WhattheSheet
Raising my living room floor and laying down new vinyl flooring. Here’s a link for the exact flooring we used.
https://www.homedepot.com/s/lifeproof%2520vinyl%2520plank%2520flooring?NCNI-5
Material List:
Amount Material
12 2”x12”x12’
2 2”x12”x8’
7 4’x8’x3/4” T&G
3 PL400 (adhesive)
2 Great Stuff (foam adhesive)
23 cases Lifeproof 12mm vinyl flooring
Tool Links:
impact driver: https://amzn.to/3lCHors
Multi tool: https://amzn.to/3AIfGxv
Circular saw kit: https://amzn.to/3xMMm7h
Contact Me:
[email protected]
Other Video Platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Comparing my Ryobi Airstrike nailers in both 18 and 23 gauge against my 18 gauge Ridgid air nailer.
Tool Links:
Ryobi 18 Gauge: https://www.homedepot.com/p/RYOBI-ONE-18V-Cordless-AirStrike-18-Gauge-Brad-Nailer-Tool-Only-with-Sample-Nails-P320/203810823
Ryobi 23 Gauge: https://www.homedepot.com/p/RYOBI-ONE-18V-Cordless-AirStrike-18-Gauge-Brad-Nailer-Tool-Only-with-Sample-Nails-P320/203810823
Ridgid 18 Gauge Air Nailer: https://www.homedepot.com/p/RYOBI-ONE-18V-Cordless-AirStrike-18-Gauge-Brad-Nailer-Tool-Only-with-Sample-Nails-P320/203810823
Contact Me:
[email protected]
Other Video Platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Making some fishing brag boards for your cabin or ice shack.
Contact Me:
[email protected]
Other Video Platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Building two Adirondack chairs from a template from Rockler. This project takes roughly 3-4 hours per chair from start to finish.
Material List(2 chairs):
(4) 1”x6”x8’ Pine
(2) 1”x8”x8’ Pine
(1) 2”x4”x8’ Stud
(2) 2”x6”x8’ Stud
(2) 2”x8”x8’ Stud
(26) 2 1/2” screws
(46) 1 5/8” screws
Stain/Paint
Amazon Affiliate Links:
impact driver: https://amzn.to/3lCHors
Contact Me:
[email protected]
Other Video Platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Building some brag boards for displaying pictures and drawings from your kids or grandkids. This is a very simple project that can be done within less than an hour from start to finish.
Material List:
1”x8”x6’ Pine board (cut to 24” lengths)
18 Clothes Pins (6 per board)
Stain/Paint
Amazon Affiliate Links:
Milwaukee M12 Stapler (Kit, $194): https://www.homedepot.com/p/Milwaukee-M12-12-Volt-Lithium-Ion-Cordless-3-8-in-Crown-Stapler-Kit-W-1-1-5Ah-Battery-Charger-Bag-2447-21/302652899
Contact Me:
[email protected]
Other Video Platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Reviewing the Skil 12V and Milwaukee 12V inflators and going over the key features. I also do a test head to head and see how well these inflators do at inflating pickup truck tires.
Amazon Affiliate Links:
Skil Inflator (Tool Only, $49): https://amzn.to/2UmnyW8
Milwaukee Inflator (Tool Only, $99): https://www.homedepot.com/p/Milwaukee-M12-12-Volt-Lithium-Ion-Cordless-Compact-Inflator-Tool-Only-2475-20/304768834
Contact Me:
[email protected]
Other Video Platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
The final video in the Torque Test Tuesday series. We test the Metabo 18v Brushless impact driver with a 3.0ah and 8.0ah batteries. I also include a chart of all the tools tested at the end of the video with their torque values and price.
Amazon Affiliate Links:
AC Delco Torque Meter: https://amzn.to/3jWYpKn
Isotunes headphones: https://amzn.to/3jRh7D8
Contact me:
[email protected]
Other video platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Going over my new 2021 Kia Sorento EX X-line. I go over some of the key features and the reasons why I got rid of my truck for a suv. I also show the cargo space in the rear and its ability to to haul lumber inside.
Contact Me:
[email protected]
Other Video Platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Testing for the torque values of the Milwaukee m18 impact driver.
Amazon Affiliate Links:
AC Delco Torque Meter: https://amzn.to/3jWYpKn
Isotunes headphones: https://amzn.to/3jRh7D8
Milwaukee impact driver: https://www.homedepot.com/p/Milwaukee-M18-18-Volt-Lithium-Ion-Cordless-1-4-in-Hex-Impact-Driver-Kit-with-One-3-0Ah-Battery-Charger-and-Bag-2656-21P/304138981
Contact me:
[email protected]
Other video platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Batching out 18 Wood crates for a craft show. I show you some of the ways I assemble my crates and my process for batching them quickly.
Material List:
(27) 1x4x8’
(13) 1x3x8’
(8) 1x2x8’
4’x8’x1/4” plywood
(2) Kreg screws 1 1/4”(500)
T50 3/8” crown staples
Amazon Affiliate Links:
impact driver: https://amzn.to/3lCHors
Drill driver kit: https://amzn.to/3AIlAyP
Milwaukee Stapler: https://www.homedepot.com/p/Milwaukee-M12-12-Volt-Lithium-Ion-Cordless-3-8-in-Crown-Stapler-Tool-Only-2447-20/302652845
Contact Me:
[email protected]
Other Video Platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Testing for the torque values of the Masterforce 20v impact driver.
