2019 Cooks AE-34P Diesel Board Edger
34hp Perkins Diesel
4" thick x 34" wide capacity
Only 1.5 hours run time

For more information give us a call at 1-800-473-4804 or visit us online at www.cookssaw.com

In this video Robert shows just how thin of a board a portable sawmill is capable of sawing.
He is using the Cooks MP-32 Portable sawmill using a Cook's 1-1/4" x .042" x 7/8" Super Sharp blade.

MP-32 Portable Sawmills and Packages - https://cookssaw.com/sawmills/mp-32-sawmill/

For more information visit us online at www.cookssaw.com

In this video Robert explains how to change your portable sawmill or resaw over to a different width blade.
Standard Roller guides - https://cookssaw.com/standard-roller-guides/
Standard Retrofit Kits - https://cookssaw.com/standard-complete-retrofit/
Mega Roller guides - https://cookssaw.com/mega-roller-guides/
Mega Retrofit Kits - https://cookssaw.com/mega-retrofit-no-jaw/

For more information visit us online at www.cookssaw.com or call us toll free at 1-800-473-4804

In this series we'll go over all the different aspects of sawmill bandsaw blade tooth set and how it affects sawing performance.

Free Shipping on Setters https://cookssaw.com/sharpeners-and-setters/setters/

To order bandsaw blades for your sawmill or resaw, visit us online at www.cookssaw.com or call us at 1-800-473-4804

In this video Robert gets an MP32 sawmill setup, adjusted, tested, and ready for a customer to pickup.
Blade Alignment Tool - https://cookssaw.com/blade-alignment-tool/
MP32 Portable Sawmill - https://cookssaw.com/sawmills/mp-32-sawmill/

Website: www.cookssaw.com
Email: [email protected]
Phone: 1-800-473-4804

In this series we'll go over all the different aspects of sawmill bandsaw blade tooth set and how it affects sawing performance.

To order bandsaw blades for your sawmill or resaw, visit us online at www.cookssaw.com or call us at 1-800-473-4804

If you have sawmill bandsaw blades in need of sharpening and setting we can help.
We can service any length 1-1/4" - 2" wide bandsaw blade (non-carbide tipped).
Just send your blades to:
Cooks Saw Mfg
Attn: Resharp Service
160 Ken Ln
Newton, AL 36352

Or for more information you can visit our resharpen page online https://cookssaw.com/resharp-blade-service/
or call us at 1-800-473-4804

Short video of the Cook's Saw two head resaw.
For more information please visit us online at www.cookssaw.com or call us toll free at 1-800-473-4804

Short video of a custom build for a customer needing a 62" wide cut but also for the sawmill to be portable.
For more information you can visit us online at www.cookssaw.com or call us toll free at 1-800-473-4804

In this series we hope to go over several ways that will help you prolong the life of your bandsaw blades for your portable sawmill or resaw.
In this part 2 video Stephen Cook continues his talk about aspects of band wheels that can effect blade life.

For more tips checkout our many articles online at www.cookssaw.com

In this series we hope to go over several ways that will help you prolong the life of your bandsaw blades for your portable sawmill or resaw.
In this part 1 video Stephen Cook gives talks about aspects of band wheels that can effect blade life.

For more tips checkout our many articles online at www.cookssaw.com

In this series we hope to go over several ways that will help you prolong the life of your sawmill blades for your portable sawmill or resaw.
In this video Stephen Cook gives a short intro into some of the areas that we're going to try and cover in this series.

