Replacing The Wire In A Harken Roller Furling Headstay

I realize how boring videos like this are, sorry, but I'm pretty sure that there are a few people who will appreciate parts of it. I have doubled the speed figuring people could slow down any parts they wanted to see at normal speed.
I'm happy to answer any questions or clear up anything confusing.
Such as which way to rotate the extrusions when passing the wire through to get it past the connectors. Hint, rotate it in the direction that won't unlay the wire. It really sucks when that happens. (please don't ask me how I know that).

This was the headstay on a IP 35". The wire size is 5/16" or 8mm.
The Harken(Turnbuckle) was turned almost all the down so I knew I needed to make the new wire a little shorter. As it turned out, I could have shortened it even more. However, the link plates on the bottom, which I noted should actually be terminated in a toggle, could be cut off, a new hole drilled and a toggle added sometime in the future. At that time, the modified or new link plates could be fabricated shorter in order to add some adjustment back.