#barber

Again with this video, I was working on the camera angles and using the tripod on the wheels. I'm using the 1.2mm blade on the Andis clippers.

3 months ago

This haircut is disconnected on both sides but blended at the back, at the time of making this video I was experimenting on cameras and angles and ways of holding the camera to get the best look to learn from, I wanted to try and give the viewer the same angle as I have.

3 months ago

I have broken down the full-length haircut into 6 sections so anyone can concentrate on the part they need at the time. This is part 3 Removing the weight after the setting the grade length. I find that taking out this bulk area and connecting to the top makes the haircut so much easier and quicker too. After taking out the weight you can easily see the shape when cutting the top and you'll know your sections are at the right angle to connect the haircut.

3 months ago

I have broken down the full-length haircut into 6 sections so anyone can concentrate on the part they need at the time. This is part 5 scissor work cutting the top. It's important to keep the sections close together here. In this video you will see we take 10-12 sections from the fringe to the crown in the centre of the head and 12-16 on each side. This is so we connect all the sections together, reduce the possibility of section lines and save time on cross-checking the haircut. Having said that I would recommend cross-checking every cut until your confident with this cutting technique.

3 months ago

I have broken down the full-length haircut into 6 sections so anyone can concentrate on the part they need at the time. This is part 6 finishing the haircut, connecting the top to the sides. This video also shows some of the styles that can be created from this cut.

3 months ago

I have broken down the full-length haircut into 6 sections so anyone can concentrate on the part they need at the time. This is part 2 Clipper work. In this video I use the Andis clippers to set the length of the hair on the back and sides, I'm using a great 2 or 6mm clipper blade. I find these blades better than the plastic guards as they have more teeth and pick up more hair, this reduces the section lines you can get from most plastic guards, it also means the clipper work is quicker as your not going over the same part again and again.

3 months, 2 weeks ago

I have broken down the full-length haircut into 6 sections so anyone can concentrate on the part they need at the time. This is part 4 The hairline

3 months, 2 weeks ago

This video was shot in 2013 on an iPhone 5. Here I'm trying to show how following a routine with every cut (stages) can help you start and finish each part to create a perfect haircut. Although this video is for beginners it has also been helpful to many Barbers over the years it's been on youtube. I hope it can help here too.

3 months, 2 weeks ago

I have broken down the full-length haircut into 6 sections so anyone can concentrate on the part they need at the time. This is part 1, putting the gown properly on a client. OK so this could be the most uninteresting part of this set but it's still important to get it right and I've seen many barbers not have the right tension on the neck area and send hair right down the client's neck. Not good for business. Sometimes it's the little things that really make the visit special.

3 months, 2 weeks ago

Traditional Flat top sides down to 0.01mm with the Andis Excel 2 speed and outliner blade. This video was shot in 2012.

3 months, 3 weeks ago

The barber hauler is a simple line attached to the jib clew or the jib sheet, which serves to pull the clew in a certain direction with the purpose of improving the jib position and shape. On my boat I use a barber hauler when sailing downwind to pull the clew down and out, and this helps me achieve a better jib shape, with less twist and more power.

4 months ago

Don't disrespect your barber. There are consequences.

12 months ago

Das Adagio für Streicher ist ein Werk von Samuel Barber, wohl sein bekanntestes, arrangiert für Streichorchester aus dem zweiten Satz seines Streichquartetts op. 11.

Barber beendete die Bearbeitung 1936, im selben Jahr, in dem er das Quartett schrieb. Es wurde am 5. November 1938 von Arturo Toscanini unter der Leitung des NBC Symphony Orchestra in einer Radiosendung aus dem NBC Studio 8H zum ersten Mal aufgeführt. Toscanini spielte das Stück auch auf seiner Südamerika-Tournee mit dem NBC Symphony Orchestra im Jahr 1940.

Die Aufnahme war im Allgemeinen positiv, wobei Alexander J. Morin schrieb, dass das Adagio für Streicher "voller Pathos und kathartischer Leidenschaft" ist und "selten ein trockenes Auge hinterlässt"[2] Die Musik ist die Vertonung von Barbers Chor-Arrangement von Agnus Dei aus dem Jahr 1967. Das Adagio für Streicher wurde in vielen Fernsehsendungen und Filmen gezeigt...
https://en.wikipedia.org/wiki/Adagio_for_Strings
Übersetzt mit www.DeepL.com/Translator (kostenlose Version)

"Das traurigste Lied"

Das "Adagio für Streicher" war Berichten zufolge eines der Lieblingsmusikstücke von Präsident John F. Kennedy.

Im November 1963, am Montag nach der Ermordung des JFK, ließ Jackie Kennedy das National Symphony Orchestra das Stück zu seinen Ehren in einem landesweit ausgestrahlten Radiokonzert aufführen.

In den letzten Jahren hat "Adagio" mehr Beachtung gefunden, da viele Filmgänger von dem Stück zu Tränen gerührt waren, das als kraftvolle Tonspur in Produktionen wie dieser verwendet wurde: David Lynchs "Elephant Man" von 1980, Gregory Navas "El Norte" von 1983, Oliver Stones "Platoon" von 1986 und George Millers "Lorenzo's Oil" von 1992...

https://www.pophistorydig.com/topics/tag/jfk-adagio-for-strings/

Übersetzt mit www.DeepL.com/Translator (kostenlose Version)

1 year, 1 month ago