Tin removal wire is used to absorb excess solder when removing tin and to clean the stains on the circuit board.
The tin removal effect of pure copper material is remarkable. Use a small amount of Tin removal wire to remove more solder.
Features:
1. Oxidation resistance
2. Anti-corrosion
3. Low residue
4. Good thermal conductivity
5. Small and convenient
Product Links:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1633
#ASICMiner #RepairTool #Tin #wire

The female reed terminal can be used with a rubber case and is commonly used to connect two wires. It is made of metal copper, which has good conductivity, high-temperature resistance, and corrosion resistance. The female reed terminal is suitable for power cords, jumper wire cable pins crimp, various equipment switches, electronic components, etc.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1129
#terminal #reed #zeusmining

AT24C02D-XHM-T is an EEPROM memory chip. In the process of repairing the hash board, technicians need to use the editor to properly save the code in this chip to ensure that the hash board can run normally after the repair is over.
ATH91702DMCN8170QC / ATH91902DHCN / ATH91502DMCN / ATH93602DHCN19361AK / ATH93702DMCN1937 / AT24C02D-XHM-T chips are universal and can be replaced with each other.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1566
#EEPROM #chip #hashboard

Bitmain Antminer BM1397AG/BM1397AD/BM1397AH/BM1397AI chips can be replaced with each other.
The Antminer BM1397AG chip supports the SHA256 algorithm, which can be used for BTC, BCH, and other encrypted digital currency mining, and will be used in the next-generation SHA256 algorithm of the new Antminer S17 and T17.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=230
#BM1397 #BM1397AG #ASICchip #Antminer17

MP2019 SOP8 is the product number to the linear regulator MP2019 series. 40V 300mA, Low Quiescent Current Adjustable Output Linear Regulator.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1109
#MP2019 #SOP8 #ASICMiner #HashBoard

SGM2036-ADJ Applications: Antminer hash board, Modems, MP3 Players, Cellular Telephones, PCMCIA Cards, Palmtop Computers, Portable Electronics.
The SGM2036-ADJ features low power consumption, and low dropout voltage, and can operate from an input voltage range of 1.6V to 5.5V while delivering up to 300mA of output current. It is the best choice for low voltage, low power applications.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1142
#SGM2036ADJ #sgm2036 #SOT23-5 #Antminer #hashboard

Avalon 1066 hash board 2*10 Pin IO interface is used for AvalonMiner 1066 hash board repair. When connecting the hash board and the power module unit, use a data cable to connect the power module unit and the io interface soldered on the hash board, then the data can be transmitted.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1479
#Avalon1066 #hashboard #IOinterface

CAPACITOR 10uF 25V is used in the DC pulsating current of electronic equipment such as control boards, hash boards, TV sets, communications, computers, etc.
Electrolytic capacitors are a type of capacitors. The metal foil is the positive electrode (aluminum or tantalum), the oxide film that is close to the metal is the dielectric, and the cathode is composed of a conductive material, an electrolyte (the electrolyte can be liquid or solid) and other materials.
Type: Aluminum Electrolytic Capacitor
Capacitor: 10uF
Working voltage: 25V
Maximum temperature: 105°C
Product details:
1. Ripple current resistance
2. High and low-temperature resistance
3. Long service life
4. Aluminum electrolytic material
Product Links:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1684
#CAPACITOR #controlboard #hashboard

Antminer S17+ Refit Heat Sink Tool Kit is used to help install the Antminer S17+ upgrade heat sink. Using the upgraded heat sink can avoid the problem that the heat sink of the hash board often falls off and causes damage to the ASIC chip. This package can significantly improve the miner's performance and enhance the ability to obtain coins.
This kit contains: a tin removal stencil, thermal paste stencil, hash board frame, nut tin tool, and tin scraper.
Product Details:
1. Antminer S17+ Refit Heat Sink Tool Kit: https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1786
2. Antminer S17+ upgrade heat sink:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1291
#Antminer #S17+ #HeatSink #ToolKit

330 6240k tantalum capacitor is a high-temperature resistant capacitor, suitable for hash board voltage domain and PSU high-temperature circuit for maintenance.
SMD Panasonic polymer tantalum capacitors Product details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1104
#330 #6240k #Tantalum #Capacitor #hashboard #voltage

The A3205N chip is often used to repair the Avalon hash board. If there is a problem with the hash board's hashrate, these chips need to be checked.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1924
#Avalonminer #A3205N #Chip #hashboard

LM317BD2TR4G is a voltage regulator. Capable of delivering over 1.5A over an output voltage range of 1.2V to 37V. The maximum value of its internal short-circuit current varies with the chip temperature. LM317BD2TR4G is a chip with high safety factor and easy installation.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=875
#LM317BD2TR4G #voltage #regulator

Used Ebang Ebit Control Boards for Sale. It is used to repair Ebit E9i miners that are not functioning properly due to broken control boards. All control boards are strictly tested before shipment to ensure that each product can function properly.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1289
#Ebang #Ebit #E9i #controlboard #repair