Amazon Affiliate Links:
AC Delco Torque Meter: https://amzn.to/3jWYpKn
Isotunes headphones: https://amzn.to/3jRh7D8
Masterforce impact driver: https://www.menards.com/main/tools/power-tools/power-drills-impact-drivers/masterforce-reg-20-volt-brushless-cordless-1-4-impact-driver-kit/5740-1/p-1497525414825-c-9072.htm?tid=-8875498909654348909&ipos=27
Contact me:
[email protected]
Other video platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Pushing the Skil 12v 5 1/2” circular saw to its limits with a 4.0amp battery. I was able to get over 100 cuts through a 2x6 framing stud!
Amazon Affiliate Links:
Skil 12v Circular Saw kit: https://amzn.to/3xMMm7h
Skil 4.0amp Battery: https://amzn.to/3k0JqPF
ISO Tunes Headphones: https://amzn.to/3jRh7D8
Contact Me:
[email protected]
Other Video Platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Testing for the torque values of the Milwaukee M12 impact driver. I also compare the different torque values between a 2.0 and 3.0amp battery.
Amazon Affiliate Links:
Milwaukee M12 Impact Driver: https://amzn.to/37Pp2LB
AC Delco Torque Meter: https://amzn.to/3jWYpKn
Isotunes headphones: https://amzn.to/3jRh7D8
Contact me:
[email protected]
Other video platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Testing the torque values of Skil’s 12v Impact Driver.
Amazon Affiliate Links:
Skil 12v Impact Driver: https://amzn.to/3lCHors
AC Delco Torque Meter: https://amzn.to/3rP34Bw
ISO Tunes Pro: https://amzn.to/37h6l3j
Contact me:
[email protected]
Other video platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Testing the torque values of Skil’s 12v Right Angle Impact Driver.
Amazon Affiliate Links:
Skil 12V Right Angle Impact Driver: https://amzn.to/3il1AvT
AC Delco Torque Meter: https://amzn.to/3rP34Bw
ISO Tunes Pro: https://amzn.to/37h6l3j
Contact me:
[email protected]
Other video platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
A quick video of me building a second garbage cabinet with some slight modifications compared to the first one. This build was made with material that I was able to fit in my wife’s Kia Optima with the truck closed.
Amazon Affiliate Links:
Skil 12V Impact Kit: https://amzn.to/3ilaWGx
Milwaukee 12V Installation Driver: https://amzn.to/3z45Sx6
Kreg K3: https://amzn.to/3hGsOwx
Contact me:
[email protected]
Other video platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Going over the Masterforce 1/2” cordless impact wrench and testing it on some lug nuts.
Contact me:
[email protected]
Other video platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Building a small cat house for my two cats who like to explore the neighborhood at night. This project takes about 2 hours to complete and doesn’t require any finishes or paint if you use treated lumber.
Amazon Affiliate links:
Skil 12v Impact: https://amzn.to/3cXhGbT
Milwaukee M12 Installation Driver: https://amzn.to/2SEl6cN
Roybi 23ga Pin Nailer: https://amzn.to/3xFnkHH
Materials:
1/2”x4’x8’ sanded plywood
(5) 6’ treated dog eared fence pickets
Contact me:
[email protected]
Other video platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
My first impressions and setup of the Bosch bench top router table and the Masterforce 14 amp router. I do end up placing my older Skil router in the router table by the end of the video.
Bosch Router Table:
Masterforce Router:
Contact me:
[email protected]
Other video platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
Building an oak bench for my wife’s cousin. The overall dimensions are 30” wide, 19” deep, and 23” tall(top of dog bed). This project took roughly an hour to cut and assemble everything, and about another hour to apply stain and two coats of polyurethane.
Reekon M1 Measuring Tool: https://www.indiegogo.com/projects/m1-caliber-a-better-way-to-measure?utm_source=website&utm_medium=pa&utm_campaign=reekonmain#/
Amazon Affiliate Links:
Skil 12V Impact Kit: https://amzn.to/3v7yALd
Skil 12V 4amp Battery: https://amzn.to/2RJ8gcM
Other video platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
My first impressions and overview of the features of the reekon m1 caliber.
Reekon (indiegogo): https://www.indiegogo.com/projects/m1-caliber-a-better-way-to-measure?utm_source=website&utm_medium=pa&utm_campaign=reekonmain#/
RR Buildings Channel: https://youtu.be/QThU-dEYL4U
Other Video Platforms:
Bitchute: https://www.bitchute.com/channel/CPbEgZf8vJCR/
Odysee: https://odysee.com/@WhatTheSheet:6
Rumble: https://rumble.com/c/c-557807
YouTube: https://youtube.com/user/AustinJesus245
My initial impression of Skil’s 12v cutter tool. I mainly use this for breaking down cardboard boxes into more manageable pieces.
Cutter link: https://amzn.to/2Tgjohu
Replacement Blades: https://amzn.to/34qAnQM
Tag along as I build three 6ft long raised garden beds for Mother’s Day. This is a super simple build and can be easily made in one day and doesn’t require any finishes or sanding.
Finally building the blanket chest for my wife’s aunt. This chest is 48”L x 24”W x 24”H and cost $150 in materials/hardware.
AMAZON AFFILIATE LINKS:
Link for Pentel Graph Gear 1000 0.7mm Pencil: https://amzn.to/3nJ4wDr
Link for Pentel Graph Gear 1000 0.9mm Pencil: https://amzn.to/3gZC92K