We are using an old soda fridge that wasn't working to convert into a massive cabinet incubator. Ordered the IncuKit basic from IncubatorWarehouse.com.
This is the first in a series of videos, showing exactly how we converted it.
⏱️⏱️Chapters⏱️⏱️
00:00 Intro
00:22 Using a hole saw
00:32 Want to go below the inside of the top of the fridge
01:25 Side slots are to pull the stuff out
02:00 Here's the hole
02:25 He decided to do the vents on the same side away from the heaters
03:32 Changing angles
04:00 What you can use
04:20 We're using 2 wide-mouth canning lids
05:35 Installing the bottom vent cover
06:00 Now we have vents, controls, and will be adding more shelves
06:55 Follow us
🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: [email protected]
➤ Follow https://straightarrowrepair.com/pipf
➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf
➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair
We're using the Customize IncuKit™ XL for Cabinet Incubators at https://incubatorwarehouse.com/incukit-xl.html
You can find the additional thermometers and hydrometers: https://amzn.to/3R3BqfI along with other things I have for my chickens.
#DIYincubator #cabinetincubator #incubator
Transcript:
This is what's called a hole saw. And this particular one's like an inch and a half. This is about where this gets below the cover upstairs and past the rack.
"Is that catching fire?"
It is hot.
"Woooh. Okay. Sorry I had to say that because I can see the smoke."
These slots on the sides. Is how you pry it out. But it fell out in that case.
Let them see.
"Well, let them see. I can barely see. I'm not as tall as our regular cameraman either, so he's trying to. Wow. Who knew? That's kinda cool."
Normally, you have to pry it out. I may have to go get a fresh battery. That's why I leave these old ones at the house, the old drills, the old stuff, because they're not up to standard for the work I do outside of.
"Yeah, but you're an American."
I do it by hand. If I had to. All right.
"Wow."
All right. You can use just about anything. It doesn't have to be round to cover that. You can actually use tape. From what we can tell, it doesn't require very much. But she happened to have these canning lids that she was using. So we're going to use those and.
"Yeah."
I don't know if I like that. It says it's sure tight, but it sure don't feel tight to me.
"OK, I'm going to move where I can see. There we go. And then he's doing the bottom one because I'm short."
All you got to do is, if they get loose. You can tighten up. There we go. There's the vents. Ta da. Now we have vents, and we have control
