Handicap Bathroom Remodel 2 By Support

The guys are adding the 2 bys for floor supports, getting things ready for plywood.

⏱️⏱️Chapters⏱️⏱️
00:00 Intro
00:12 Putting 2x6 to support the floor
01:15 Try to control the movement of the floor
01:35 Put screws at an angle
02:00 Going to support the floor underneath with beams
02:20 How he's going to build out the back of the shower area
03:00 Going to put plywood on that
03:40 Back after adding all the 2 bys

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: [email protected]
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

#showerremodel #bathrroomremodel #handicappedshowerremodel

Transcript:
Well, we've cut the where those lines where we cut those. That top of the joist to the center. And, right now I'm putting in boards to support this area, and I'm gonna put a two of six all the way up to the floor. This is it.

And I'm going to use the.

Three inch screw to tie it all together. I don't want any movement. So, then that crack the ceramic.

Try to control the movement as much as possible.

I’m going to put screws at an angle right through here.

All right. Now I want that I'm going to get a two by so it doesn't interfere with the bottom down here. Because I'm going to support all this from underneath with, beams that I make and support down to the ground so that this area will have a lot of support because it's going to be a wheelchair on it.

So the next thing I'm going to do is put, a two by across here, one inches down for this. This is, really, really close to be trying to cut out. And I'm go..