The Antminer L7 control board is responsible for collecting and processing the data sent by the L7 hash board. Maintenance personnel needs to prepare spare control boards to avoid losses due to damage to the control boards. Bulk orders are accepted and rigorous testing is performed before shipment to ensure that the control board can work properly.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1631
#AntminerL7 #controlboard #zeusmining

AvalonMiner 4pin fan simulator has two ports and adopts dual-chip technology for better stability and stronger compatibility. The speed can be simulated automatically through the commands issued by the miner without noise. AvalonMiner fan simulator 4pin is suitable for miners with special interfaces such as Avalon 920, 921, 911, 910, 1066, 1166, 1246, etc.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1636
#Avalon #A1246 #Fan #Simulator

The Avalon A3205NF chip is an ASIC chip on the AvalonMiner Hash board. The ASIC chip is an important part of the miner hash board, which is related to the data operation of the entire hash board. If the ASIC chip is damaged, it must be replaced in time so as not to affect the operation of miners.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1989
#Avalon #ASICchip #A3205NF #hashboard

T1558 ASIC chip suitable for replacing old faulty non-working ASIC chip on INNOSILICON T1/T2, Halong Mining DragonMint T1/T2, Cheetah F1/F3/F5M, LoveMiner A1, Bitfily Snow Panther B1+/B3 miners.
Brand new high-quality T1558 ASIC chip, Good quality, and fast shipping.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1320
#T1558 #ASICchip #INNOSILICON #zeusmining

QN3109 MOSFET is a step-down converter and also one of the easily damaged parts on the hash board. If QN3109 chip damage will affect the operation of the entire DC step-down circuit.
Features:
1. Advanced high cell density Trench technology
2. Super Low Gate Charge
3. Green Device Available
Applications:
1. High Frequency Point-of-Load Synchronous Buck Converter for MB/NB/UMPC/VGA
2. Networking DC-DC Power System
3. Load Switch
qn3109m6n Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1123
#QN3109 #MOSFET #chip #DC #step-down #circuit

APW12 overclocking power supply is an oil cooling dedicated power supply for Antminer 19 series miners, S19 S19Pro. Double voltage input, Low noise, high stability, and long service life.
Product Details:
1. Antminer APW12 6000W overclocking oil-cooled PSU：
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=2198
2. Antminer APW12 8000W overclocking oil-cooled PSU:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=2199
#APW12 #oil #powersupply #Antminer19 #ASICminers

NCP114ASN180T1G is used for the ASIC Miner hash board. It is a linear voltage regulator chip.
NCP114ASN180T1G CADHLQ CADMIZ CADMHY / ncp114asn180t1g 50 300mA SOT23-5 Linear Voltage Regulators
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1143
#ASICMiner #hashboard #chip #voltage #zeusmining

MP3426DL is the boost converter of the Innosilicon T2 hash board. When the circuit doesn't generate a boost, it's largely because this chip is faulty.
Features & Benefits
1.6A, 90mΩ, 45V Power MOSFET
2. Uses Very Small Capacitors and Inductors
3. Wide Input Range: 3.2V to 22V
4. Output Voltage as High as 35V
5. Programmable FSW: 300kHz to 2MHz
6. Programmable UVLO, Soft-Start, UVLO Hysteresis
7. Thermal Shutdown 160°C
8. Available in 14-Pin 3mm×4mm QFN Package
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1182
#MP3426 #MP3426DL #InnosiliconT2 #hashboard #zeusmining

The sgm3750 is a 650kHz boost converter for driving series LEDs. It can be used in the boost circuit of the hash board. The chip integrates LED open circuit protection, preventing the chip from being damaged due to overvoltage under LED open circuit conditions.
It is packaged in a green TDFN-2×2-6L technology, with an operating temperature range of -40°C to +85°C and an operating voltage between 2.7V and 20V.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1530
#SGM3750 #chip #hashboard

It`s suitable for anti-static self-adhesive protection of hash board, control board, adapter board, power board, chip, resistor, capacitor, patch, cable, data cable, etc.
Anti-static PVC plastic wrapping film is used to wrap small electronic components or circuit boards to prevent dust layers and scratches.
Specification:
Product material: PVC polyvinyl chloride
Product diameter: 3cm
Product thickness: 25um
Product color: transparent
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1637
#PVC #hashboard #powerboard #chip #resistor #patch

The 24.000 crystal oscillator is the clock crystal oscillator on the Whatsminer M21S hash board. The CLK signal will be in error due to crystal failure. If it is not replaced in time, it will affect the normal mining of miners.
Product Details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1957
#crystal #oscillator #hashboard #M21S

CBB22 225J 450v capacitor is a metalized polypropylene film capacitor. It is not accessible to damage, has excellent performance, and has low power consumption. This capacitor is wrapped with a protective film made of flame retardant, insulating material. It is suitable for various electronic devices such as meters, TV sets, etc.
Product details:
https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=2147
#CBB22 #225J #450V #capacitor