Inside the Shed

Starting to fit out and build things to go inside the shed also start to move my tools in. Mainly tool stands and benches at the moment but more to come. Still need to get power connected and some other bits and bobs like data and water but hopefully will get to that over the next few weeks. So another film of me jumping about all over the place. Enjoy.
Quantum 2002
Music
Dansong.
http://www.danosongs.com/

So the second installment of Inside the Shed, it’s been a bit long due to life getting in the way lol.
So slowly getting through it all just sorting stuff out inside the shed, finishing off the windows and securing, In preparation of moving the 3D printers, computer and stuff in so I can get back to making silly useless things, like the Storm Trooper helm.
So I might have a go at doing a how to video, we will see how it goes.
So hope you enjoy if you do hit the like and subscribe for more.

So another exciting film of me working in the shed :). This video is a mix of time-lapse and video that has been sped up, as I realized that the things I am doing are quicker now, so time lapse was missing a lot of what I was doing. I hope that the next couple of videos will be last of me building and sorting stuff out and I can get back to playing with my electronics and get around to re building my quad copter and doing some 3D printing.
Anyway still a lot to do around the garden and shed that I need to get finished soon as the reason for building was to get all my TOYS out of the house so we can remodel the downstairs and finish the refurb upstairs as we had run out of room to move stuff around.
So hope you enjoy please like or subscribe to see more.

So another video, this is just me sorting out stuff and fixing my 3D printer and putting in a sound system in the shed. Soon the weather will get better and I can finish all the stuff out side and then I think thats pretty much it, the shed will be finished and I can get back to some of the other projects around the house I have neglected while I built the shed. Since doing this video the PC I built has died, I knew it had issues as I had already disabled one core on the CPU to keep it working but i guess more have failed so I will have to build another one at some point. I am now using a windows XP laptop that is soooooo slow lol. well hope you enjoy, hit that like button if you do.

So I need somewhere just for the printers. They are a bit loud next to me when on the computer and the new printer will not fit on the desk. This is just a video of me making a shelved unit to put the printers on and store the miscellaneous things that go along with them like filament and some other stuff. There are also some old pictures of the fitted kitchen I built for the house.
Thanks for watching
hope you enjoy, if you did please like or Subscribe for more.

Music:
Parachute Music
https:\www.parachutemusic.com

Tracks:
Perth one
Perth two

Spool Holder:
Thingiverse
https://www.thingiverse.com
Item:
SPANNERHANDS Spool System Wall Mounted Spool Holder & Dust Cover
https://www.thingiverse.com/thing:2119644
SPANNERHANDS Profile
https://www.thingiverse.com/SpannerHands/about

So I finally got around to making a bench-top power supply for the shed. Just using a computer PSU and some parts I have picked up for it. Just a time-lapse of me making the box and fitting / soldering all the parts. Hope you enjoy and I will show more of it being used in other videos.

Music:
Dano Songs
www.danosongs.com

Great World Techno
Im Gonna Go
Deep Ocean

Parts and Links :

LCD converter Adjustable Voltage meter Regulator DP50V5A Programmable Power Supply Module Buck Voltmeter Ammeter

https://www.aliexpress.com/item/LCD-converter-Adjustable-Voltage-meter-Regulator-DP50V5A-Programmable-Power-Supply-Module-Buck-Voltmeter-Ammeter-Current-tester/32654445678.html?spm=a2g0s.9042311.0.0.6nWf6B

Red DC 0-100V/10A Digital Current Voltage Monitor DC Voltmeter Ammeter Amperemeter Volt Meter Car Battery Tester

https://www.aliexpress.com/item/DC-0-100V-2A-Red-LED-Digital-DC-voltmeter-ammeter-Volt-Amp-Panel-Meter-voltage-ampere/32426981256.html?spm=a2g0s.9042311.0.0.6nWf6B

DC-DC Step Up Down Boost buck Voltage Converter Module LM2577S LM2596S Power

https://www.aliexpress.com/item/DC-DC-Step-Up-Down-Boost-buck-Voltage-Converter-Module-LM2577S-LM2596S-Power/32592974090.html?spm=a2g0s.9042311.0.0.6nWf6B

So the first part of making and installing a dust extraction system in the shed, this is just putting together a cyclone I printed in several parts (see below for cyclone link) and testing. Then fixing some issues I had with parts I used. Also my largest print on the Tevo Tornado so far diameter size. Still love the Tornado just prints everything I throw at it time after time. Hope you enjoy.

