Click to copy, then share by pasting into your messages, comments, social media posts and websites.
Click to copy, then add into your webpages so users can view and engage with this video from your site.
Report Content
We also accept reports via email. Please see the Guidelines Enforcement Process for instructions on how to make a request via email.
Thank you for submitting your report
We will investigate and take the appropriate action.
How To Cut Metal Roofing Dormers
How to measure and adjust metal roofing for the angles
⏱️⏱️Chapters⏱️⏱️
00:00 Follow along with a handyman
00:25 Mark your valley
00:35 You need to know what your bottom of the valley is
00:56 Take tape measure where your angle will start
01:40 Usually have a small cut off piece, want to use the factory cut off edge
02:15 Find where outside corner hits on that line
03:05 Be an American, not an American't
🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: [email protected]
➤ Follow https://straightarrowrepair.com/pipf
➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf
➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair
#metalroofing #metalroof #metalroofvalley
Transcript:
Hi, I'm Phil Bridges, owner of Straight Arrow Repair. Ever want to know how a repairman fixes things? Well come with me, and I'll show you how I solve problems. Let's make things better together.
And we've made our mark on, on our valley, which it has that ribbon that's in there to make it a valley. And then we go, I need to know what the bottom is.
So I'm going to put a 4 foot level across here. And where that intersection is, is right about a quarter inch, three-eighths of an inch, maybe a half right there. Okay. So then I can take a tape measure.
It's really steep. All right.
Got everything locked in, so don't fall off. Now we're going to measure from this side of because remember, we're lapping and then that half inch from looks about 15. All right. So now we know the bottom is going to go over 15 inches and that's where our angles are going to start. And I'll take you with me now.
I usually have small cut off piece so I can get and I want to use the factory square edge, and what we're going to do is find out where this corner, the outside corner hits on that line and we're going to slide it up with this sitting, you know, solid on that rib to find that square. Just another reason why it's important to be as square as possible.
See how I'm coming down to this four inch mark right here. Right there. And I'm sitting square on that. And then I'm going to mark right there.
Remember, we move from this bottom edge where we're going to lap to, to this mark is how much I got to go up on that side. 28 and a half can remember we were 15 across and then we're going to go 28 and a half up to get our angles. So let's go down there and do that.
This is Phil Bridges, if you like what you saw and think it might be helpful to somebody else, push that like button and let other people know what you and I know, and we'll work together toward making a brighter future. By the way, we're not Amera-Can'ts, we're Americans.
Category | DIY & Gardening |
Sensitivity | Normal - Content that is suitable for ages 16 and over |
Playing Next
Related Videos
Flooring Options What He Recommends
1 day, 3 hours ago
2 days, 6 hours ago
4 days, 1 hour ago
Water Level Colored Water #Shorts
5 days, 20 hours ago
Trafficmaster Laminate Flooring Reviews
6 days, 20 hours ago
Releveling Mobile Home Tricks #Shorts
1 week ago
Warning - This video exceeds your sensitivity preference!
To dismiss this warning and continue to watch the video please click on the button below.
Note - Autoplay has been disabled for this video.