Click to copy, then share by pasting into your messages, comments, social media posts and websites.
Click to copy, then add into your webpages so users can view and engage with this video from your site.
Report Content
We also accept reports via email. Please see the Guidelines Enforcement Process for instructions on how to make a request via email.
Thank you for submitting your report
We will investigate and take the appropriate action.
How to make powerful firecracker flash powders and fine magnesium aluminum powder
This video i made special catalysed flash powders for firecrackers (Petard) and fine powdered magnesium and aluminium powder with household materials.I will test the flash powders sensytivity,stability,and power.I will coat the magnesium with linseed oil than dry to get strength coating for protect it from the another mixed chemicals.I will show you how mutch extra power gives the flash powder if you use extra catalyst like sulphur.
This flash powder made from home made aluminium and magnesium.The magnesium powder made water heater anode (this is 75% Mg 25% Al) and the aluminium powder made aluminium foil and grinded a poppy seed grinder.The water heater anode burnish with sand paper.The fine podwered metal podwers made a granite (or satinless steel better) plate and bar (Stamp Process).The metal particles are only ground when they are a single layer between the two surfaces, and only a very tiny portion of two round surfaces are close enough to eachother.
If either component but especially the metal powders are not enough fine ,the flash powders will burning slowly.This flash powders works the best with 400 mesh and much more finer magnesium powder and 3-4 micron dark aluminium powder.If you want the best result always buy and use the possible most finest particle size metal powders.
Catalysed flash powders ratio for firecrackers:
Normal Kno3 Petard flash:
Postassium Nitrate/Magnesium/sulfur Kno3 Mg s 50/40/10%
Extreme strong with bigger effect:
Postassium perchhlorate/Magnesium/sulfur Kclo4 Mg s 50/40/10%
Extreme strong:
Postassium perchhlorate/Aluminium/sulfur Kclo4 Al s 50/40/10%
Normal strong very bright:
Barium Nitrate/Magnesium/sulfur Bano3(2) Mg s 50/40/10%
Normal strong (stronger than kno3) big effect:
Postassium permanganate/Aluminium/sulfur KMNO4 Al s 60/30/10% (6/3/1)
Catalysed flash powders are mutch stronger than normal flash powders.The magnesium based flash powders are coated with linseed oil to protect the magnesium powder.
My website with more description: https://mx5-kevin.blogspot.com or https://sufnipiro.wordpress.com
Thether USDT and BNB BEP20 or (Matic Polygon) small amount donation to support projects: 0x16829457123552A574441bf38Eeaf93B46105A1d
Visit the decentralized pyrotechnic community on ZeroNet (Chemistry and pyrotechnic forum,file,video share,zite index and selfmade pyro zites.And Create your own uncensored pyrotechnic site.
http://127.0.0.1:43110/1JArw6Qb7cG6NuZBqvBSprURr2aaZdCFq9/
Using the ZeroNet software https://zeronet.dev
More info from decentralized pyro zites:
https://steemit.com/chemistry/@mx5kevin/decentralized-chemistry-and-pyrotechnics-forum-on-zeronet
Category | Science & Technology |
Sensitivity | Normal - Content that is suitable for ages 16 and over |
Playing Next
Related Videos
How to make strong firecrackers at home
1 year ago
Warning - This video exceeds your sensitivity preference!
To dismiss this warning and continue to watch the video please click on the button below.
Note - Autoplay has been disabled for this video.