Music:
Bensound - https://www.bensound.com/royalty-free
Songs:
Tenderness
Energy
Piano Moment

Thingiverse Part:
Captain_3d
Cyclone Dust Seperator
https://www.thingiverse.com/thing:210...

So I have a load of ply wood cut offs from all the shelving and stuff I have been doing so thought I would try and make something from them. So I decided to make a workbench that I could use for building stuff on and working on 3D prints and stuff. So a time lapse of me making and spraying the workbench. Sorry for the flickering on the first part but have finally sorted so should not happen anymore. Anyway hope you enjoy hit the like if you do or the SUBSCRIBE to see more.

So time to start putting in some storage under the printer benches so I can continue to sort and finish the workshop, Though it does seem like I have too much stuff and need to have a decent sort out and throw out a lot of things I have stored like 250gig HD’s and old power supplies. Anyway hope you enjoy and please hit the like if you do or Subscribe for more. Thanks for watching.

Time to sort the room for the 3D printers; it’s a mess. No lights, full of rubbish and it’s hard to film in such a small room. I am trying to save money so I am recycling a lot of wood and other stuff that I kept after finishing the shed and the last house, the materials I am buying are either recycled or seconds from a great second-hand builders yard in Whangarei and it’s a lot cheaper and it’s just a room for printers. I am also having some random issues with the LED lights and the shutter speed on the cameras, sometimes it causes stripping / flickering and then others it does not, so sorry for any bits of film that are well rough. I will do some testing once I have time. So now I can set my printers back up and get some prints going, I have a lot I want to do. Hope you enjoy.

So bit of a mix as we are having a new hot water tank installed and also having it moved under the house. I have finally made a start on framing out the garage area for a computer room. Part of the problem is organising all my stuff so I can make space to do all the jobs that need doing. This is Episode 2 of the workshop as the printer room was meant to be Episode 1 and I titled it wrong. Still a load more work to do and we have started to make plans on what we are going to do with the gardens like outdoor areas, sheds and veggie patch. So hope you enjoy, Subscribe for more and a like would be great.

So I bought another 3D printer. This is Two Trees Sapphire S Core XY printer. This just means the bed goes up and down and the X and Y axis move. It uses a Lerdge X Control board and the printer comes 75% built with all electronics installed etc. You just need to put the frame together and wire. This is just a time-lapse of me putting it together and showing some test prints I did to see if the settings are OK. So far really impressed with the printer but I messed with the profile I made in Simplify 3D and need to look at it as all my prints are falling now lol. So hope you enjoy Subscribe for more and hit the Like button if you enjoyed and any comments are appreciated.

So lock down has given me time to test and print some 3D time-lapse as it can take a while so here are a few of my first tests:

01:20 Moon - https://www.thingiverse.com/thing:2771919/files
01:40 Pikachu - https://www.thingiverse.com/thing:376601
02:05 Big Pikachu - https://www.thingiverse.com/thing:376601 (scaled)
03:13 My Head – Me done by ME lol
04:33 Han Solo in Carbonite (Finished Model) made up from several STL’s available on the web

So hope you enjoy, SUBSCRIBE for more or hit LIKE if you enjoyed. Thanks for watching.

So I decided I would like to Time-lapse 3D prints but that takes some electronics and some Gcode to make the printer move the print head out of the way so a photo can be taken of the print morphing out of the print bed. So this is a video of me having a go at making a time-lapse rig for my Tevo Tornado printer. I am using a hall sensor and a relay connected to an Arduino Nano to fire the camera shutter. I have had to print some parts write some code and Gcode to make this work but the results at the end are pretty good so I will improve it and do some time lapse prints. Oh I am talking through the whole video sorry lol. Thanks for watching subscribe to see more or like if you enjoyed.Links to prints and parts.Ender 3 time-lapse rig - Devin Monteshttps://www.myminifactory.com/object/3d-print-timelapse-rig-ender-3-and-similar-printers-74180Han Solo in Carbonite - Hidden Box and Bookend - by WeeksBhttps://www.thingiverse.com/thing:3298819Twisted Heart Vase – by Gyrobothttps://www.thingiverse.com/thing:42570thingiverse websitehttps://www.thingiverse.com/