You are about to action:
Object being modified by the action
Do you want to proceed?
If you wish to action:
Object being modified by the action
Then please send an email request to [email protected].
LIKE / SHARE / FAVE!
Amazon Store - https://www.amazon.com/s?k=NicTaylor&ref=bl_dp_s_web_0
Ebay Store - http://stores.ebay.com/Taylor-Tactical-Supply?_trksid=p2047675.l2563
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Many folks have asked for a follower that adds capacity to the factory magazines for the Mosquito and FireFly 22LR pistols that lock the slide open on last shot fired. Up until now all that was available was our Shockbottle follower that does add 4 extra rounds, but did not lock the slide on an empty mag. That has all changed now. The NicTaylor follower for the Sig Sauer Mosquito and the its clone the German Sport Gunworks FireFly will now lock the slide open on last shot fired. Like many of the other followers from Taylor Tactical Supply, this follower locks the slide back by engaging the bolt face of the slide like an AR15 22 conversion magazine. It is recommended for the best performance to turn the magazine spring backwards in the mag tube to give the rear of the follower that extra kick to engage the slide. If you do not turn the spring backwards, the slide may not lock open.
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
LIKE / SHARE / FAVE!
Amazon Store - https://www.amazon.com/s?k=NicTaylor&ref=bl_dp_s_web_0
Ebay Store - http://stores.ebay.com/Taylor-Tactical-Supply?_trksid=p2047675.l2563
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles - https://plus.google.com/+nictaylor00/posts
Skeletonized flat trigger for AR type rifles and variants. The Bullmoose flat trigger is a drop in replacement trigger that works with milspec fire control components and is designed to lighten your trigger pull for a precision rifle feel at a fraction of the cost. The flat trigger surface provides an even and consistent trigger pull where ever the operators finger is placed. 4.5-5.5lb trigger pull with milspec springs.
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
LIKE / SHARE / FAVE!
Amazon Store - https://www.amazon.com/s?k=NicTaylor&ref=bl_dp_s_web_0
Ebay Store - http://stores.ebay.com/Taylor-Tactical-Supply?_trksid=p2047675.l2563
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles - https://plus.google.com/+nictaylor00/posts
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
LIKE / SHARE / FAVE!
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
Thank You for the LIKE and please share the video!
Nic
LIKE / SHARE / FAVE!
Amazon Store - https://www.amazon.com/s?k=NicTaylor&ref=bl_dp_s_web_0
Ebay Store - http://stores.ebay.com/Taylor-Tactical-Supply?_trksid=p2047675.l2563
Other Video Hosting more friendly to free speech:
https://gunstreamer.com/@NicTaylor00
https://videos.utahgunexchange.com/@NicTaylor00
https://www.bitchute.com/channel/nictaylor00/
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles - https://plus.google.com/+nictaylor00/posts
This is a magazine kit for the Smith & Wesson M&P22 Compact pistol that allows you to get more rounds in the factory magazine. This kit is not permanent and can be installed in a matter of minutes. You can easily convert your magazine back to it's factory configuration if you ever have the need or you move to a location like California that does not allow these parts.
The kit is comprised of an aluminum basepad, magazine spring, Hi-Viz NicTaylor follower and a hex wrench for attaching the basepad to the magazine tube. Once you disassemble your factory magazine you will only use the magazine tube. Install the follower, compress the included magazine spring and slide on the basepad. Take the included hex wrench and finger tighten the set screw on the bottom of the basepad. DO NOT OVER TIGHTEN.
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
Get it here: https://www.taylor-tactical-supply.com/sw-mp22c-16rd-bp-p/200-16bp-0mpc.htm
We have more high capacity 22LR magazine parts on our website at https://www.taylor-tactical-supply.com
LIKE / SHARE / FAVE!
Amazon Store - https://www.amazon.com/s?k=NicTaylor&ref=bl_dp_s_web_0
Ebay Store - http://stores.ebay.com/Taylor-Tactical-Supply?_trksid=p2047675.l2563
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles - https://plus.google.com/+nictaylor00/posts
This is a magazine kit for the Smith & Wesson M&P22 Compact pistol that allows you to get more rounds in the factory magazine. This kit is not permanent and can be installed in a matter of minutes. You can easily convert your magazine back to it's factory configuration if you ever have the need or you move to a location like California that does not allow these parts.
