Programming an ATTiny10 Using an Arduino

The ATTiny10 is a small 6 pin micro-controller with an 8 bit processor, 1k programming memory, 8 bit ADC, and one timer for PWM outputs. Three pins are for power, ground, and RESET which leaves three useful pins (RESET can be used as a i/o pin but re-programming is more involved). However, three pins can do a lot; simple control, signal conditioning, basic timing, switching . . .
This is a demonstration of programming an ATTiny10 using Atmel Studio to generate a hex file and an Arduino to upload the file into the ATTiny10; a method described at junkplusarduino.blogspot.com. (10/12/14)