The reason for the development of fungus and mold is the high humidity in the room and insufficient ventilation. The air should freely carry all bacteria and infections out of the room and saturate it with oxygen. But with the development of new technologies, expensive metal-plastic windows do not give any chance to get air inside. Many people achieve this effect without knowing the consequences in the form of mold and mildew. But what to do when the first signs of these microorganisms have already appeared and is it necessary to call the service to eliminate mold and mildew?
Fighting mold and mildew
The process of destroying fungus and mold is always very difficult and time consuming. Fungus and mold spreads very quickly through a room by releasing spores into the air. If these microorganisms have appeared in closed corners, on the floor under furniture or on a closed wall, you must immediately begin to ventilate the room. After all, their spores will continue to concentrate in the room and the development of fungus and mold will accelerate many times. Before fighting fungus and mold it is necessary to eliminate the cause of their appearance:
- High % humidity (more than 60);
- Poor ventilation.
In order to protect against mold and mildew it is necessary to eliminate these two factors. And also it is necessary to do it in the process of fighting to remove fungus and mold were successful. Once these factors are eliminated, the development of microorganisms will stop for a while and give time to fight them. In general, if you divide the destruction of fungus and mold into stages, this was the first stage.
You should also not forget about the inspection of the place by specialists. It is recommended to use the services of an expert, who will exactly describe the problem and the order of combating it.
The second step can be called the treatment of the surface where the fungus and mold. This will help solidify the cleanup and make a fat point in the fight against microorganisms in your home. Mold and mildew antiseptic can also participate in this step.
And the third step is to clean the surface itself where these microorganisms have taken up residence. Initially, the surface is cleaned physically, and then chemical processes completely remove microbes and bacteria. This is done with the help of ozonation. This process is common in nature and consists in the release of ozone gas into the air. It oxidizes all living microorganisms and kills them. Treating walls for fungus and mold will take less than a day with this method. The surfaces of any room can be cleaned by Guru Restoration:
Residential, apartment, and home air ozonation
- Fungus and mold removal in the bathroom;
- Remover of fungus and mold in the basement and cellar;
- Removal of mold and mold from the wallpaper;
- Removal of mold and mold in the house and apartment;
- Removal of mold and mildew from the walls;
- Black mold removal;
- Removal of mold and mold from the ceiling;
- Removal of fungus and mold from the floor.
We recommend that you contact the Guru Restoration team of specialists who can handle your fungus and mold removal in a minimum amount of time. Reliable products and quality equipment are only part of the success of fungus and mold removal. Knowledge and experience add to the arsenal of Guru Restoration service and guarantee an accurate victory over fungus and mold.