The kit is comprised of an aluminum basepad, magazine spring, Hi-Viz NicTaylor follower and a hex wrench for attaching the basepad to the magazine tube. Once you disassemble your factory magazine you will only use the magazine tube. Install the follower, compress the included magazine spring and slide on the basepad. Take the included hex wrench and finger tighten the set screw on the bottom of the basepad. DO NOT OVER TIGHTEN.
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
After burning over 1000 rounds of 22 ammo in my new Taurus TX22, I've come to the realization that my point of impact is about six inches high at 25 yards. So I went to the Dawson Precision website and entered the spec of my TX-22 on the "Sight Match" link and the calculator spit out the suggested front sight height for my deviation. I ordered one of the Glock front sights for my TX22 since the mounting method use in both the Glock and TX22 are very similar. Turns out the Glock front sight can be installed on your TX22 with just a few modifications to the sight itself. Please keep in mind that modifying a part like this voids the possibility of returning it. So if you lost your front sight or you are not hitting at your point of aim, consider installing a Glock front sight from your favorite retailer.
LIKE / SHARE / FAVE!
Amazon Store - http://astore.amazon.com/nisrrrere-20
Ebay Store - http://stores.ebay.com/Taylor-Tactical-Supply?_trksid=p2047675.l2563
Other Video Hosting more friendly to free speech:
https://gunstreamer.com/@NicTaylor00
https://videos.utahgunexchange.com/@NicTaylor00
https://www.bitchute.com/channel/nictaylor00/
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://[a]www.facebook.com%2FNicTaylor00[/a]
Twitter - https://twitter.com/nictaylor00
Instagram - https://[a]www.instagram.com%2Fnictaylor00%2F[/a]
Pinterest - https://[a]www.pinterest.com%2Fthenictaylor00%2F[/a]
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
LIKE / SHARE / FAVE!
BiFocal Shooting Glasses on Ebay: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337856963&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FC2-Top-Focal-Bottom-Bifocal-Safety-Glasses-Black-Frame-Various-Lens-Options-%2F372474493313%3Fvar%3D%26hash%3Ditem954f0c7c63
My Daily BiFocal Sunglasses ($10) https://amzn.to/2DB92zE
Amazon Store - http://astore.amazon.com/nisrrrere-20
Ebay Store - http://stores.ebay.com/Taylor-Tactical-Supply?_trksid=p2047675.l2563
Other Video Hosting more friendly to free speech:
https://gunstreamer.com/@NicTaylor00
https://videos.utahgunexchange.com/@NicTaylor00
https://www.bitchute.com/channel/sdescwyesSwv/
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
At the time of this video I've been using the Walkers Electronic Earbuds for almost two years. I mainly use them for USPSA and IPSC pistol shooting competitions and Dove Hunting. I've found these little gems at a price point anyone should be able to afford when you compare the cost of hearing loss.
In the Texas heat where I reside, wearing ear muffs either passive or electronic are not an option for me due to the heat these muff conceal. This is where either straight up cheap foam ear plugs come into play or better yet, electronic noise cancelling earbuds such as these. You can spend anywhere from $100 to thousands of dollars on electronic ear protection. In the end I found these a nice price for the function.
Walkers Silencer Electronic Earbuds: https://amzn.to/2z9FqWl
Extra Batteries: https://amzn.to/2DfEWAK
Foam Ear Tips I like Best: https://amzn.to/2JYBf3Y
Foam Ear Tips (too small for me) https://amzn.to/2Fst3KO
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Support our Channel by shopping for gun accessories and high capacity magazine kits at: https:[a][a]www.Taylor-Tactical-Supply.com%5B%2Fa%5D[/a]
Get the OLIGHT PL-MINI Valkyrie here: http://bit.ly/2A5fKxa
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Official description from OLIGHT:
The PL-MINI Valkyrie is a culmination of years of innovation at Olight in the LED industry to bring you the brightest and most compact weapon flashlight ever created.
At only two ounces, the flashlight will never cause the user to adjust their bore height or grip on the firearm producing a more consistent integration into their shooting system.
