shell chamber close to 1 inch SCH 80 pipe ID, barrel bore close to 3/4 inch SCH 40 pipe ;-)
The MasterBlaster system is the most productive and cost-efficient way to remove virtually any type of build-ups in boilers, kilns, silos, quarntional l…
shell chamber close to 1 inch SCH 80 pipe ID, barrel bore close to 3/4 inch SCH 40 pipe ;-)
The MasterBlaster system is the most productive and cost-efficient way to remove virtually any type of build-ups in boilers, kilns, silos, quarntional loads. And like all of our other UMC offerings, our LeadLess cartridges offer a truly economical value for high-volume shooters without any compromise in quality or performance.
The MasterBlaster is perfect for knocking out or knocking down material rings in rotary kilns processing cement, lime, phosphate, zinc, manganese, and many other metallic and nonmetallic products. Since there is no need to stop production and wait for "cool-down", you can break up rings and balls before they interfere with production flow.
A: Breech block is mortised into yoke/receiver to enhance strength and reliability while reducing down-
time. Breech and barrel are forged from specially developed ordnance steel.
B: Redesigned coil springs reduce shock for greater gun stability and improved accuracy shot after shot.
C: The mount assembly with large elevation wheel and traverse assembly, are designed for unerring
accuracy.
D: Powerful, oversized muffler reduces noise level up to 50%. Welded casing construction enables easy
removal.
How to Shoot Out Clinker Rings and Balls
The basic procedure is to cut a keyway through the ring. This notch normally is shot first in the eleven o'clock or one o'clock position of the ring. In many cases, turning over the kiln once or twice after the keyway is cut will cause the remainder of the ring to drop out. If this does not occur, a few well placed shots, or a second keyway cut on the opposite side, will generally cause the ring to drop.
Today, the Remington MasterBlaster represents the culmination of over 50 years of engineering refinements and technological innovation. The MasterBlaster system is the most productive and cost-efficient way to remove virtually any type of build-ups in boilers, kilns, silo..
