An easy thing to use for support of your diy metal awning is a baluster. They are usually cheap and can do a lot.
⏱️⏱️Chapters⏱️⏱️
00:00 Follow along with a handyman
00:25 Using Balusters as Support
02:00 Be an American, not an American't
🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: [email protected]
➤ Follow https://straightarrowrepair.com/pipf
➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf
➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair
Hi, I'm Phil Bridges, owner of Straight Arrow Repair. Ever want to know how a repairman fixes things? Well come with me, and I'll show you how I solve problems. Let's make things better together.
Okay, these are balusters. You don't have to use this material. This is something that it's lightweight, not very invasive to look at. But if you choose to, do we get 60 miles an hour winds? The trick is not to be, what is the words? Too high as to catch wind and too low as to block your door. So if you get high, it catches wind, pulls it off, gives a lot of stress, and you have to determine what you can do to keep it lower.
So as the wind will blow on top, push it down anyway, these are inch and half by inch and a half by 42 inches long. Use them for porches and such. And I'm going to cut a 45 with this battery powered. All right, and then I'm going to use three-inch screws with a screw gun.
And it's going to go. Right in to where this rib is. You want to turn that angle where it will fall out on, on the building.
This is Phil Bridges, if you like what you saw and think it might be helpful to somebody else, push that like button and let other people know what you and I know, and we'll work together toward making a brighter future. By the way, we're not Amera-Can'ts, we're Americans. See you next time.
awning diy,awning installation,awning installation on roof,diy home improvement,diy patio cover,home improvement,how to seal a metal awning,metal awning,metal awning build,metal awning design,metal awning diy,metal awning ideas,metal awning installation,metal roofing installation,metal roofing installation on shed,metal roofing tips and tricks,Mobile home repair,shed awning,shed awning diy,shed awning ideas,shed door awning,Straight Arrow Repair