The 400-lumen output is the perfect match of intense brightness and maintaining focus on your target. The 2.41-inch length allows for the light to not reach passed the barrel of a standard compact pistol for maximum concealability. We also integrated our signature magnetic rechargeable system into the light.
Use the included MCC magnetic charging cable to charge the light either quickly at home or in the field. The PL-MINI is the perfect choice for practical concealed gun carry on any compact pistol due to its unmatched brightness and portability.
FEATURES
Compact and lightweight, width and length perfect for compact pistols making it easily concealable.
960mAh built-in lithium polymer battery pushing a maximum output of 400 lumens.
Incorporates the OLIGHT signature magnetic charging system for maximum convenience. Can be powered by all common USB power sources.
Manual quick attach and release mounting system
Both Glock rail (adapter installed on the product) and Picatinny rail compatible (included in the package)
Low power warning indicator
Hit the switch downward to turn on minimizing accidental triggering when put into a holster
Output modes: momentary-on, constant on
TECHNICAL DETAILS:
Beam Distance (ft): 246
Beam Distance (m): 75
Max. Performance (lumens): 400
Charge type: Magnetic USB charge base
Compatible Batteries: Customised Li-Ion Battery
Light Intensity (candela): 1400
Light Form: Standard hotspot diameter with impressive distance. The perfect all-around beam profile.
Lens / Reflector Type: Smooth reflector (central area and flood area)
Mode Operation: Side Switch
Form/Size Factor: Small size (Car key / Zippo Lighter)
Series: Series PL (gun flashlight)
Unique Characteristics:
1) ambidextrous switch that can be only side pressed (from up to down)
2) smallest pistol flashlight with recharging function
3) narrow and simple design perfect for IWB carry
Run-time : 400lumens (~60lm); 1h10m (1m)
Strobe: No
SOS / BEACON: No
TECHNICAL CHARACTERISTICS
Waterproof: IPX6
Weight (g / oz): 62 / 2.19
Length (mm / in): 61.2 / 2.41
Head Diameter (mm / in): 31.2 / 1.23
Body Diameter (mm / in): 26.9 / 1.06
Led: Cree XP-L HI
Packaging: Carton box
Use: Police, military, tactical use
PACKAGE CONTENTS
Flashlight x 1
Magnetic charger USB cable x 1
260mAh built-in lithium polymer battery
1913 Rail Mount (for 1913 Rail) x 1
T6/T8 Socket Head Wrench x 1
Instruction Manual
Music by TeknoAXE, "Cover Blown" [a]http%3A%2F%2Fyoutu.be%2FKjai-kvSvH4[/a]
Here's my honest look at the Beretta APX 9mm striker fired pistol
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
Using the KCI 100 round drum mag
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
Here is an honest Review of the slidefire bump stock soon to be banned. This video has already been banned on YouTube for violating its community guidelines. After an inquiry to YouTube with no response on why this video was removed from youtube, I have come to the conclusion that the must think the video is inciting violence. Why are Hollywood movies glorifying illegal machine guns and killing people OK on Youtube but an instructional video is not?
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
LIKE / SHARE / FAVE!
You can support us by shopping for your gun parts and accessories at https://www.Taylor-Tactical-Supply.com
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
DEZ Arms (AR15 Barrels) http://www.shop.dezarms.com
Here is a little "B ROLL" footage of my son who is 7 years old at the time shooting my 3-gun rifle at 400 yards using Wold Steel Cased Ammo with the Primary Arms 1-6x Scope with ACSS Reticle. If you are looking for a scope for your AR Type rifle, you need to take a serious look at this scope and it's ease of shooting at distance.
I have been testing this scope for a few years now. Here is a post from December 2013 showing a picture of the steel target I show in the beginning of the video: http://nictaylor00.blogspot.com/2013/12/zeroing-my-new-scope-for-3-gun.html
It was over three years ago when I was first contacted by Dimitri at Primary Arms. He had a new reticle and was wanting some feedback on it. I was told this reticle was mainly designed for combat situations and being a civilian in the competition arena, I was a bit unsure if it would fit my needs so I passed on buying one of the scopes and Dimitri never offered to send me one for free.
