How to Join and Smooth 3D Printed Parts for a Dragon Secret Compartment Box
This is a dependable method for bonding parts of a large model and removing print lines. Using a dragon as an example, I'll show you how to plastic weld the parts together with a wood burning tool, coat the parts in tinted epoxy resin then sand to remove remaining imperfections.
Get the 3D model: https://lindydesignlab.com/product/dragon-secret-compartment-box/
Part 1 - Designing the Dragon: https://youtu.be/EtlIKFO5qpU
| Supplies |
Brush-On Super Glue
Best Sandpaper (3M Pro Grade Precision)
Needle File Set
Diamond Burr Bits
Perma-Grit Sanding Block
Black Epoxy Dye
Table Top Epoxy 2 Quart Kit
Table Top Epoxy Gallon Kit
XTC-3D Coating 24 oz. Kit
Extension Spring (0.028"x0.437"x1.5")
#4-40 Machine Screws
Gel Pens with Compression Springs
Rotary Tool Accessory Kit
Dremel Flex Shaft
Dremel Rotary Tool
Matte Fiber HTPLA Filament
AmazonBasics PETG Filament
PrintBite 3D Printing Surface: https://flex3drive.com/printbite/
Ultimaker 2+ Extended 3D Printer
The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.
Content also available at https://youtu.be/Fh8VO_fv3Hk
|Category||DIY & Gardening|
|Sensitivity||Normal - Content that is suitable for ages 16 and over|
1 week, 3 days ago
Warning - This video exceeds your sensitivity preference!
To dismiss this warning and continue to watch the video please click on the button below.
Note - Autoplay has been disabled for this video.
This advertisement has been selected by the BitChute platform.
By purchasing and/or using the linked product you are helping to cover the costs of running BitChute. Without the support of the community this platform will cease to exist.
Registered users can opt-out of receiving advertising via the Interface tab on their Settings page.
To help support BitChute, place an advert on BitChute or find out more about our creator monetization policy: