In this series I take perfectly adequate, and very beautiful, 1999 (I guess) Hamer Stellar 1 guitar and put it to death. Then I resurrect back to living as something much better.

Components that may be utilized, subject to change:
1. DiMarzio Illuminator Bridge and Neck Pickups - Worn Nickel Covers
2. Gotoh 510FA Aluminium Stop Tailpiece - Cosmo Black
3. Gotoh 510FB Tunematic - Cosmo Black
4. Gotoh VK1-19 Control Knobs - Cosmo Black
5. Gotoh EP-B3 Strap Buttons - Cosmo Black
6. Gotoh SG381-04 MGT Magnum Locking Trad Keystone Buttons 3x3 - Cosmo Black
7. Levy's MS17T05 Suede Guitar Strap - Black
8. Tesi Premium Barrel Stereo Output Jack - Cosmo Black
9. Switchcraft Toggle Switch, Short, chrome
10. Ernie Ball Beefy Slinky Cobalt Electric Guitar Strings, 11-54 Gauge (P02727)
11. Ibanez MR500C Molded Hardshell Guitar Case - Multi Series
12. Graph Tech Black Tusq XL Nut
13. CTS 500K Linear Taper Pot w/ Brass Shaft
14. CTS 500K Audio Taper Pot w/ Brass Shaft
15. Dopro Set of 2 Plastic Humbucker Pickup Rings Flat Bottom
16. AllParts Humbucker Springs

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://sniffer-customs-guitar-shop.creator-spring.com/

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

At some point in all lives of persons, I suppose you must assemble some EVH Frankenstrat guitar. I saw these painted bodies on eBay from China, as you may have, and decided this will be easy way to quickly fulfill task and move on with life. Surprisingly, while body is piece of crap, paint job is astonishing. Seriously. Layers of paint, tape job, and even locations of stripes and wear marks are hand made with absolute artistry. If person that painted this body applied this amazing work to a high quality body, they would be able to sell these for fortune of money. With this, I will attach a cheap pre-made neck, cheap humbucker pickups, and best quality tremolo that cost twice as much as body. 🤣

Component listing...in work:
1. Striped body from eBay
2. Kahler 2300 series tremolo with Heavy Arm and Heavy Tension Springs and Wide String Hook (was going to install Gotoh GE1996T for more authentic look, but bizarre body routing does not allow adequate support for pivot stud inserts...and Kahler is better anyway)
3. Set of reflectors from eBay (may not use)
4. FLEOR bridge humbucker - I test at 15.49k resistance
5. Yibuy dual rail humbucker for neck - I test at 12.72k resistance
6. Mojo Tone vintage taper 500k push-pull volume pot for pickup switching
7. Blood red strat "tone" knob for volume
8. True Custom Shop relic output jack plate
9. Pure Tone multi-contact output jack
10. Musiclily 11 hole Strat pickguard...chopped on bandsaw
11. Hillman 4277 stainless steel screw eyes
12. ARMYU general purpose utility shoulder bag strap
13. Banana headstock 22 fret maple China neck from eBay
14. Gotoh SG381-07 MGT non-staggered locking tuners
15. Graph Tech Black TUSQ XL nut
16. Kahler Stringlok Pro (may not use)
17. Ernie Ball 3127 Beefy Slinky titanium reinforced 11-54 strings (tuned to Db...why not?)
18. Relic'd Fender neckplate from eBay
19. Kramer Hard Case from Sweetwater
20. Book on "Guitar Playing For Dummies"
😈

----------------------------------------------------------..

In this series I take perfectly adequate, and very beautiful, 1999 (I guess) Hamer Stellar 1 guitar and put it to death. Then I resurrect back to living as something much better.

Components that may be utilized, subject to change:
1. DiMarzio Illuminator Bridge and Neck Pickups - Worn Nickel Covers
2. Gotoh 510FA Aluminium Stop Tailpiece - Cosmo Black
3. Gotoh 510FB Tunematic - Cosmo Black
4. Gotoh VK1-19 Control Knobs - Cosmo Black
5. Gotoh EP-B3 Strap Buttons - Cosmo Black
6. Gotoh SG381-04 MGT Magnum Locking Trad Keystone Buttons 3x3 - Cosmo Black
7. Levy's MS17T05 Suede Guitar Strap - Black
8. Tesi Premium Barrel Stereo Output Jack - Cosmo Black
9. Switchcraft Toggle Switch, Short, chrome
10. Ernie Ball Beefy Slinky Cobalt Electric Guitar Strings, 11-54 Gauge (P02727)
11. Ibanez MR500C Molded Hardshell Guitar Case - Multi Series
12. Graph Tech Black Tusq XL Nut
13. CTS 500K Linear Taper Pot w/ Brass Shaft
14. CTS 500K Audio Taper Pot w/ Brass Shaft
15. Dopro Set of 2 Plastic Humbucker Pickup Rings Flat Bottom
16. AllParts Humbucker Springs

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://sniffer-customs-guitar-shop.creator-spring.com/

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

Parts list was changing continuously, but I think this is most of what exists in finish product. Basically, Allan Eden jazz body, Might Mite Precision neck, cheap mudbucker neck pickup, cheap MM bridge pickup, Guitar Fetish Compressor Mod Board, home-made diode dirt circuit, and Hipshot bridge and tuning keys :

1. Allen Eden® - Alder Bass [SS] - Black (jazz style body)
2. Mighty Mite Neck for Fender Bass, Maple fingerboard
3. BQLZR Noiseless Good Balance 4 String Bass Pickup
4. Chrome Mudbucker Sidewinder Neck Pickup for Gibson® EB Bass 4 String 30K EBC4
5. Hipshot A Style 4 String Bass Bridge 5A4FM1BC Brass, Chrome, Retrofits 5 Hole Fender
6. Hipshot 1/2" Y Key Ultralite Bass Side Bass Tuning Keys, Chrome - SET OF 4!
7. "OPTICAL ANALOG Compressor/Limiter- COMPLETE Install kit (Guitar Fetish)
9. 25x (25pcs) 1N914 Small Signal Rectifier Diode IN914 - US Seller - Free Shipping
10. CTS 500K B Short Split Shaft LINEAR Taper Pot / Potentiometer
11. K40Y-9 .047uf 200v NOS RUSSIAN PAPER IN OIL CAPACITOR - .047
12. Van Dyke-Harms Extra Thick Stainless Steel Neck Plate with Screws, Fits Fender-s
13. BLACK TUSQ XL 42MM FLAT BOTTOM P BASS
14. Stratocaster Jack plate ferrule,Antiqued Brass finish
15. Stew Mac Battery Box
16. uxcell Terminal Block Connector Bar 10 Positions Single Row High Bridge Design Electric Barrier Bar
17. #5 X 5/8" Antique Copper Self Tapping Oval Head Phillips Drive Machine Wood Screws - SCR558OHPAC
18. E-Z Lok P/N 400-M3, M3 Threaded Brass Insert For Wood (10 Pieces)
19. Rotosound RS77LD Jazz 77 Monel Flatwound Bass Guitar Strings - .045-.105 Standard Long Scale 4-string
20. Levy's M4 3.5" Genuine Leather Bass Strap - Black
21. 10 PCS Stainless Steel Carabiner Clip Spring-Snap Hook - Lotsun M4 1.57 Inch Heavy Duty Carabiner Clips for Keys Swing Set Camping Fishing Hiking Traveling
22. Hillman 4277 Stainless Steel Screw Eyes (#8 x 1-5/8") - 10 pieces
23. SamIdea CNC Machined Aluminum Alloy Rotary Electronic Control Potentiometer Knob for 6 mm Diameter ..

At some point in all lives of persons, I suppose you must assemble some EVH Frankenstrat guitar. I saw these painted bodies on eBay from China, as you may have, and decided this will be easy way to quickly fulfill task and move on with life. Surprisingly, while body is piece of crap, paint job is astonishing. Seriously. Layers of paint, tape job, and even locations of stripes and wear marks are hand made with absolute artistry. If person that painted this body applied this amazing work to a high quality body, they would be able to sell these for fortune of money. With this, I will attach a cheap pre-made neck, cheap humbucker pickups, and best quality tremolo that cost twice as much as body. 🤣

Component listing...in work:
1. Striped body from eBay
2. Kahler 2300 series tremolo with Heavy Arm and Heavy Tension Springs and Wide String Hook (was going to install Gotoh GE1996T for more authentic look, but bizarre body routing does not allow adequate support for pivot stud inserts...and Kahler is better anyway)
3. Set of reflectors from eBay (may not use)
4. FLEOR bridge humbucker - I test at 15.49k resistance
5. Yibuy dual rail humbucker for neck - I test at 12.72k resistance
6. Mojo Tone vintage taper 500k push-pull volume pot for pickup switching
7. Blood red strat "tone" knob for volume
8. True Custom Shop relic output jack plate
9. Pure Tone multi-contact output jack
10. Musiclily 11 hole Strat pickguard...chopped on bandsaw
11. Hillman 4277 stainless steel screw eyes
12. ARMYU general purpose utility shoulder bag strap
13. Banana headstock 22 fret maple China neck from eBay
14. Gotoh SG381-07 MGT non-staggered locking tuners
15. Graph Tech Black TUSQ XL nut
16. Kahler Stringlok Pro (may not use)
17. Ernie Ball 3127 Beefy Slinky titanium reinforced 11-54 strings (tuned to Db...why not?)
18. Relic'd Fender neckplate from eBay
19. Kramer Hard Case from Sweetwater
20. Book on "Guitar Playing For Dummies"
😈

----------------------------------------------------------..

At some point in all lives of persons, I suppose you must assemble some EVH Frankenstrat guitar. I saw these painted bodies on eBay from China, as you may have, and decided this will be easy way to quickly fulfill task and move on with life. Surprisingly, while body is piece of crap, paint job is astonishing. Seriously. Layers of paint, tape job, and even locations of stripes and wear marks are hand made with absolute artistry. If person that painted this body applied this amazing work to a high quality body, they would be able to sell these for fortune of money. With this, I will attach a cheap pre-made neck, cheap humbucker pickups, and best quality tremolo that cost twice as much as body. 🤣

Component listing...in work:
1. Striped body from eBay
2. Kahler 2300 series tremolo with Heavy Arm and Heavy Tension Springs and Wide String Hook (was going to install Gotoh GE1996T for more authentic look, but bizarre body routing does not allow adequate support for pivot stud inserts...and Kahler is better anyway)
3. Set of reflectors from eBay (may not use)
4. FLEOR bridge humbucker - I test at 15.49k resistance
5. Yibuy dual rail humbucker for neck - I test at 12.72k resistance
6. Mojo Tone vintage taper 500k push-pull volume pot for pickup switching
7. Blood red strat "tone" knob for volume
8. True Custom Shop relic output jack plate
9. Pure Tone multi-contact output jack
10. Musiclily 11 hole Strat pickguard...chopped on bandsaw
11. Hillman 4277 stainless steel screw eyes
12. ARMYU general purpose utility shoulder bag strap
13. Banana headstock 22 fret maple China neck from eBay
14. Gotoh SG381-07 MGT non-staggered locking tuners
15. Graph Tech Black TUSQ XL nut
16. Kahler Stringlok Pro (may not use)
17. Ernie Ball 3127 Beefy Slinky titanium reinforced 11-54 strings (tuned to Db...why not?)
18. Relic'd Fender neckplate from eBay
19. Kramer Hard Case from Sweetwater
20. Book on "Guitar Playing For Dummies"
😈

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://sniffer-customs-guitar-shop.creator-spring.com/

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

Parts list was changing continuously, but I think this is most of what exists in finish product. Basically, Allan Eden jazz body, Might Mite Precision neck, cheap mudbucker neck pickup, cheap MM bridge pickup, Guitar Fetish Compressor Mod Board, home-made diode dirt circuit, and Hipshot bridge and tuning keys :

1. Allen Eden® - Alder Bass [SS] - Black (jazz style body)
2. Mighty Mite Neck for Fender Bass, Maple fingerboard
3. BQLZR Noiseless Good Balance 4 String Bass Pickup
4. Chrome Mudbucker Sidewinder Neck Pickup for Gibson® EB Bass 4 String 30K EBC4
5. Hipshot A Style 4 String Bass Bridge 5A4FM1BC Brass, Chrome, Retrofits 5 Hole Fender
6. Hipshot 1/2" Y Key Ultralite Bass Side Bass Tuning Keys, Chrome - SET OF 4!
7. "OPTICAL ANALOG Compressor/Limiter- COMPLETE Install kit (Guitar Fetish)
9. 25x (25pcs) 1N914 Small Signal Rectifier Diode IN914 - US Seller - Free Shipping
10. CTS 500K B Short Split Shaft LINEAR Taper Pot / Potentiometer
11. K40Y-9 .047uf 200v NOS RUSSIAN PAPER IN OIL CAPACITOR - .047
12. Van Dyke-Harms Extra Thick Stainless Steel Neck Plate with Screws, Fits Fender-s
13. BLACK TUSQ XL 42MM FLAT BOTTOM P BASS
14. Stratocaster Jack plate ferrule,Antiqued Brass finish
15. Stew Mac Battery Box
16. uxcell Terminal Block Connector Bar 10 Positions Single Row High Bridge Design Electric Barrier Bar
17. #5 X 5/8" Antique Copper Self Tapping Oval Head Phillips Drive Machine Wood Screws - SCR558OHPAC
18. E-Z Lok P/N 400-M3, M3 Threaded Brass Insert For Wood (10 Pieces)
19. Rotosound RS77LD Jazz 77 Monel Flatwound Bass Guitar Strings - .045-.105 Standard Long Scale 4-string
20. Levy's M4 3.5" Genuine Leather Bass Strap - Black
21. 10 PCS Stainless Steel Carabiner Clip Spring-Snap Hook - Lotsun M4 1.57 Inch Heavy Duty Carabiner Clips for Keys Swing Set Camping Fishing Hiking Traveling
22. Hillman 4277 Stainless Steel Screw Eyes (#8 x 1-5/8") - 10 pieces
23. SamIdea CNC Machined Aluminum Alloy Rotary Electronic Control Potentiometer Knob for 6 mm Diameter Shaft, Volume Control Knob, Audio knob, Guitar Knob,Switch Knob (Red Twill Knob)
24. Alnicov Electronic Guitar Control Knobs Bronze Metal Volume Tone Control Dome Knobs for Guitar Bass Parts 4Pcs
25. 2pcs 9 Pin 3PDT Guitar Effects Pedal Box Stomp Foot Metal Switch True Bypass
26. Pure Tone Multi Contact Stereo Output 1/4" Jack, Nickel
27. Hipshot 405200C 3-String Retainer/String Guide for Bass - CHROME with Screws

😈

---------------------------------------------------------------------------------------------

If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you m

At some point in all lives of persons, I suppose you must assemble some EVH Frankenstrat guitar. I saw these painted bodies on eBay from China, as you may have, and decided this will be easy way to quickly fulfill task and move on with life. Surprisingly, while body is piece of crap, paint job is astonishing. Seriously. Layers of paint, tape job, and even locations of stripes and wear marks are hand made with absolute artistry. If person that painted this body applied this amazing work to a high quality body, they would be able to sell these for fortune of money. With this, I will attach a cheap pre-made neck, cheap humbucker pickups, and best quality tremolo that cost twice as much as body. 🤣

Component listing...in work:
1. Striped body from eBay
2. Kahler 2300 series tremolo with Heavy Arm and Heavy Tension Springs and Wide String Hook (was going to install Gotoh GE1996T for more authentic look, but bizarre body routing does not allow adequate support for pivot stud inserts...and Kahler is better anyway)
3. Set of reflectors from eBay (may not use)
4. FLEOR bridge humbucker - I test at 15.49k resistance
5. Yibuy dual rail humbucker for neck - I test at 12.72k resistance
6. Mojo Tone vintage taper 500k push-pull volume pot for pickup switching
7. Blood red strat "tone" knob for volume
8. True Custom Shop relic output jack plate
9. Pure Tone multi-contact output jack
10. Musiclily 11 hole Strat pickguard...chopped on bandsaw
11. Hillman 4277 stainless steel screw eyes
12. ARMYU general purpose utility shoulder bag strap
13. Banana headstock 22 fret maple China neck from eBay
14. Gotoh SG381-07 MGT non-staggered locking tuners
15. Graph Tech Black TUSQ XL nut
16. Kahler Stringlok Pro (may not use)
17. Ernie Ball 3127 Beefy Slinky titanium reinforced 11-54 strings (tuned to Db...why not?)
18. Relic'd Fender neckplate from eBay
19. Kramer Hard Case from Sweetwater
20. Book on "Guitar Playing For Dummies"
😈

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://sniffer-customs-guitar-shop.creator-spring.com/

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

Parts list was changing continuously, but I think this is most of what exists in finish product. Basically, Allan Eden jazz body, Might Mite Precision neck, cheap mudbucker neck pickup, cheap MM bridge pickup, Guitar Fetish Compressor Mod Board, home-made diode dirt circuit, and Hipshot bridge and tuning keys :

1. Allen Eden® - Alder Bass [SS] - Black (jazz style body)
2. Mighty Mite Neck for Fender Bass, Maple fingerboard
3. BQLZR Noiseless Good Balance 4 String Bass Pickup
4. Chrome Mudbucker Sidewinder Neck Pickup for Gibson® EB Bass 4 String 30K EBC4
5. Hipshot A Style 4 String Bass Bridge 5A4FM1BC Brass, Chrome, Retrofits 5 Hole Fender
6. Hipshot 1/2" Y Key Ultralite Bass Side Bass Tuning Keys, Chrome - SET OF 4!
7. "OPTICAL ANALOG Compressor/Limiter- COMPLETE Install kit (Guitar Fetish)
9. 25x (25pcs) 1N914 Small Signal Rectifier Diode IN914 - US Seller - Free Shipping
10. CTS 500K B Short Split Shaft LINEAR Taper Pot / Potentiometer
11. K40Y-9 .047uf 200v NOS RUSSIAN PAPER IN OIL CAPACITOR - .047
12. Van Dyke-Harms Extra Thick Stainless Steel Neck Plate with Screws, Fits Fender-s
13. BLACK TUSQ XL 42MM FLAT BOTTOM P BASS
14. Stratocaster Jack plate ferrule,Antiqued Brass finish
15. Stew Mac Battery Box
16. uxcell Terminal Block Connector Bar 10 Positions Single Row High Bridge Design Electric Barrier Bar
17. #5 X 5/8" Antique Copper Self Tapping Oval Head Phillips Drive Machine Wood Screws - SCR558OHPAC
18. E-Z Lok P/N 400-M3, M3 Threaded Brass Insert For Wood (10 Pieces)
19. Rotosound RS77LD Jazz 77 Monel Flatwound Bass Guitar Strings - .045-.105 Standard Long Scale 4-string
20. Levy's M4 3.5" Genuine Leather Bass Strap - Black
21. 10 PCS Stainless Steel Carabiner Clip Spring-Snap Hook - Lotsun M4 1.57 Inch Heavy Duty Carabiner Clips for Keys Swing Set Camping Fishing Hiking Traveling
22. Hillman 4277 Stainless Steel Screw Eyes (#8 x 1-5/8") - 10 pieces
23. SamIdea CNC Machined Aluminum Alloy Rotary Electronic Control Potentiometer Knob for 6 mm Diameter Shaft, Volume Control Knob, Audio knob, Guitar Knob,Switch Knob (Red Twill Knob)
24. Alnicov Electronic Guitar Control Knobs Bronze Metal Volume Tone Control Dome Knobs for Guitar Bass Parts 4Pcs
25. 2pcs 9 Pin 3PDT Guitar Effects Pedal Box Stomp Foot Metal Switch True Bypass
26. Pure Tone Multi Contact Stereo Output 1/4" Jack, Nickel
27. Hipshot 405200C 3-String Retainer/String Guide for Bass - CHROME with Screws

😈

---------------------------------------------------------------------------------------------

If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you m

In this series I take perfectly adequate, and very beautiful, 1999 (I guess) Hamer Stellar 1 guitar and put it to death. Then I resurrect back to living as something much better.

Components that may be utilized, subject to change:
1. DiMarzio Illuminator Bridge and Neck Pickups - Worn Nickel Covers
2. Gotoh 510FA Aluminium Stop Tailpiece - Cosmo Black
3. Gotoh 510FB Tunematic - Cosmo Black
4. Gotoh VK1-19 Control Knobs - Cosmo Black
5. Gotoh EP-B3 Strap Buttons - Cosmo Black
6. Gotoh SG381-04 MGT Magnum Locking Trad Keystone Buttons 3x3 - Cosmo Black
7. Levy's MS17T05 Suede Guitar Strap - Black
8. Tesi Premium Barrel Stereo Output Jack - Cosmo Black
9. Switchcraft Toggle Switch, Short, chrome
10. Ernie Ball Beefy Slinky Cobalt Electric Guitar Strings, 11-54 Gauge (P02727)
11. Ibanez MR500C Molded Hardshell Guitar Case - Multi Series
12. Graph Tech Black Tusq XL Nut
13. CTS 500K Linear Taper Pot w/ Brass Shaft
14. CTS 500K Audio Taper Pot w/ Brass Shaft
15. Dopro Set of 2 Plastic Humbucker Pickup Rings Flat Bottom
16. AllParts Humbucker Springs

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://sniffer-customs-guitar-shop.creator-spring.com/

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

At some point in all lives of persons, I suppose you must assemble some EVH Frankenstrat guitar. I saw these painted bodies on eBay from China, as you may have, and decided this will be an easy way to quickly fulfill task and move on with life. Surprisingly, while body is piece of crap, paint job is astonishing. Seriously. Layers of paint, tape job, and even locations of stripes and wear marks are hand made with absolute artistry. If person that painted this body applied this amazing work to a high quality body, they would be able to sell these for fortune of money. With this, I will attach a cheap pre-made neck, cheap humbucker pickups, and best quality tremolo that cost twice as much as body. 🤣

Component listing...in work:
1. Striped body from eBay
2. Kahler 2300 series tremolo with Heavy Arm and Heavy Tension Springs and Wide String Hook (was going to install Gotoh GE1996T for more authentic look, but bizarre body routing does not allow adequate support for pivot stud inserts...and Kahler is better anyway)
3. Set of reflectors from eBay (may not use)
4. FLEOR bridge humbucker - I test at 15.49k resistance
5. Yibuy dual rail humbucker for neck - I test at 12.72k resistance
6. Mojo Tone vintage taper 500k push-pull volume pot for pickup switching
7. Blood red strat "tone" knob for volume
8. True Custom Shop relic output jack plate
9. Pure Tone multi-contact output jack
10. Musiclily 11 hole Strat pickguard...chopped on bandsaw
11. Hillman 4277 stainless steel screw eyes
12. ARMYU general purpose utility shoulder bag strap
13. Banana headstock 22 fret maple China neck from eBay
14. Gotoh SG381-07 MGT non-staggered locking tuners
15. Graph Tech Black TUSQ XL nut
16. Kahler Stringlok Pro (may not use)
17. Ernie Ball 3127 Beefy Slinky titanium reinforced 11-54 strings (tuned to Db...why not?)
18. Relic'd Fender neckplate from eBay
19. Kramer Hard Case from Sweetwater
20. Book on "Guitar Playing For Dummies"
😈

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://sniffer-customs-guitar-shop.creator-spring.com/

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

At some point in all lives of persons, I suppose you must assemble some EVH Frankenstrat guitar. I saw these painted bodies on eBay from China, as you may have, and decided this will be easy way to quickly fulfill task and move on with life. Surprisingly, while body is piece of crap, paint job is astonishing. Seriously. Layers of paint, tape job, and even locations of stripes and wear marks are hand made with absolute artistry. If person that painted this body applied this amazing work to a high quality body, they would be able to sell these for fortune of money. With this, I will attach a cheap pre-made neck, cheap humbucker pickups, and best quality tremolo that cost twice as much as body. 🤣

Component listing...in work:
1. Striped body from eBay
2. Kahler 2300 series tremolo with Heavy Arm and Heavy Tension Springs and Wide String Hook (was going to install Gotoh GE1996T for more authentic look, but bizarre body routing does not allow adequate support for pivot stud inserts...and Kahler is better anyway)
3. Set of reflectors from eBay (may not use)
4. FLEOR bridge humbucker - I test at 15.49k resistance
5. Yibuy dual rail humbucker for neck - I test at 12.72k resistance
6. Mojo Tone vintage taper 500k push-pull volume pot for pickup switching
7. Blood red strat "tone" knob for volume
8. True Custom Shop relic output jack plate
9. Pure Tone multi-contact output jack
10. Musiclily 11 hole Strat pickguard...chopped on bandsaw
11. Hillman 4277 stainless steel screw eyes
12. ARMYU general purpose utility shoulder bag strap
13. Banana headstock 22 fret maple China neck from eBay
14. Gotoh SG381-07 MGT non-staggered locking tuners
15. Graph Tech Black TUSQ XL nut
16. Kahler Stringlok Pro (may not use)
17. Ernie Ball 3127 Beefy Slinky titanium reinforced 11-54 strings (tuned to Db...why not?)
18. Relic'd Fender neckplate from eBay
19. Kramer Hard Case from Sweetwater
20. Book on "Guitar Playing For Dummies"
😈

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://sniffer-customs-guitar-shop.creator-spring.com/

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

In this series I take perfectly adequate, and very beautiful, 1999 (I guess) Hamer Stellar 1 guitar and put it to death. Then I resurrect back to living as something much better.

Components that may be utilized, subject to change:
1. DiMarzio Illuminator Bridge and Neck Pickups - Worn Nickel Covers
2. Gotoh 510FA Aluminium Stop Tailpiece - Cosmo Black
3. Gotoh 510FB Tunematic - Cosmo Black
4. Gotoh VK1-19 Control Knobs - Cosmo Black
5. Gotoh EP-B3 Strap Buttons - Cosmo Black
6. Gotoh SG381-04 MGT Magnum Locking Trad Keystone Buttons 3x3 - Cosmo Black
7. Levy's MS17T05 Suede Guitar Strap - Black
8. Tesi Premium Barrel Stereo Output Jack - Cosmo Black
9. Switchcraft Toggle Switch, Short, chrome
10. Ernie Ball Beefy Slinky Cobalt Electric Guitar Strings, 11-54 Gauge (P02727)
11. Ibanez MR500C Molded Hardshell Guitar Case - Multi Series
12. Graph Tech Black Tusq XL Nut
13. CTS 500K Linear Taper Pot w/ Brass Shaft
14. CTS 500K Audio Taper Pot w/ Brass Shaft
15. Dopro Set of 2 Plastic Humbucker Pickup Rings Flat Bottom
16. AllParts Humbucker Springs

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://sniffer-customs-guitar-shop.creator-spring.com/

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

At some point in all lives of persons, I suppose you must assemble some EVH Frankenstrat guitar. I saw these painted bodies on eBay from China, as you may have, and decided this will be easy way to quickly fulfill task and move on with life. Surprisingly, while body is piece of crap, paint job is astonishing. Seriously. Layers of paint, tape job, and even locations of stripes and wear marks are hand made with absolute artistry. If person that painted this body applied this amazing work to a high quality body, they would be able to sell these for fortune of money. With this, I will attach a cheap pre-made neck, cheap humbucker pickups, and best quality tremolo that cost twice as much as body. 🤣

Component listing...in work:
1. Striped body from eBay
2. Kahler 2300 series tremolo with Heavy Arm and Heavy Tension Springs and Wide String Hook (was going to install Gotoh GE1996T for more authentic look, but bizarre body routing does not allow adequate support for pivot stud inserts...and Kahler is better anyway)
3. Set of reflectors from eBay (may not use)
4. FLEOR bridge humbucker - I test at 15.49k resistance
5. Yibuy dual rail humbucker for neck - I test at 12.72k resistance
6. Mojo Tone vintage taper 500k push-pull volume pot for pickup switching
7. Blood red strat "tone" knob for volume
8. True Custom Shop relic output jack plate
9. Pure Tone multi-contact output jack
10. Musiclily 11 hole Strat pickguard...chopped on bandsaw
11. Hillman 4277 stainless steel screw eyes
12. ARMYU general purpose utility shoulder bag strap
13. Banana headstock 22 fret maple China neck from eBay
14. Gotoh SG381-07 MGT non-staggered locking tuners
15. Graph Tech Black TUSQ XL nut
16. Kahler Stringlok Pro (may not use)
17. Ernie Ball 3127 Beefy Slinky titanium reinforced 11-54 strings (tuned to Db...why not?)
18. Relic'd Fender neckplate from eBay
19. Kramer Hard Case from Sweetwater
20. Book on "Guitar Playing For Dummies"
😈

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://sniffer-customs-guitar-shop.creator-spring.com/

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

At some point in all lives of persons, I suppose you must assemble some EVH Frankenstrat guitar. I saw these painted bodies on eBay from China, as you may have, and decided this will be an easy way to quickly fulfill task and move on with life. Surprisingly, while body is piece of crap, paint job is astonishing. Seriously. Layers of paint, tape job, and even locations of stripes and wear marks are hand made with absolute artistry. If person that painted this body applied this amazing work to a high quality body, they would be able to sell these for fortune of money. With this, I will attach a cheap pre-made neck, cheap humbucker pickups, and best quality tremolo that cost twice as much as body. 🤣

Component listing...in work:
1. Striped body from eBay
2. Kahler 2300 series tremolo with Heavy Arm and Heavy Tension Springs and Wide String Hook (was going to install Gotoh GE1996T for more authentic look, but bizarre body routing does not allow adequate support for pivot stud inserts...and Kahler is better anyway)
3. Set of reflectors from eBay (may not use)
4. FLEOR bridge humbucker - I test at 15.49k resistance
5. Yibuy dual rail humbucker for neck - I test at 12.72k resistance
6. Mojo Tone vintage taper 500k push-pull volume pot for pickup switching
7. Blood red strat "tone" knob for volume
8. True Custom Shop relic output jack plate
9. Pure Tone multi-contact output jack
10. Musiclily 11 hole Strat pickguard...chopped on bandsaw
11. Hillman 4277 stainless steel screw eyes
12. ARMYU general purpose utility shoulder bag strap
13. Banana headstock 22 fret maple China neck from eBay
14. Gotoh SG381-07 MGT non-staggered locking tuners
15. Graph Tech Black TUSQ XL nut
16. Kahler Stringlok Pro (may not use)
17. Ernie Ball 3127 Beefy Slinky titanium reinforced 11-54 strings (tuned to Db...why not?)
18. Relic'd Fender neckplate from eBay
19. Kramer Hard Case from Sweetwater
20. Book on "Guitar Playing For Dummies"
😈

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://sniffer-customs-guitar-shop.creator-spring.com/

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

In Clip 5, I install items such as Vega-Trem VT1, Gotoh EP-B3 oversize strap buttons, and Tusq nut. 🤘🏼

Component Listing:

1. Vega-Trem VT1 Ultra Tremolo 4 point VT4RH (these are amazing)
2. DiMarzio True Velvet Neck Pickup
3. Dimarzio True Velvet Middle Pickup
4. DiMarzio FS-1 Bridge Pickup
5. Orange Drop .022 Microfarad Tone Capacitor (no tone control on middle pickup only selection/no jumper)
6. CTS 250K Audio Taper Pro Guitar Pot w/ Brass Shaft x 2 (for tone)
7. CTS 250K Linear Taper Pro Guitar Pots w/ Brass Shaft (for volume)
8. CRL/DiMarzio Branded 5-Way Switch (do not use included switch tip...too short)
9. ALLPARTS SK-0710-023 Black USA Switch Tips for Stratocaster (perfect fit)
10. Magpul 30 Round Ak-47 Magazine (MOST magazine is BEST magazine.)
11. FU-Tone Brass Spring Claw (very nice...SUPER heavy duty compared to Floyd brass; hole drilled to attach ground wire with bolt)
12. Gotoh EP-B3 Strap Buttons - Cosmo Black
13. Fender Black Felt Washers p/n 0994929000 (sold in 12-pack; for strap buttons)
14. FLEOR 3Ply Cream SSS 8 Hole Strat Pickguard (screw hole line up pretty well; may need neck pocket sanding)
15. Kluson 6-In-Line Locking Revolution Series H-Mount Tuners - nickel (threaded collar/nut version for modern 10mm hole)
16. Graph Tech Black Tusq XL PT-7004-00 Sleek String Tree (only need one of pair; install with stainless socket head cap screw)
17. Graph Tech PT-5010-00 Flat Bottom Nut For Strat, BLACK TUSQ XL (closest match for Squier strat, short of carving from blank; string spacing slightly wider)
18. Full copper shielding and all stainless fasteners.
19. PURE TONE 1/4" Multi-Contact Mono Guitar Output Jack - Black
20. True Custom Shop Bare Metal Boat Jack Plate for Fender Stratocaster

😈

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://teespring.com/stores/sniffer-customs-guitar-shop

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

In this fourth clip, I install electronic components. 🤘🏼

Parts list was changing continuously, but I think this is most of what exists in finish product. Basically, Allan Eden jazz body, Might Mite Precision neck, cheap mudbucker neck pickup, cheap MM bridge pickup, Guitar Fetish Compressor Mod Board, home-made diode dirt circuit, and Hipshot bridge and tuning keys :

1. Allen Eden® - Alder Bass [SS] - Black (jazz style body)
2. Mighty Mite Neck for Fender Bass, Maple fingerboard
3. BQLZR Noiseless Good Balance 4 String Bass Pickup
4. Chrome Mudbucker Sidewinder Neck Pickup for Gibson® EB Bass 4 String 30K EBC4
5. Hipshot A Style 4 String Bass Bridge 5A4FM1BC Brass, Chrome, Retrofits 5 Hole Fender
6. Hipshot 1/2" Y Key Ultralite Bass Side Bass Tuning Keys, Chrome - SET OF 4!
7. "OPTICAL ANALOG Compressor/Limiter- COMPLETE Install kit (Guitar Fetish)
9. 25x (25pcs) 1N914 Small Signal Rectifier Diode IN914 - US Seller - Free Shipping
10. CTS 500K B Short Split Shaft LINEAR Taper Pot / Potentiometer
11. K40Y-9 .047uf 200v NOS RUSSIAN PAPER IN OIL CAPACITOR - .047
12. Van Dyke-Harms Extra Thick Stainless Steel Neck Plate with Screws, Fits Fender-s
13. BLACK TUSQ XL 42MM FLAT BOTTOM P BASS
14. Stratocaster Jack plate ferrule,Antiqued Brass finish
15. Stew Mac Battery Box
16. uxcell Terminal Block Connector Bar 10 Positions Single Row High Bridge Design Electric Barrier Bar
17. #5 X 5/8" Antique Copper Self Tapping Oval Head Phillips Drive Machine Wood Screws - SCR558OHPAC
18. E-Z Lok P/N 400-M3, M3 Threaded Brass Insert For Wood (10 Pieces)
19. Rotosound RS77LD Jazz 77 Monel Flatwound Bass Guitar Strings - .045-.105 Standard Long Scale 4-string
20. Levy's M4 3.5" Genuine Leather Bass Strap - Black
21. 10 PCS Stainless Steel Carabiner Clip Spring-Snap Hook - Lotsun M4 1.57 Inch Heavy Duty Carabiner Clips for Keys Swing Set Camping Fishing Hiking Traveling
22. Hillman 4277 Stainless Steel Screw Eyes (#8 x 1-5/8") - 10 pieces
23. SamIdea CNC Machined Aluminum Alloy Rotary Electronic Control Potentiometer Knob for 6 mm Diameter Shaft, Volume Control Knob, Audio knob, Guitar Knob,Switch Knob (Red Twill Knob)
24. Alnicov Electronic Guitar Control Knobs Bronze Metal Volume Tone Control Dome Knobs for Guitar Bass Parts 4Pcs
25. 2pcs 9 Pin 3PDT Guitar Effects Pedal Box Stomp Foot Metal Switch True Bypass
26. Pure Tone Multi Contact Stereo Output 1/4" Jack, Nickel
27. Hipshot 405200C 3-String Retainer/String Guide for Bass - CHROME with Screws

😈

---------------------------------------------------------------------------------------------

If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeS

In Clip 4, I prepare neck pocket, and install electronic components. 🤘🏼

Component Listing:

1. Vega-Trem VT1 Ultra Tremolo 4 point VT4RH (these are amazing)
2. DiMarzio True Velvet Neck Pickup
3. Dimarzio True Velvet Middle Pickup
4. DiMarzio FS-1 Bridge Pickup
5. Orange Drop .022 Microfarad Tone Capacitor (no tone control on middle pickup only selection/no jumper)
6. CTS 250K Audio Taper Pro Guitar Pot w/ Brass Shaft x 2 (for tone)
7. CTS 250K Linear Taper Pro Guitar Pots w/ Brass Shaft (for volume)
8. CRL/DiMarzio Branded 5-Way Switch (do not use included switch tip...too short)
9. ALLPARTS SK-0710-023 Black USA Switch Tips for Stratocaster (perfect fit)
10. Magpul 30 Round Ak-47 Magazine (MOST magazine is BEST magazine.)
11. FU-Tone Brass Spring Claw (very nice...SUPER heavy duty compared to Floyd brass; hole drilled to attach ground wire with bolt)
12. Gotoh EP-B3 Strap Buttons - Cosmo Black
13. Fender Black Felt Washers p/n 0994929000 (sold in 12-pack; for strap buttons)
14. FLEOR 3Ply Cream SSS 8 Hole Strat Pickguard (screw hole line up pretty well; may need neck pocket sanding)
15. Kluson 6-In-Line Locking Revolution Series H-Mount Tuners - nickel (threaded collar/nut version for modern 10mm hole)
16. Graph Tech Black Tusq XL PT-7004-00 Sleek String Tree (only need one of pair; install with stainless socket head cap screw)
17. Graph Tech PT-5010-00 Flat Bottom Nut For Strat, BLACK TUSQ XL (closest match for Squier strat, short of carving from blank; string spacing slightly wider)
18. Full copper shielding and all stainless fasteners.
19. PURE TONE 1/4" Multi-Contact Mono Guitar Output Jack - Black
20. True Custom Shop Bare Metal Boat Jack Plate for Fender Stratocaster

😈

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://teespring.com/stores/sniffer-customs-guitar-shop

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

For third episode, I prepare body for installation of electronics. Test fitting components, and lining cavities with copper foil. Very exciting! 🤘🏼

Parts list was changing continuously, but I think this is most of what exists in finish product. Basically, Allan Eden jazz body, Might Mite Precision neck, cheap mudbucker neck pickup, cheap MM bridge pickup, Guitar Fetish Compressor Mod Board, home-made diode dirt circuit, and Hipshot bridge and tuning keys :

1. Allen Eden® - Alder Bass [SS] - Black (jazz style body)
2. Mighty Mite Neck for Fender Bass, Maple fingerboard
3. BQLZR Noiseless Good Balance 4 String Bass Pickup
4. Chrome Mudbucker Sidewinder Neck Pickup for Gibson® EB Bass 4 String 30K EBC4
5. Hipshot A Style 4 String Bass Bridge 5A4FM1BC Brass, Chrome, Retrofits 5 Hole Fender
6. Hipshot 1/2" Y Key Ultralite Bass Side Bass Tuning Keys, Chrome - SET OF 4!
7. "OPTICAL ANALOG Compressor/Limiter- COMPLETE Install kit (Guitar Fetish)
9. 25x (25pcs) 1N914 Small Signal Rectifier Diode IN914 - US Seller - Free Shipping
10. CTS 500K B Short Split Shaft LINEAR Taper Pot / Potentiometer
11. K40Y-9 .047uf 200v NOS RUSSIAN PAPER IN OIL CAPACITOR - .047
12. Van Dyke-Harms Extra Thick Stainless Steel Neck Plate with Screws, Fits Fender-s
13. BLACK TUSQ XL 42MM FLAT BOTTOM P BASS
14. Stratocaster Jack plate ferrule,Antiqued Brass finish
15. Stew Mac Battery Box
16. uxcell Terminal Block Connector Bar 10 Positions Single Row High Bridge Design Electric Barrier Bar
17. #5 X 5/8" Antique Copper Self Tapping Oval Head Phillips Drive Machine Wood Screws - SCR558OHPAC
18. E-Z Lok P/N 400-M3, M3 Threaded Brass Insert For Wood (10 Pieces)
19. Rotosound RS77LD Jazz 77 Monel Flatwound Bass Guitar Strings - .045-.105 Standard Long Scale 4-string
20. Levy's M4 3.5" Genuine Leather Bass Strap - Black
21. 10 PCS Stainless Steel Carabiner Clip Spring-Snap Hook - Lotsun M4 1.57 Inch Heavy Duty Carabiner Clips for Keys Swing Set Camping Fishing Hiking Traveling
22. Hillman 4277 Stainless Steel Screw Eyes (#8 x 1-5/8") - 10 pieces
23. SamIdea CNC Machined Aluminum Alloy Rotary Electronic Control Potentiometer Knob for 6 mm Diameter Shaft, Volume Control Knob, Audio knob, Guitar Knob,Switch Knob (Red Twill Knob)
24. Alnicov Electronic Guitar Control Knobs Bronze Metal Volume Tone Control Dome Knobs for Guitar Bass Parts 4Pcs
25. 2pcs 9 Pin 3PDT Guitar Effects Pedal Box Stomp Foot Metal Switch True Bypass
26. Pure Tone Multi Contact Stereo Output 1/4" Jack, Nickel
27. Hipshot 405200C 3-String Retainer/String Guide for Bass - CHROME with Screws

😈

---------------------------------------------------------------------------------------------

If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

In this episode you may see process of shielding cavities and scratch plate with copper foil. Hold on to your trousers! 🤘🏼

Component Listing:

1. Vega-Trem VT1 Ultra Tremolo 4 point VT4RH (these are amazing)
2. DiMarzio True Velvet Neck Pickup
3. Dimarzio True Velvet Middle Pickup
4. DiMarzio FS-1 Bridge Pickup
5. Orange Drop .022 Microfarad Tone Capacitor (no tone control on middle pickup only selection/no jumper)
6. CTS 250K Audio Taper Pro Guitar Pot w/ Brass Shaft x 2 (for tone)
7. CTS 250K Linear Taper Pro Guitar Pots w/ Brass Shaft (for volume)
8. CRL/DiMarzio Branded 5-Way Switch (do not use included switch tip...too short)
9. ALLPARTS SK-0710-023 Black USA Switch Tips for Stratocaster (perfect fit)
10. Magpul 30 Round Ak-47 Magazine (MOST magazine is BEST magazine.)
11. FU-Tone Brass Spring Claw (very nice...SUPER heavy duty compared to Floyd brass; hole drilled to attach ground wire with bolt)
12. Gotoh EP-B3 Strap Buttons - Cosmo Black
13. Fender Black Felt Washers p/n 0994929000 (sold in 12-pack; for strap buttons)
14. FLEOR 3Ply Cream SSS 8 Hole Strat Pickguard (screw hole line up pretty well; may need neck pocket sanding)
15. Kluson 6-In-Line Locking Revolution Series H-Mount Tuners - nickel (threaded collar/nut version for modern 10mm hole)
16. Graph Tech Black Tusq XL PT-7004-00 Sleek String Tree (only need one of pair; install with stainless socket head cap screw)
17. Graph Tech PT-5010-00 Flat Bottom Nut For Strat, BLACK TUSQ XL (closest match for Squier strat, short of carving from blank; string spacing slightly wider)
18. Full copper shielding and all stainless fasteners.
19. PURE TONE 1/4" Multi-Contact Mono Guitar Output Jack - Black
20. True Custom Shop Bare Metal Boat Jack Plate for Fender Stratocaster

😈

---------------------------------------------------------------------------------------------
If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://teespring.com/stores/sniffer-customs-guitar-shop

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

In second clip, I make cavities for electronics, and fabricate aluminum armor plating cavity covers.

Parts list was changing continuously, but I think this is most of what exists in finish product. Basically, Allan Eden jazz body, Might Mite Precision neck, cheap mudbucker neck pickup, cheap MM bridge pickup, Guitar Fetish Compressor Mod Board, home-made diode dirt circuit, and Hipshot bridge and tuning keys :

1. Allen Eden® - Alder Bass [SS] - Black (jazz style body)
2. Mighty Mite Neck for Fender Bass, Maple fingerboard
3. BQLZR Noiseless Good Balance 4 String Bass Pickup
4. Chrome Mudbucker Sidewinder Neck Pickup for Gibson® EB Bass 4 String 30K EBC4
5. Hipshot A Style 4 String Bass Bridge 5A4FM1BC Brass, Chrome, Retrofits 5 Hole Fender
6. Hipshot 1/2" Y Key Ultralite Bass Side Bass Tuning Keys, Chrome - SET OF 4!
7. "OPTICAL ANALOG Compressor/Limiter- COMPLETE Install kit (Guitar Fetish)
9. 25x (25pcs) 1N914 Small Signal Rectifier Diode IN914 - US Seller - Free Shipping
10. CTS 500K B Short Split Shaft LINEAR Taper Pot / Potentiometer
11. K40Y-9 .047uf 200v NOS RUSSIAN PAPER IN OIL CAPACITOR - .047
12. Van Dyke-Harms Extra Thick Stainless Steel Neck Plate with Screws, Fits Fender-s
13. BLACK TUSQ XL 42MM FLAT BOTTOM P BASS
14. Stratocaster Jack plate ferrule,Antiqued Brass finish
15. Stew Mac Battery Box
16. uxcell Terminal Block Connector Bar 10 Positions Single Row High Bridge Design Electric Barrier Bar
17. #5 X 5/8" Antique Copper Self Tapping Oval Head Phillips Drive Machine Wood Screws - SCR558OHPAC
18. E-Z Lok P/N 400-M3, M3 Threaded Brass Insert For Wood (10 Pieces)
19. Rotosound RS77LD Jazz 77 Monel Flatwound Bass Guitar Strings - .045-.105 Standard Long Scale 4-string
20. Levy's M4 3.5" Genuine Leather Bass Strap - Black
21. 10 PCS Stainless Steel Carabiner Clip Spring-Snap Hook - Lotsun M4 1.57 Inch Heavy Duty Carabiner Clips for Keys Swing Set Camping Fishing Hiking Traveling
22. Hillman 4277 Stainless Steel Screw Eyes (#8 x 1-5/8") - 10 pieces
23. SamIdea CNC Machined Aluminum Alloy Rotary Electronic Control Potentiometer Knob for 6 mm Diameter Shaft, Volume Control Knob, Audio knob, Guitar Knob,Switch Knob (Red Twill Knob)
24. Alnicov Electronic Guitar Control Knobs Bronze Metal Volume Tone Control Dome Knobs for Guitar Bass Parts 4Pcs
25. 2pcs 9 Pin 3PDT Guitar Effects Pedal Box Stomp Foot Metal Switch True Bypass
26. Pure Tone Multi Contact Stereo Output 1/4" Jack, Nickel
27. Hipshot 405200C 3-String Retainer/String Guide for Bass - CHROME with Screws

😈

---------------------------------------------------------------------------------------------

If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Intention of this project was to assemble some simple and inexpensive bass from parts, just for a comfortable and nice sound instrument to play in kitchen studio for recordings. Like most projects, it makes horrific turn, and becomes monster.

Parts list was changing continuously, but I think this is most of what exists in finish product. Basically, Allan Eden jazz body, Might Mite Precision neck, cheap mudbucker neck pickup, cheap MM bridge pickup, Guitar Fetish Compressor Mod Board, home-made diode dirt circuit, and Hipshot bridge and tuning keys :

1. Allen Eden® - Alder Bass [SS] - Black (jazz style body)
2. Mighty Mite Neck for Fender Bass, Maple fingerboard
3. BQLZR Noiseless Good Balance 4 String Bass Pickup
4. Chrome Mudbucker Sidewinder Neck Pickup for Gibson® EB Bass 4 String 30K EBC4
5. Hipshot A Style 4 String Bass Bridge 5A4FM1BC Brass, Chrome, Retrofits 5 Hole Fender
6. Hipshot 1/2" Y Key Ultralite Bass Side Bass Tuning Keys, Chrome - SET OF 4!
7. "OPTICAL ANALOG Compressor/Limiter- COMPLETE Install kit (Guitar Fetish)
9. 25x (25pcs) 1N914 Small Signal Rectifier Diode IN914 - US Seller - Free Shipping
10. CTS 500K B Short Split Shaft LINEAR Taper Pot / Potentiometer
11. K40Y-9 .047uf 200v NOS RUSSIAN PAPER IN OIL CAPACITOR - .047
12. Van Dyke-Harms Extra Thick Stainless Steel Neck Plate with Screws, Fits Fender-s
13. BLACK TUSQ XL 42MM FLAT BOTTOM P BASS
14. Stratocaster Jack plate ferrule,Antiqued Brass finish
15. Stew Mac Battery Box
16. uxcell Terminal Block Connector Bar 10 Positions Single Row High Bridge Design Electric Barrier Bar
17. #5 X 5/8" Antique Copper Self Tapping Oval Head Phillips Drive Machine Wood Screws - SCR558OHPAC
18. E-Z Lok P/N 400-M3, M3 Threaded Brass Insert For Wood (10 Pieces)
19. Rotosound RS77LD Jazz 77 Monel Flatwound Bass Guitar Strings - .045-.105 Standard Long Scale 4-string
20. Levy's M4 3.5" Genuine Leather Bass Strap - Black
21. 10 PCS Stainless Steel Carabiner Clip Spring-Snap Hook - Lotsun M4 1.57 Inch Heavy Duty Carabiner Clips for Keys Swing Set Camping Fishing Hiking Traveling
22. Hillman 4277 Stainless Steel Screw Eyes (#8 x 1-5/8") - 10 pieces
23. SamIdea CNC Machined Aluminum Alloy Rotary Electronic Control Potentiometer Knob for 6 mm Diameter Shaft, Volume Control Knob, Audio knob, Guitar Knob,Switch Knob (Red Twill Knob)
24. Alnicov Electronic Guitar Control Knobs Bronze Metal Volume Tone Control Dome Knobs for Guitar Bass Parts 4Pcs
25. 2pcs 9 Pin 3PDT Guitar Effects Pedal Box Stomp Foot Metal Switch True Bypass
26. Pure Tone Multi Contact Stereo Output 1/4" Jack, Nickel
27. Hipshot 405200C 3-String Retainer/String Guide for Bass - CHROME with Screws