Later I ended up getting one after getting frustrated with Mil-Dot scopes. I must have bought one of the 1st production runs since it had to be sent back due to a loose eyebell. The second one took many months to receive and was clearly a different production since there was obvious cosmetic changes from the first. This second scope would not hold zero for me so I sent it back too. The third scope is the one seen in this video and so far has worked well. However, from my testing it appears that over 400 yards the ranging reticle does not seem to be calibrated for my 16 inch carbine. From 100 to 400 yards the reticle is dead on. After that, you need some Kentucky windage.
The wrench in the machinery comes with using the scope on a 20 inch rifle where the reticle appears to be dead on for 100 through 600 yards. Note that the reticle goes up to 800 yards but I did not have an opportunity to shoot beyond 600 yards. So is the reticle only good for rifles with a 20 inch barrel?
OBSERVATIONS:
Coming from a non combat point of view but rather a 3-gun competition angle... I'd like to the range finding tools to be redesigned or standard IPSC targets or something of the like. The current range finding tools found etched in the scope is for a man sized target.
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
LIKE / SHARE / FAVE!
My write up on the Primary Arms 1-6x scope with ACSS reticle: https://nictaylor00.blogspot.com/2014/04/primary-arms-1-6x-scope-fool-proof.html
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
DEZ Arms (AR15 Barrels) http://www.shop.dezarms.com
I have been testing this scope for a few years now. Here is a post from December 2013 showing a picture of the steel target I show in the beginning of the video: http://nictaylor00.blogspot.com/2013/12/zeroing-my-new-scope-for-3-gun.html
It was over three years ago when I was first contacted by Dimitri at Primary Arms. He had a new reticle and was wanting some feedback on it. I was told this reticle was mainly designed for combat situations and being a civilian in the competition arena, I was a bit unsure if it would fit my needs.
I must have gotten one of the 1st production runs since it had to be sent back due to a loose eyebell. The second one took many months to receive and was clearly a different production since there was obvious cosmetic changes from the first. This second scope would not hold zero for me so I sent it back too. The third scope is the one seen in this video and so far has worked well. However, from my testing it appears that over 400 yards the ranging reticle does not seem to be calibrated for my 16 inch carbine. From 100 to 400 yards the reticle is dead on. After that, you need some Kentucky windage.
The wrench in the machinery comes with using the scope on a 20 inch rifle where the reticle appears to be dead on for 100 through 600 yards. Note that the reticle goes up to 800 yards but I did not have an opportunity to shoot beyond 600 yards. So is the reticle only good for rifles with a 20 inch barrel?
OBSERVATIONS:
Coming from a non combat point of view but rather a 3-gun competition angle... I'd like to the range finding tools to be redesigned or standard IPSC targets or something of the like. The current range finding tools found etched in the scope is for a man sized target.
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
You can support our Channel buy shopping for your Gun Accessories at https://www.Taylor-Tactical-Supply.com
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Part 2 of a two part series on reloading the 50 caliber Action Express most commonly used in the Desert Eagle pistols.
This is a very basic video and the concept and steps shown here can be applied to other calibers. I hope this video sheds some light on reloading for the viewers that are not familiar with the process.
The book used is the Lyman Reloading Handbook, 49th Edition
Be sure and see the review of the Desert Eagle 50AE:
https://www.bitchute.com/video/mb4O7kAfCsNi/
You can support our Channel buy shopping for your Gun Accessories at https://www.Taylor-Tactical-Supply.com
RELOADING THE 50AE Part 2: https://www.bitchute.com/video/rFXdObH2LEse/
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Part 1 of a two part series on reloading the 50 caliber Action Express most commonly used in the Desert Eagle pistols.
This is a very basic video and the concept and steps shown here can be applied to other calibers. I hope this video sheds some light on reloading for the viewers that are not familiar with the process.
The book used is the Lyman Reloading Handbook, 49th Edition
Be sure and see the review of the Desert Eagle 50AE:
https://www.bitchute.com/video/mb4O7kAfCsNi/
LIKE / SHARE / FAVE!
Support our channel at https://www.Taylor-Tactical-Supply.com
Amazon Store - https://astore.amazon.com/nisrrrere-20
Ebay Store - https://stores.ebay.com/Taylor-Tactical-Supply?_trksid=p2047675.l2563
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
LIKE / SHARE / FAVE!
You can support our Channel buy shopping for your Gun Accessories at https://www.Taylor-Tactical-Supply.com
Amazon Store - http://astore.amazon.com/nisrrrere-20
Ebay Store - http://stores.ebay.com/Taylor-Tactical-Supply?_trksid=p2047675.l2563
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
You've all seen them on TV, the movies, videos games, and on YouTube. But not many people have actually seen or fired one in person. You asked for it, so here it is.
This quick video goes over the basics of the Desert Eagle 50 Action Express (AE) XIX and I toss in a bonus with the Freedom Arms model 555 cowboy revolver. These guns are big, heavy and not really practical when it comes to usefulness and economy of shooting. Plus they recoil like a mother! But with a descent grip they can be handled quite well.
Be sure and see my video(s) on reloading the 50AE for these guns:
RELOADING THE 50AE Part 1: https://www.bitchute.com/video/R794lCCU5CiH/
RELOADING THE 50AE Part 2: https://www.bitchute.com/video/rFXdObH2LEse/
LIKE / SHARE / FAVE!
Get the Colt 1911 22LR Magwell Here: https://www.taylor-tactical-supply.com/category-s/152.htm
Brass Punch Set: http://amzn.to/1M9uI5p
More 22 Rimfire Parts at http://www.22LRupgrades.com
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Please join me on Facebook for additional pictures:
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
The Colt 1911-22 pistols have many interchangeable parts with standard 45 ACP pistols. However, the magwell is not one of them. The factory 22lr magazine has a wider basepad than your typical 45ACP single stack mag and therefore all after market magwells designed for 1911's will not fit the Colt 1911-22 pistol made by Walther / Umarex. Our magwell is designed specifically for the Colt 1911 22LR pistols so that factory magazines and magazines equipped with NicTaylor00 / Shockbottle basepads and magazine upgrades will fit in the gun.
Our magwell comes with an aluminum main spring housing, main spring housing pin retainer, and main spring cap retainer pin. The magwell and main spring housing are constructed of anodized aluminum and machined to close tolerances for a clean fit. Some fitting may be required.
INSTRUCTIONS:
1. Remove factory main spring housing.
2. Push out roll pin used to retain the factory main spring in the factory main spring housing.
3. Retain the main spring and the main spring cap.
4. Insert the included main spring housing pin, the the main spring and finally the factory main spring housing spring cap into the included light weight aluminum main spring housing.
5. Compress all parts listed in step 4, and while compressed insert the main spring cap retainer pin into the main spring housing.
6. With the hammer down, Insert the assembled main spring housing into the pistol.
7. Insert the factory main spring housing pin into the frame to secure the main spring housing.
8. Verify that the grip safety functions properly with the new main spring housing.
9. Screw into place the magwell with the included 8-32 screw using a 5/64" hex wrench. Tighten at approximately 15 inch-lbs
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
Purchase Here: https://www.taylor-tactical-supply.com/Dillon-Powder-Bar-Finger-Adjustment-Knob-p/dillon-pb.htm
Detailed write up on the Taylor Tactical Suppy powder thrower finger adjustment screw knob for the Dillon Precision Reloading presses: https://nictaylor00.blogspot.com/2018/07/dillon-reloading-press-powder-thrower.html
SOCIAL MEDIA:
Join Me on Gun District: https://gundistrict.com/profile/6901
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Instagram - https://www.instagram.com/nictaylor00/
Pinterest - https://www.pinterest.com/thenictaylor00/
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
This easy to install screw assembly replaces the factory powder adjustment screw. The Dillon Factory screw requires a wrench when adjusting the amount of powder to dispense in your powder thrower. The knurled knob is labeled with graduations for orientation and easily allows the user to hand adjust the powder dispenser without the need for tools. Works on Dillon1050, 650, 550, SDB and 900 presses. Dillon Powder Bar is shown only for reference and is not included.
