Winlink on a Raspberry Pi Part 4

In this video, we configure shortcuts for Pat, setup a connection to Mesh Post Offices, and configure Pat to autostart at boot.

Link to 1st video in the series - https://youtu.be/UdpKZ4SZli8

setting up aliases examples
"KX4Z-40M": "ardop:///kx4z?freq=7102",
"W4CAT-PO": "telnet://w4cat:[email protected]:8772/wl2k"

setting up autostart in rc.local example
rigctld -m 122 -r /dev/ttyUSB0 -s 4800 &
sleep 2
su pi -c '/home/pi/ardop/./piardopc 8515 plughw:1,0 plughw:1,0 &'
sleep 2
su pi -c 'pat http'

Installing Pat Winlink - https://youtu.be/UdpKZ4SZli8
Installing Rig Control - https://youtu.be/8yxwN1lOtNs
Installing ARDOP - https://youtu.be/w0dy42TLd_o
ARDOP download for RPi - http://www.cantab.net/users/john.wiseman/Downloads/Beta/
Pat Download Page - https://github.com/la5nta/pat/releases
Raspberry Pi Image Download - https://www.raspberrypi.org/downloads/raspbian/
Raspberry Pi Kit - https://amzn.to/2vKjPCg
32gb Micro SD card - https://amzn.to/2KVrEtx
Leave a tip - https://paypal.me/km4ack
Winlink - http://winlink.org

73,
KM4ACK