For more tips checkout our many articles online at www.cookssaw.com

Easily clear land from small trees, limbs, and brush with this handy skid steer attachment from Cook's Saw.
For more information please give us a call toll free 1-800-473-4804 or visit us online at www.cookssaw.com

Part 17 of a multi-series of dealing thin kerf bandsaw blades used on portable sawmills and resaws.
In this video Stephen Cook introduces a common issue that sawmillers deal with from time to time - Diving and Rising Bandsaw Blades.
In this part 5 of diving and rising blades Stephen will talk about the Blade Guides and the impact it plays in sawing straight

Visit us online at www.cookssaw.com or call us toll free at 1-800-473-4804

Demo video of the Cook's AC-36 Portable Hydraulic Sawmill used for turning your logs into usable lumber.
For more information call us toll free at 1-880-473-4804 or visit us online at www.cookssaw.com

Part 16 of a multi-series of dealing thin kerf bandsaw blades used on portable sawmills and resaws.
In this video Stephen Cook introduces a common issue that sawmillers deal with from time to time - Diving and Rising Bandsaw Blades.
In this part 4 of diving and rising blades Stephen will talk about the blade body flatness and the impact it plays in sawing straight

Visit us online at www.cookssaw.com or call us toll free at 1-800-473-4804

Part 15 of a multi-series of dealing thin kerf bandsaw blades used on portable sawmills and resaws.
In this video Stephen Cook introduces a common issue that sawmillers deal with from time to time - Diving and Rising Bandsaw Blades.
In this part 3 of diving and rising blades Stephen will talk about the importance of having the correct set.

Visit us online at www.cookssaw.com or call us toll free at 1-800-473-4804

Part 14 of a multi-series of dealing thin kerf bandsaw blades used on portable sawmills and resaws.
In this video Stephen Cook introduces a common issue that sawmillers deal with from time to time - Diving and Rising Bandsaw Blades.
In this particular video Stephen will talk about the importance of having a sharp blade.

Visit us online at www.cookssaw.com or call us toll free at 1-800-473-4804

Part 13 of a multi-series of dealing thin kerf bandsaw blades used on portable sawmills and resaws.
In this video Stephen Cook introduces a common issue that sawmillers deal with from time to time - Diving and Rising Bandsaw Blades.
In this multi-part video we'll try to give some helpful tips on what to look for and how to solve this issue.

Visit us online at www.cookssaw.com or call us toll free at 1-800-473-4804

Part 12 of a multi-series of dealing thin kerf bandsaw blades used on portable sawmills and resaws.
In this video Stephen Cook shows how to use the tensionmeter which will allow you to know exactly how much pressure you are putting on your bandsaw blade.

Tensionmeter can be found here http://store.cookssaw.com/sawmill-parts/misc.-parts/tensionmeter.html

Visit us online at www.cookssaw.com or call us toll free at 1-800-473-4804

Part 11 of a multi-series of dealing thin kerf bandsaw blades used on portable sawmills and resaws.
In this video Stephen Cook answers the question 'How much tension do I use?'

Tensionmeter can be found here http://store.cookssaw.com/sawmill-parts/misc.-parts/tensionmeter.html

Part 10 of a multi-series of dealing with thin kerf bandsaw blades used on portable sawmills and resaws.
In this video Stephen Cook answers the question 'What tooth spacing should I use?'

Visit us online at www.cookssaw.com or call us toll free at 1-800-473-4804

Where should the blade ride on the roller guide? Portable sawmills & Resaws

In this video Stephen Cook offers an answer to a common question as to where a bandsaw blade should ride in relation to the roller guide.

To order bandsaw blades or roller guides visit us at www.cookssaw.com
Email us at [email protected]
Toll Free 1-800-473-4804

In this video Stephen Cook goes over one method of measuring the minimum and maximum length of your bandsaw blade.

For a free catalog on portable sawmill and bandsaw blades please visit us online at www.cookssaw.com or call us toll free at 1-800-473-4804

In this video Stephen Cook answers a customer question about the importance of grinding the gullet of a bandsaw blade.

For an in depth article on this subject visit our articles page https://www.cookssaw.com/2018/05/24/the-real-scoop-on-gullet-grinding/

If you are interested in sawmills or blades please visit us online at www.cookssaw.com or call us toll free and order your free catalog 1-800-473-4804