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
See Our Website for This Reduced Hammer Spring and more: https://www.taylor-tactical-supply.com/
Ghost Gun 80% Lower: http://nictaylor00.blogspot.com/2013/07/80-ar15-lower-making-ar-15-without.html
Poor Man's Trigger Job: http://nictaylor00.blogspot.com/2014/10/ar15-mil-spec-trigger-adjustment-grip.html
22 Rimfire Upgrades for various pistols: https://www.22LRupgrades.com
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Please join me on Facebook for additional pictures:
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
One of the easiest and least expensive ways to reduce the weight of the trigger on your AR15 rifle is to replace the stock hammer spring with a Reduced Power Spring. All you need is a punch or hex wrench small enough in diameter to push out the hammer pin located in your AR15 lower. Once you push out the hammer pin, the hammer and spring can be removed from the lower. Take note of the orientation of the spring as it sits on the hammer so that you can install the new spring in the same position.
Simply pull the spring off the hammer by grabbing one of the coils and pull. Install the Reduced Power Spring onto the hammer and reinsert the hammer/spring into the lower while pushing the hammer pin back into place through the lower. Be careful not to force the pin as you attempt to push it through the lower. Remember the lower is aluminum and the pin is steel, so forcibly hitting the pin or pushing harshly it may cause damage to your lower if all is not lined up perfectly.
In our testing we were able to reduce the trigger pull weight by 3 pounds. Our stock trigger was measuring 7 pounds with the mil-spec hammer spring found in all Lower Parts Kits (LPK). Once we installed the Reduced Power Spring, our same trigger measured 4 pounds of pull. This is a considerable amount of reduction for such a low price. Most match triggers run well over $100. Granted, this spring does nothing to reduce the creep or "grittiness" of your stock trigger like the drop-in match triggers do, but you can come close with the additional Adjustment Grip Screw Kit. For those not wanting to spend alot of money on an expensive trigger for their rifle or carbine, the Adjustment Screw and Reduced Power Hammer Spring Kit is the way to go.
Application: The Reduced Power Hammer Spring is intended for competition and recreational use only and should not be installed in any rifle used for defense or duty applications. By reducing the spring tension, the introduction of light strikes or failures to fire due to the lack of primer detonation may occur in ammunition with hard primers.
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
Purchase Adjustment Screw: https://www.Taylor-Tactical-Supply.com
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Please join me on Facebook for additional pictures:
FaceBook - https://www.facebook.com/NicTaylor00
Twitter - https://twitter.com/nictaylor00
Full Auto 80% AR Lower: http://nictaylor00.blogspot.com/2014/11/optimus-defense-80-billet-lower.html
INSTRUCTIONS:
1. The internal set screw comes with thread locker pre-applied but for best results remove the internal screw and apply additional thread locker and re install the set screw inside the
large screw. Make sure to screw down the internal screw all the way in so that the tip just protrudes.
2. Remove the factory grip screw and lock washer from the grip of your rifle. Mind the spring and detent for the safety as they may bounce out if you remove the grip completely.
3. With the hammer cocked and the gun on safe, insert the Trigger Adjustment Screw into the grip and tighten the large screw with a 3/16” hex wrench until he pistol grip is secure.
4. Using the included hex wrench, finger tighten the internal screw inside the 3/16” screw until the it stops. DO NOT OVER TIGHTEN. Backout the internal screw 1/4 turn at a time
until the safety lever can by actuated. Verify that the trigger, disconnector, hammer and safety function correctly. Let your additional thread locker dry before putting your rifle to use.
Music by TeknoAXE, "Cover Blown" http://youtu.be/Kjai-kvSvH4
Created 6 years ago.
40 videos
Category None
Please support our channel by shopping on our website https://www.Taylor-Tactical-Supply.com We carry many unique firearm parts for increased magazine capacity among a variety of other manufactures besides our own designs. My YouTube channel is one of a competition shooting and various gun and gear reviews. There are some hunting videos posted here but as they increased in quantity, I created a "Hunting Channel" on YouTube to post them instead. So for hunting videos feel free to visit http://www.TexasNative00.com and subscribe.
I've been competitively shooting for more than 20 years and hunting my entire life. Hopefully some of my "Howto" and "review" videos will help those searching for information will help them make an informed decision. Please feel free to contact me at [email protected]
Comments and questions are welcome as well as ideas for videos you would like to see.