Subscribe to catch all the latest Kelley Blue Book videos. http://www.youtube.com/subscription_c...
To follow Micah Muzio on Twitter, please visit: http://www.twitter.com/micahmuzio
Video repost from WEF. A Chinese competitor is gaining attention in China. His company created a brand new electric car looking like Tesla's Model X. The Chinese company used also a lot of Tesla Open Source patent to create this brand new car.
The Riversimple Urban Car is a conceptual open source hydrogen fuel cell vehicle that was proposed by Hugo Spowers' company, Riversimple, in 2009. Their latest model, the Rasa, was unveiled on 17 February 2016.
A working prototype vehicle was unveiled at the Somerset House in London on 16 June 2009, and as of 2009, with production initially planned to begin by 2013. The plan has been subsequently superseded with the intention to develop a production vehicle of a similar format but with a new design in 2018-19.
See Open Motors project here
www.local-motors.com involves the community to design and vote on the cars they will build. It's open source auto manufacturing. I love the unique business model Local Motors is using, and wanted to participate. Since I have zero designing skills, I'll call this an open source commercial for them.
Hope it helps guys.
Music for this video is by Kevin Macleod, check out www.imcompetech.com
See this project here
Let there be light
EDAG presents its powerful innovation Light Car - Open Source at the 79th Geneva Motor Show
EDAG, worldwide provider of engineering services, will be presenting the world premiere of its vision of an environment-friendly, future-orientated vehicle for everyday and leisure use at this year's International Motor Show in Geneva.
For the body concept of the Light Car - Open Source, EDAG has broken new ground, and for the first time ever in automotive engineering, used ASA.TEC's innovative basalt fibre, a lightweight, stable and - above all - 100% recyclable material. Propulsion is taken care of by intelligent, electric drive systems in the wheels, which not only feature a high degree of efficiency to get the power of the lithium-ion batteries onto the road, but will also provide considerably greater creative scope for the vehicle package. In addition, with its innovative light concept, the "Light Car - Open Source" will be one of the first vehicles to utilise (O)LED technology as an individually adaptable design and communication element.
TABBY EVO is a hardware open source platform for electric vehicles. Free to use, available to everyone.
It’s the 2nd version of our platform: now it’s harder, better, faster and stronger.
It is an open source framework for the creation of vehicles: it can be used to bootstrap businesses (electric vehicle startups), to create your own vehicle, for education purposes, and much more.
By using it you can save a lot of millions of dollars and years of R&D.
All the plans and blueprints can be downloaded in the website’s download section. You are welcome and encouraged to improve the designs, work on them, and upload them to share your ideas with the community through the OSV forum.
Fawcett Motors Classic Automobile Restoration Whitby Ontario Canada