Click to copy, then share by pasting into your messages, comments, social media posts and websites.
Click to copy, then add into your webpages so users can view and engage with this video from your site.
Report Content
We also accept reports via email. Please see the Guidelines Enforcement Process for instructions on how to make a request via email.
Thank you for submitting your report
We will investigate and take the appropriate action.
Infrared LED Light Bar System - Spot/Flood Light Combination
The Larson Electronics LEDLB-24SF-IR LED Light Bar offers high infrared light output and extreme durability for demanding operating conditions. This IP68 rated infrared LED light bar is waterproof to three meters and produces an infrared light beam 900` long by 100` wide light that can only be seen through the use of night vision goggles. 850Nm versions have a very slight red glow around the LED emitters when veiwed from a certain angle while 940Nm versions are completely invisible to the naked eye. Dual spot and flood optics combined with seperate power sources allow for switching from spot to flood with a flip of a switch. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged infrared lighting solution that is ideal for use in commercial and industrial security applications as well as military environments.
The LEDLB-24SF-IR infrared LED light bar produces light in the infrared 850Nm or 940Nm end of the light spectrum depending upon the version selected. In spot configuration this infrared LED emitter produces a 900` long by 100` wide infrared beam of light with a tight focus and moderate beam spread. In flood configuration this infrared LED light produces a 400` long by 225` wide spread infrared beam concentrated much closer to fixture. Twenty-four Edison Edixeon® 3 watt infrared emitters are arranged in rows and paired with high purity 10 degree spot and 35 degree flood optics to produce a tightly focused spot beam with limited spread or light spillage. Seperate power supply connections allow operators to change from spot to flood with a 3-way toggle switch.
These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The entire LEDLB series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
Category | Science & Technology |
Sensitivity | Normal - Content that is suitable for ages 16 and over |
Playing Next
Related Videos
10 KVA Overhead Distribution Transformer, Pole Mount
1 day, 16 hours ago
Aviation Low Intensity LED Light - FAA Compliant - Red
2 days, 16 hours ago
How to Operate the 30' Portable Solar Surveillance Tower with PTZ Security Cameras
3 days, 17 hours ago
Power Distribution Panel - 60A 208Y/120V 3-Phase - Nema 4X Corrosion Resistant
6 days, 17 hours ago
Warning - This video exceeds your sensitivity preference!
To dismiss this warning and continue to watch the video please click on the button below.
Note - Autoplay has been disabled for this video.