😈

---------------------------------------------------------------------------------------------

If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a questi

In first step of modification process, I disassemble guitar completely, and remove all factory electronics and hardware. Screw holes are reinforced with wood glue in preparation for re-assembly with parts list below:

1. Vega-Trem VT1 Ultra Tremolo 4 point VT4RH (these are amazing)
2. DiMarzio True Velvet Neck Pickup
3. Dimarzio True Velvet Middle Pickup
4. DiMarzio FS-1 Bridge Pickup
5. Orange Drop .022 Microfarad Tone Capacitor (no tone control on middle pickup only selection/no jumper)
6. CTS 250K Audio Taper Pro Guitar Pot w/ Brass Shaft x 2 (for tone)
7. CTS 250K Linear Taper Pro Guitar Pots w/ Brass Shaft (for volume)
8. CRL/DiMarzio Branded 5-Way Switch (do not use included switch tip...too short)
9. ALLPARTS SK-0710-023 Black USA Switch Tips for Stratocaster (perfect fit)
10. Magpul 30 Round Ak-47 Magazine (MOST magazine is BEST magazine.)
11. FU-Tone Brass Spring Claw (very nice...SUPER heavy duty compared to Floyd brass; hole drilled to attach ground wire with bolt)
12. Gotoh EP-B3 Strap Buttons - Cosmo Black
13. Fender Black Felt Washers p/n 0994929000 (sold in 12-pack; for strap buttons)
14. FLEOR 3Ply Cream SSS 8 Hole Strat Pickguard (screw hole line up pretty well; may need neck pocket sanding)
15. Kluson 6-In-Line Locking Revolution Series H-Mount Tuners - nickel (threaded collar/nut version for modern 10mm hole)
16. Graph Tech Black Tusq XL PT-7004-00 Sleek String Tree (only need one of pair; install with stainless socket head cap screw)
17. Graph Tech PT-5010-00 Flat Bottom Nut For Strat, BLACK TUSQ XL (closest match for Squier strat, short of carving from blank; string spacing slightly wider)
18. Full copper shielding and all stainless fasteners.
19. PURE TONE 1/4" Multi-Contact Mono Guitar Output Jack - Black
20. True Custom Shop Bare Metal Boat Jack Plate for Fender Stratocaster

---------------------------------------------------------------------------------------------

If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://teespring.com/stores/sniffer-customs-guitar-shop

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭

Yuri Bezmenov - KGB - Deception Was My Job Complete
A conversation with Yuri Bezmenov, former propagandist for the KGB.
Complete Interview
1984

Intent of this project was to throw together a quick and inexpensive "Partscaster" that would be light and comfortable, with thought I may start actually learning to play guitar...after 35+ years of modifying them. (Strat style guitar is most comfortable for practice play guitar. I don't practice play guitar.) But, when I price some inexpensive body and neck components, I found this brand new Squier guitar is so cheap, I just buy brand new whole guitar. 😂 It's absolutely great value...very nice guitar right from box. Beautiful vintage style neck (although fake vintage color is a little too orange to me), vintage style tuners, skunk stripe, and thick body. Specification says body is made from pine wood, which does not seem like logical choice for electric guitar. But, if it fails, I can use it for firewood when electricity fails this winter. Pickups sound fine...they sound like Strat guitar should sound.

This guitar needs no modifications...it is great as is. But, input jack is loose, so I'll need to remove jack plate and tighten it. Since I'll have jack plate removed, I figure I'll make a few more SMALL tweaks to guitar. Maybe something like this:

1. Vega-Trem VT1 Ultra Tremolo 4 point VT4RH (these are amazing)
2. DiMarzio True Velvet Neck Pickup
3. Dimarzio True Velvet Middle Pickup
4. DiMarzio FS-1 Bridge Pickup
5. CTS or Bourns Pots / Orange Drop Cap
6. CRL/DiMarzio 5-Way Switch
7. Fender American Vintage Tremolo Tension Springs
8. FU-Tone Brass Spring Claw
9. Gotoh EP-B3 Strap Buttons - Nickel
10. FLEOR 3Ply Cream SSS 8 Hole Strat Pickguard
11. Gotoh SD91-MGT 6-In-Line Vintage Style Locking Tuning Keys
12. Callaham String Tree, Stainless Round
13. GraphTech AGED TUSQ XL SLOTTED NUT PQL-5000-AG
14. Full copper shielding and all stainless fasteners.
15. PURE TONE 1/4" Multi-Contact Mono Guitar Output Jack
16. AP-0610-003 Gotoh JSC-1 Black Angled Jack Plate or True Custom Shop Bare Metal Boat Jack Plate
17. Magpul 30 Round Ak-47 Magazine
18. PEZ Dispenser

I'll probably put ALL original electronics and hardware from this guitar on my eBay store for $1 starting price auction...leaving pickguard loaded and include some scotchloks so that it may be installed without soldering, if anyone wants it. 😈

Sound demonstration at end of video performed using new Boss HM-2W Waza Craft Heavy Metal Distortion Pedal. It sucks for Heavy Metal, but is actually a good FUZZ pedal.

5:20 Clean Tone with electro-harmonix Pulsar Tremolo Pedal Test
8:19 Fuzz Tone with Boss Waza Craft Hm-2w Heavy Metal Pedal and Morley Wah Test

---------------------------------------------------------------------------------------------

If Sniffer Customs can build and mod guitar, YOU can build and mod guitar! 🤘

I hope that you may find some entertainment is these videos, and maybe even some helpful information in comment section discussion. If I may not answer a question, perhaps someone else will. Click 👎 if you think my guitar playing skills are AWESOME!

Order cheap Sniffer Customs t-shirt product, as seen in video clips, at Sniffer Customs TeeSpring store. (T-shirt only available in short sleeve...you must cut off sleeves yourself to show muscle.) Sexy yoga pants also available...you may cut sleeves off of these as well. https://teespring.com/stores/sniffer-customs-guitar-shop

Due to incident with some nefarious big hairy man, the Sniffer Customs Used Dirty Yoga Pant Buy-Back Program has been discontinued. 😭