How to make a Carbine Crossbow Part 2 : Designs, Materials, Tools

Design / Template Link - https://goo.gl/kVLqoA
Materials List :
Wood: 16mm x 46cm x 8.3cm (3 planks or similar size sheet)
Aluminium Plate: 10mm - 12mm x 4cm x 8cm at least
Aluminium Plate: 8mm - 12mm x 7cm x 6cm
Steel Plate: 1mm - 2mm x 6cm x 12cm (2 plates)
Various Washers x 10 or more
Nails 2 x 10cm x 4mm
Various Screws 15mm - 30mm x 20 or more
Bolts: 26mm x 3mm (6 or more)
Wood: 5mm x 46cm x 8.3cm (same size as stock wood)
Extension Spring: 10mm Long
Wire: 1mm x 10cm
L Brackets x 6 or more
Bolts: 8mm x 65mm x 2
Nails: 26mm x 3mm x 6 or more
L Section Alu: 10mm - 15mm x 53cm or more
Hinge and Hock Latch
Eye Bolts: 2 x 15mm - 20mm
Aluminium plate: 2mm -3mm x 20cm x 20cm
Aluminium plate: 5mm x 15cm x 4.5cm or more
Fibreglass Tent Poles - 8 sections (Link here - )
Paracord / Bowstring etc
Aluminium tubes / Poles: 15mm - 20mm x 30cm

Tools List : Drill, and drill bits, Hammer, Screwdrivers, Hand Saw, Hack Saw, Files, Work Bench, Vice, Sandpaper, Nail Punch, Pliers, Tape Measure, Pencil, Scissors, Wood Glue, Double Sided Tape, Varnish, Rivet Gun and Rivets, Safety Gear and maybe a few other thing.......

PATREON - https://www.patreon.com/WeaponCollector
BLOG - http://weaponcollector.blogspot.co.uk/
FACEBOOK - https://www.facebook.com/weaponcollector1/
TWITTER - https://twitter.com/WeaponCollector

Don't forget to Like, Comment, Share or Subscribe!
And click the Bell if you want notifications.

If you would like to support this channel and you buy from Gearbest or U.S Amazon please use these links below to visit those websites and for each purchase I will get 7% - 10% of what you spend and at no expense to you either.

Shop At GEARBEST - https://goo.gl/FapdG5

Shop At AMAZON - http://amzn.to/2s7RWQT

TAGS:
#weaponcollector #weapons #weaponcollection #selfdefence #ukselfdefence #brassknuckles #knuckledusters
#knives #guns #crossbows #survival #weaponcollection #howtomake #firearms #WeaponCollector #weapon #collector #weapons