You are about to action:

Object being modified by the action

Do you want to proceed?

Share Video Link

https://www.bitchute.com/video/ekq4nxaMbRK7/

Embed Video HTML

Request Moderation

Reason

Please select the most appropriate reason from the list provided.

Note: For more detailed descriptions of each reason, please see our Community Guidelines.

Additional Comments

Please add any additonal comments that will help with the assessment of your moderation report request.

Note: Copyright claims must contain the items specified within the Copyright Policy.

Thank you for submitting your moderation report

We will investigate and notify you of the outcome. Please monitor the mailbox associated with your account, in case we request additional information.

Add to Playlist

Tolchin/Shipov Bench Test #1

Watch

Next video playing soon

Click to cancel

Autoplay has been paused

Click to watch next video

First published at 21:39 UTC on February 3rd, 2021.

#tolchin
#shipov

Grassroots Mechanic Movement

Stclairtech

subscribers

This is a Tolchin/Shipov test setup, being built to measure some of the effects of this drive vs the PIE system. I am not abandoning the PIE project, rather I would like to see if additional tech such as the Tolchin/Shipov 4-D Gyro setup could enhance the PIE configuration. This id the first test run with an SDC controller (from the PIE) installed. I think the micro switch should probably be held down a bit longer, but overall, I am pleased with the test rig. I will be refining the build a bit before testing on wheels and testing it as an anti-reversion device for the PIE. For anyone interested, the swinging weights measure .580Kg each for a combined weight of 1.16Kg and are made from 1” round stock with a small center hole (about 5MM). The drive shafts are all 8mm plain rod and the drill was an obsolete 12V B&D 3/8” cordless.

LESS