Crankshaft Position Sensor Replacement 5.2L V8

Replace your vehicle’s Crankshaft Position Sensor yourself and save some money!

NOTE:
Replacing this sensor solved the idle and revving issue I had for years.

LINKS:
Crankshaft Position Sensor: https://www.amazon.com/dp/B001KQQYJ4/ref=cm_sw_em_r_mt_dp_0FVSFJX4ZRPRB9DB2XTP
Enjoy my videos? Become a patron!: https://www.patreon.com/EndlessMoneyPits

TOOLS USED:
• A socket wrench
• 9-inch extension
• 10mm socket
• 13mm socket
• PB Blaster Penetrant
• Zip Ties
• Bungee Cord
• Safety glasses
• A stool to stand on
• Creeper
• Shop light
To reach the crankshaft sensor I used:
• A socket wrench
• 9-inch socket extension
• 2 6-inch socket extensions
• U-Joint socket adapter
• 2-inch socket extension
• 1/4" inch Hex Socket

**Disclaimer**
Due to the litigious world we live in, I have to make this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.